New Drug Approvals
Follow New Drug Approvals on WordPress.com

FLAGS AND HITS

Flag Counter
DRUG APPROVALS BY DR ANTHONY MELVIN CRASTO

Archives

Categories

Join me on Linkedin

View Anthony Melvin Crasto Ph.D's profile on LinkedIn

Join me on Researchgate

Anthony Melvin Crasto Dr.

  Join me on Facebook FACEBOOK   ...................................................................Join me on twitter Follow amcrasto on Twitter     ..................................................................Join me on google plus Googleplus

MYSELF

DR ANTHONY MELVIN CRASTO Ph.D ( ICT, Mumbai) , INDIA 36Yrs Exp. in the feld of Organic Chemistry,Working for AFRICURE PHARMA as ADVISOR earlier with GLENMARK PHARMA at Navi Mumbai, INDIA. Serving chemists around the world. Helping them with websites on Chemistry.Million hits on google, NO ADVERTISEMENTS , ACADEMIC , NON COMMERCIAL SITE, world acclamation from industry, academia, drug authorities for websites, blogs and educational contribution, ........amcrasto@gmail.com..........+91 9323115463, Skype amcrasto64 View Anthony Melvin Crasto Ph.D's profile on LinkedIn Anthony Melvin Crasto Dr.

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 37.9K other subscribers
DR ANTHONY MELVIN CRASTO Ph.D

DR ANTHONY MELVIN CRASTO Ph.D

DR ANTHONY MELVIN CRASTO, Born in Mumbai in 1964 and graduated from Mumbai University, Completed his Ph.D from ICT, 1991,Matunga, Mumbai, India, in Organic Chemistry, The thesis topic was Synthesis of Novel Pyrethroid Analogues, Currently he is working with AFRICURE PHARMA, ROW2TECH, NIPER-G, Department of Pharmaceuticals, Ministry of Chemicals and Fertilizers, Govt. of India as ADVISOR, earlier assignment was with GLENMARK LIFE SCIENCES LTD, as CONSUlTANT, Retired from GLENMARK in Jan2022 Research Centre as Principal Scientist, Process Research (bulk actives) at Mahape, Navi Mumbai, India. Total Industry exp 32 plus yrs, Prior to joining Glenmark, he has worked with major multinationals like Hoechst Marion Roussel, now Sanofi, Searle India Ltd, now RPG lifesciences, etc. He has worked with notable scientists like Dr K Nagarajan, Dr Ralph Stapel, Prof S Seshadri, etc, He did custom synthesis for major multinationals in his career like BASF, Novartis, Sanofi, etc., He has worked in Discovery, Natural products, Bulk drugs, Generics, Intermediates, Fine chemicals, Neutraceuticals, GMP, Scaleups, etc, he is now helping millions, has 9 million plus hits on Google on all Organic chemistry websites. His friends call him Open superstar worlddrugtracker. His New Drug Approvals, Green Chemistry International, All about drugs, Eurekamoments, Organic spectroscopy international, etc in organic chemistry are some most read blogs He has hands on experience in initiation and developing novel routes for drug molecules and implementation them on commercial scale over a 32 PLUS year tenure till date Feb 2023, Around 35 plus products in his career. He has good knowledge of IPM, GMP, Regulatory aspects, he has several International patents published worldwide . He has good proficiency in Technology transfer, Spectroscopy, Stereochemistry, Synthesis, Polymorphism etc., He suffered a paralytic stroke/ Acute Transverse mylitis in Dec 2007 and is 90 %Paralysed, He is bound to a wheelchair, this seems to have injected feul in him to help chemists all around the world, he is more active than before and is pushing boundaries, He has 100 million plus hits on Google, 2.5 lakh plus connections on all networking sites, 100 Lakh plus views on dozen plus blogs, 227 countries, 7 continents, He makes himself available to all, contact him on +91 9323115463, email amcrasto@gmail.com, Twitter, @amcrasto , He lives and will die for his family, 90% paralysis cannot kill his soul., Notably he has 38 lakh plus views on New Drug Approvals Blog in 227 countries......https://newdrugapprovals.wordpress.com/ , He appreciates the help he gets from one and all, Friends, Family, Glenmark, Readers, Wellwishers, Doctors, Drug authorities, His Contacts, Physiotherapist, etc He has total of 32 International and Indian awards

Verified Services

View Full Profile →

Recent Posts

ENZYMES AS GREEN CATALYSTS FOR PHARMACUETICAL INDUSTRY


DR ANTHONY MELVIN CRASTO Ph.D's avatarGreen Chemistry International

Image result for Novozymes

ENZYMES AS GREEN CATALYSTS FOR PHARMACUETICAL INDUSTRY

‘Green’ Catalysts for ‘greener’ reactions
– Dr. Dinesh Nair, Regional Business Manager at Novozymes South Asia Pvt. Ltd

Image result for Novozymes

/////////Novozymes, ENZYMES, GREEN CATALYSTS, PHARMACEUTICAL INDUSTRY, ‘Green’ Catalysts, ‘greener’ reactions

View original post

BMS-986115


Figure imgf000170_0002

BMS-986115
CAS 1584647-27-7

(2R,3S)-N-((3S)-5-(3-Fluorophenyl)-9-methyl-2-oxo-2,3-dihydro-lH-l,4-benzodiazepin- 3-yl)-2, -bis(3,3,3-trifluoropropyl)succinamide

MW: 574.4945,  C26-H25-F7-N4-O3, UNII: LSK1L593UU

10-Nitrooleate, CTK3B7458, CTK3C3167, 9-Octadecenoic acid, 10-nitro-, 875685-46-4, AG-L-63109, 9-Octadecenoic acid, 10-nitro-, (9E)-, 88127-53-1

FOR advanced solid tumors

  • Originator Bristol-Myers Squibb
  • Class Antineoplastics
  • Mechanism of Action Amyloid precursor protein secretase inhibitors; Notch signalling pathway inhibitors
  • Phase I Solid tumours

Most Recent Events

  • 30 Aug 2016Bristol-Myers Squibb terminates a phase I trial for Solid tumours (late-stage disease, second-line therapy or greater) in USA, Australia and Canada (NCT01986218)
  • 25 Jan 2016Bristol-Myers Squibb completes enrolment in its phase I trial for Solid tumours in USA, Australia and Canada (NCT01986218)
  • 31 Dec 2013Phase-I clinical trials in Solid tumours (late-stage disease) in Canada & Australia (Oral)

DETAILS WILL BE UPDATED SOON………….

BMS-986115 is an orally bioavailable, gamma secretase (GS) and pan-Notch inhibitor, with potential antineoplastic activity. Upon administration, GS/pan-Notch inhibitor BMS 986115 binds to GS and blocks the proteolytic cleavage and release of the Notch intracellular domain (NICD), which would normally follow ligand binding to the extracellular domain of the Notch receptor. This prevents both the subsequent translocation of NICD to the nucleus to form a transcription factor complex and the expression of Notch-regulated genes. This results in the induction of apoptosis and the inhibition of growth of tumor cells that overexpress Notch. Overexpression of the Notch signaling pathway plays an important role in tumor cell proliferation and survival

 

Bristol-Myers Squibb
Ashvinikumar V. Gavai, George V. Delucca,Daniel O’MALLEY, Patrice Gill, Claude A. Quesnelle, Brian E. Fink, Yufen Zhao,Francis Y. Lee,
Applicant Bristol-Myers Squibb Company

str2

Ashvinikumar Gavai

Claude Quesnelle

Claude Quesnelle
Senior Research Investigator/Chemist at Bristol-Myers Squibb

str2

RICHARD LEE

 

 

 

Patrice Gill

Patrice Gill

Research scientist at BMS

Dan O’Malley (Rice University)
Currently: Bristol-Myers Squibb

PICTURES WILL BE UPDATED………….

Useful for the treatment of conditions related to the Notch pathway, such as cancer and other proliferative diseases.

Notch signaling has been implicated in a variety of cellular processes, such as cell fate specification, differentiation, proliferation, apoptosis, and angiogenesis. (Bray, Nature Reviews Molecular Cell Biology, 7:678-689 (2006); Fortini, Developmental Cell 16:633-647 (2009)). The Notch proteins are single-pass heterodimeric transmembrane molecules. The Notch family includes 4 receptors, NOTCH 1-4, which become activated upon binding to ligands from the DSL family (Delta-like 1, 3, 4 and Jagged 1 and 2).

The activation and maturation of NOTCH requires a series of processing steps, including a proteolytic cleavage step mediated by gamma secretase, a multiprotein complex containing Presenilin 1 or Presenilin 2, nicastrin, APH1, and PEN2. Once NOTCH is cleaved, NOTCH intracellular domain (NICD) is released from the membrane. The released NICD translocates to the nucleus, where it functions as a transcriptional activator in concert with CSL family members (RBPSUH, “suppressor of hairless”, and LAG1). NOTCH target genes include HES family members, such as HES- 1. HES- 1 functions as transcriptional repressors of genes such as HERP 1 (also known as HEY2), HERP2 (also known as HEY1), and HATH1 (also known as ATOH1).

The aberrant activation of the Notch pathway contributes to tumorigenesis. Activation of Notch signaling has been implicated in the pathogenesis of various solid tumors including ovarian, pancreatic, as well as breast cancer and hematologic tumors such as leukemias, lymphomas, and multiple myeloma. The role of Notch inhibition and its utility in the treatment of various solid and hematological tumors are described in Miele, L. et al, Current Cancer Drug Targets, 6:313-323 (2006); Bolos, V. et al, Endocrine Reviews, 28:339-363 (2007); Shih, I.-M. et al, Cancer Research, 67: 1879- 1882 (2007); Yamaguchi, N. et al., Cancer Research, 68: 1881-1888 (2008); Miele, L., Expert Review Anti-cancer Therapy, 8: 1 197-1201 (2008); Purow, B., Current Pharmaceutical Biotechnology, 10: 154-160 (2009); Nefedova, Y. et al, Drug Resistance Updates, 1 1 :210-218 (2008); Dufraine, J. et al, Oncogene, 27:5132-5137 (2008); and Jun, H.T. et al, Drug Development Research, 69:319-328 (2008).

There remains a need for compounds that are useful as Notch inhibitors and that have sufficient metabolic stability to provide efficacious levels of drug exposure. Further, there remains a need for compounds useful as Notch inhibitors that can be orally or intravenously administered to a patient.

U.S. Patent No. 7,053,084 Bl discloses succinoylamino benzodiazepine compounds useful for treating neurological disorders such as Alzheimer’s Disease. The reference discloses that these succinoylamino benzodiazepine compounds inhibit gamma secretase activity and the processing of amyloid precursor protein linked to the formation of neurological deposits of amyloid protein. The reference does not disclose the use of these compounds in the treatment of proliferative diseases such as cancer.

Applicants have found potent compounds that have activity as Notch inhibitors and have sufficient metabolic stability to provide efficacious levels of drug exposure upon intravenous or oral administration. These compounds are provided to be useful as pharmaceuticals with desirable stability, bioavailability, therapeutic index, and toxicity values that are important to their drugability.

Image result for BMS 906024

Image result for BMS 906024 synthesis

PATENTS

US-20150166489-A1

https://patentscope.wipo.int/search/en/detail.jsf?docId=US137591635&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCTDescription

PATENT

US-20140087992-A1

https://www.google.com/patents/US20140087992

Example 1(2R,3S)—N-((3S)-5-(3-Fluorophenyl)-9-methyl-2-oxo-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)-2,3-bis(3,3,3-trifluoropropyl)succinamideFigure US20140087992A1-20140327-C00138

Intermediate 1A: (2S,3R)-tert-Butyl 6,6,6-trifluoro-3-(((S)-5-(3-fluorophenyl)-9-methyl-2-oxo-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoate

Figure US20140087992A1-20140327-C00139

In a 100 mL round-bottomed flask, a solution of Intermediate B-1 (1683 mg, 5.94 mmol), Et3N (1.656 mL, 11.88 mmol), and Intermediate S-1 in DMF (20 mL) was treated with o-benzotriazol-1-yl-N,N,N′,N′-tetramethyluronium tetrafluoroborate (3815 mg, 11.88 mmol) and stirred at room temperature for 1 hour. The reaction mixture was diluted with water and saturated aqueous NaHCO3. An off white precipitate formed and was filtered and washed with water. The resulting solid was dried on the filter under a stream of nitrogen to give Intermediate 1A (3.7 g, 99% yield). MS (ES): m/z=632.4[M+H+]; HPLC: RT=3.635 min Purity=98%. (H2O/MeOH with TFA, CHROMOLITH® ODS S5 4.6×50 mm, gradient=4 min, wavelength=220 nm). 1H NMR (400 MHz, methanol-d4) δ 7.53 (t, J=4.5 Hz, 1H), 7.46-7.30 (m, 3H), 7.28-7.23 (m, 1H), 7.23-7.18 (m, 2H), 5.37 (s, 1H), 2.88 (td, J=10.4, 3.4Hz, 1H), 2.60 (td, J=10.2, 4.1 Hz, 1H), 2.54-2.40 (m, 1H), 2.47 (s, 3H), 2.33-2.12 (m, 3H), 1.98-1.69 (m, 4H), 1.51 (s, 9H).

Intermediate 1B: (2S,3R)-6,6,6-Trifluoro-3-(((S)-5-(3-fluorophenyl)-9-methyl-2-oxo-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid

Figure US20140087992A1-20140327-C00140

In a 250 mL round-bottomed flask, a solution of Intermediate 1A (3.7 g, 5.86 mmol) in DCM (25 mL) was treated with TFA (25 mL) and the resulting pale orange solution was stirred at room temperature for 1.5 hours. The reaction mixture was then concentrated to give Intermediate 1B. HPLC: RT=3.12 min (H2O/MeOH with TFA, CHROMOLITH® ODS S5 4.6×50 mm, gradient=4 min, wavelength=220 nm). MS (ES): m/z=576.3 (M+H)+. 1H NMR (400 MHz, methanol-d4) δ 7.54 (t, J=4.5 Hz, 1H), 7.49-7.29 (m, 3H), 7.28-7.15 (m, 3H), 5.38 (br. s., 1H), 2.89 (td, J=10.3, 3.7 Hz, 1H), 2.67 (td, J=9.9, 4.2Hz, 1H), 2.56-2.38 (m, 1H), 2.48 (s, 3H), 2.34-2.13 (m, 3H), 2.00-1.71 (m, 4H).

Example 1

In a 250 mL round-bottomed flask, a solution of Intermediate 1B (4.04 g, 5.86 mmol) in THF (50 mL) was treated with ammonia (2M in iPrOH) (26.4 mL, 52.7 mmol), followed by HOBT (1.795 g, 11.72 mmol) and EDC (2.246 g, 11.72 mmol). The resulting white suspension was stirred at room temperature overnight. The reaction mixture was diluted with water and saturated aqueous NaHCO3. The resulting solid was filtered, rinsed with water and then dried on the filter under a stream of nitrogen. The crude product was suspended in 20 mL of iPrOH and stirred at room temperature for 20 min and then filtered and washed with iPrOH and dried under vacuum to give 2.83 g of solid. The solid was dissolved in refluxing EtOH (100 mL) and slowly treated with 200 mg activated charcoal added in small portions. The hot mixture was filtered through CELITE® and rinsed with hot EtOH. The filtrate was reduced to half volume, allowed to cool and the white precipitate formed was filtered and rinsed with EtOH to give 2.57 g of white solid. A second recrystallization from EtOH (70 mL) afforded Example 1 (2.39 g, 70% yield) as a white solid. HPLC: RT=10.859 min (H2O/CH3CN with TFA, Sunfire C18 3.5 μm, 3.0×150 mm, gradient=15 min, wavelength=220 and 254 nm); MS (ES): m/z=575.3 [M+H+]; 1H NMR (400 MHz, methanol-d4) δ 7.57-7.50 (m, 1H), 7.47-7.30 (m, 3H), 7.29-7.15 (m, 3H), 5.38 (s, 1H), 2.85-2.75 (m, 1H), 2.59 (td, J=10.5, 4.0 Hz, 1H), 2.53-2.41 (m, 4H), 2.31-2.10 (m, 3H), 1.96-1.70 (m, 4H).

 

PATENT

WO-2014047372-A1

https://www.google.com/patents/WO2014047372A1?cl=en

Figure imgf000041_0001

Figure imgf000042_0001

Scheme 3

Figure imgf000044_0001
Figure imgf000045_0001

XII XI

Scheme 4

Figure imgf000047_0001

Intermediate S-l : (2R,3S)-3-(fert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000053_0001

Intermediate S-IA: 3,3,3-Trifluoro ropyl trifluoromethanesulfonate

Figure imgf000053_0002

[00180] To a cold (-25 °C) stirred solution of 2,6-lutidine (18.38 mL, 158 mmol) in DCM (120 mL) was added Tf20 (24.88 mL, 147 mmol) over 3 min, and the mixture was stirred for 5 min. To the reaction mixture was added 3,3,3-trifluoropropan-l-ol (12 g, 105 mmol) over an interval of 3 min. After 2 hr, the reaction mixture was warmed to room temperature and stirred for 1 hr. The reaction mixture was concentrated to half its volume, then purified by loading directly on a silica gel column (330g ISCO) and the product was eluted with DCM to afford Intermediate S-IA (13.74 g, 53%) as a colorless oil. 1H NMR (400 MHz, CDC13) δ ppm 4.71 (2 H, t, J= 6.15 Hz), 2.49-2.86 (2 H, m).

Intermediate S-1B: (4S)-4-Benzyl-3-(5,5,5-trifluoropentanoyl)-l,3-oxazolidin-2-one

Figure imgf000054_0001

[00181] To a stirring solution of 5,5,5-trifluoropentanoic acid (14.76 g, 95 mmol) and DMF (0.146 rriL) in DCM (50 mL) was slowly added oxalyl chloride (8.27 mL, 95 mmol). After 2h, the mixture was concentrated to dryness. A separate flask was changed with (S)-4-benzyloxazolidin-2-one (16.75 g, 95 mmol) in THF (100 mL) and then cooled to -78 °C. To the solution was slowly added n-BuLi (2.5M, 37.8 mL, 95 mmol) over 10 min, stirred for 10 min, and then a solution of the above acid chloride in THF (50 mL) was slowly added over 5 min. The mixture was stirred for 30 min, and then warmed to room temperature. The reaction was quenched with sat aq NH4C1. Next, 10% aq LiCl was then added to the mixture, and the mixture was extracted with Et20. The organic layer was washed with sat aq NaHC03 then with brine, dried (MgSC^), filtered and concentrated to dryness. The residue was purified by Si02 chromatography (ISCO, 330 g column, eluting with a gradient from 100% hexane to 100% EtOAc) to afford the product Intermediate S-IB; (25.25 g, 85%): 1H NMR (400 MHz, CDC13) δ ppm 7.32-7.39 (2 H, m), 7.30 (1 H, d, J= 7.05 Hz), 7.18-7.25 (2 H, m), 4.64-4.74 (1 H, m), 4.17-4.27 (2 H, m), 3.31 (1 H, dd, J= 13.35, 3.27 Hz), 3.00-3.11 (2 H, m), 2.79 (1 H, dd, J= 13.35, 9.57 Hz), 2.16-2.28 (2 H, m), 1.93-2.04 (2 H, m).

Intermediate S-IC: tert- utyl (3R)-3-(((4S)-4-benzyl-2-oxo-l,3-oxazolidin-3- yl)carbonyl)-6,6,6-trifluoroh xanoate

Figure imgf000054_0002

[00182] To a cold (-78 °C), stirred solution of Intermediate S-IB (3.03 g, 9.61 mmol) in THF (20 mL) was added NaHMDS (1.0M in THF) (10.6 mL, 10.60 mmol) under a nitrogen atmosphere. After 2 hours, tert-butyl 2-bromoacetate (5.62 g, 28.8 mmol) was added neat via syringe at -78 °C and stirring was maintained at the same temperature. After 6 hours, the reaction mixture was warmed to room temperature. The reaction mixture was partitioned between saturated NH4C1 and EtOAc. The organic phase was separated, and the aqueous phase was extracted with EtOAc (3x). The combined organics were washed with brine, dried (Na2s04), filtered and concentrated under reduced pressure. The residue was purified by flash chromatography (Teledyne ISCO

CombiFlash Rf, 5% to 100% solvent A/B = hexanes/EtOAc, REDISEP® Si02 120g). Concentration of the appropriate fractions provided Intermediate S-1C (2.79 g, 67.6%) as a colorless viscous oil: 1H NMR (400 MHz, CDC13) δ ppm 7.34 (2 H, d, J= 7.30 Hz), 7.24-7.32 (3 H, m), 4.62-4.75 (1 H, m, J= 10.17, 6.89, 3.43, 3.43 Hz), 4.15-4.25 (3 H, m), 3.35 (1 H, dd, J= 13.60, 3.27 Hz), 2.84 (1 H, dd, J= 16.62, 9.57 Hz), 2.75 (1 H, dd, J = 13.35, 10.07 Hz), 2.47 (1 H, dd, J= 16.62, 4.78 Hz), 2.11-2.23 (2 H, m), 1.90-2.02 (1 H, m), 1.72-1.84 (1 H, m), 1.44 (9 H, s).

Intermediate S-ID: (2R)-2-( -tert-Butoxy-2-oxoethyl)-5,5,5-trifluoropentanoic acid

Figure imgf000055_0001

[00183] To a cool (0 °C), stirred solution of Intermediate S-1C (2.17 g, 5.05 mmol) in THF (50 mL) and water (15 mL) was added a solution of LiOH (0.242 g, 10.11 mmol) and H202 (2.065 mL, 20.21 mmol) in H20 (2 mL). After 10 min, the reaction mixture was removed from the ice bath, stirred for lh, and then cooled to 0 °C. Saturated aqueous NaHCC”3 (25 mL) and saturated aqueous Na2s03 (25 mL) were added to the reaction mixture, and the mixture was stirred for 10 min, and then partially concentrated. The resulting mixture was extracted with DCM (2x), cooled with ice and made acidic with cone. HC1 to pH 3. The mixture was saturated with solid NaCl, extracted with EtOAc (3x), and then dried over MgS04, filtered and concentrated to a colorless oil to afford Intermediate S-ID, 1.2514g, 92%): 1H NMR (400 MHz, CDCI3) δ ppm 2.83-2.95 (1 H, m), 2.62-2.74 (1 H, m), 2.45 (1 H, dd, J= 16.62, 5.79 Hz), 2.15-2.27 (2 H, m), 1.88-2.00 (1 H, m), 1.75-1.88 (1 H, m), 1.45 (9 H, s). Intermediate S-l : (2R,3S)-3-(fert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid, and Intermediate S-1E: (2R,3R)-3-(tert-butoxycarbonyl)- 6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid

Figure imgf000056_0001

(S-1E)

[00184] To a cold (-78 °C) stirred solution of Intermediate S-1D (5 g, 18.50 mmol) in THF (60 mL) was slowly added LDA (22.2 mL, 44.4 mmol, 2.0M) over 7 min. After stirring for 2 hr, Intermediate S- 1 A (6.38 g, 25.9 mmol) was added to the reaction mixture over 3 min. After 60 min, the reaction mixture was warmed to -25 °C

(ice/MeOH/dry ice) and stirred for an additional 60 min at which time sat aq NH4C1 was added. The separated aqueous phase was acidified with IN HC1 to pH 3, and then extracted with Et20. The combined organic layers were washed with brine (2x), dried over MgS04, filtered and concentrated to provide a 1 :4 (II :I1E) mixture (as determined by 1H NMR) of Intermediate S-l and Intermediate S-1E (6.00 g, 89%) as a pale yellow solid. 1H NMR (500 MHz, CDC13) δ ppm 2.81 (1 H, ddd, J = 10.17, 6.32, 3.85 Hz), 2.63- 2.76 (1 H, m), 2.02-2.33 (4 H, m), 1.86-1.99 (2 H, m), 1.68-1.85 (2 H, m), 1.47 (9 H, s).

[00185] To a cold (-78 °C), stirred solution of a mixture of Intermediate S-l and Intermediate S-1E (5.97 g, 16.30 mmol) in THF (91 mL) was added LDA (19 mL, 38.0 mmol, 2.0M in THF/hexane/ethyl benzene) dropwise via syringe over 10 min (internal temperature never exceeded -65 °C, J-KEM® probe in reaction solution). The mixture was stirred for 15 min, and then warmed to room temperature (24 °C water bath), stirred for 15 min, and then cooled to -78 °C for 15 min. To the reaction mixture was added Et2AlCl (41 mL, 41.0 mmol, 1M in hexane) via syringe (internal temperature never exceeded -55 °C), and the mixture was stirred for 10 min, and then warmed to room temperature (24 °C bath) for 15 min and then back to -78 °C for 15 min. Meanwhile, a 1000 mL round bottom flask was charged with MeOH (145 mL) and precooled to -78 °C. With vigorous stirring the reaction mixture was transferred via cannula over 5 min to the MeOH. The flask was removed from the bath, ice was added followed by the slow addition of IN HC1 (147 mL, 147 mmol). Gas evolution was observed as the HC1 was added. The reaction mixture was allowed to warm to room temperature during which the gas evolution subsided. The reaction mixture was diluted with EtOAc (750 mL), saturated with NaCl, and the organic phase was separated, washed with a solution of potassium fluoride (8.52 g, 147 mmol) and IN HC1 (41 mL, 41.0 mmol) in water (291 mL), brine (100 mL), and then dried (Na2s04), filtered and concentrated under vacuum. 1H NMR showed the product was a 9: 1 mixture of Intermediate S-l and Intermediate S- 1E. The enriched mixture of Intermediate S-l and Intermediate S-1E (6.12 g, >99% yield) was obtained as a dark amber solid: 1H NMR (400 MHz, CDC13) δ ppm 2.64-2.76 (2 H, m), 2.04-2.35 (4 H, m), 1.88-2.00 (2 H, m), 1.71-1.83 (2 H, m), 1.48 (9 H, s).

Alternate procedure to make Intermediate S-l :

Intermediate S-IF: (2R,3 -1 -Benzyl 4-tert-butyl 2,3-bis(3,3,3-trifluoropropyl)succinate

Figure imgf000057_0001

[00186] To a stirred solution of a 9: 1 enriched mixture of Intermediate S-l and Intermediate S-1E (5.98 g, 16.33 mmol) in DMF (63 mL) were added potassium carbonate (4.06 g, 29.4 mmol) and benzyl bromide (2.9 mL, 24.38 mmol), the mixture was then stirred overnight at room temperature. The reaction mixture was diluted with EtOAc (1000 mL), washed with 10% LiCl (3×200 mL), brine (200 mL), dried (Na2S04), filtered, concentrated, and then dried under vacuum. The residue was purified by Si02 chromatography using a toluene:hexane gradient. Diastereomerically purified

Intermediate S-IF (4.81g, 65%) was obtained as a colorless solid: 1H NMR (400 MHz, chloroform-d) δ 7.32-7.43 (m, 5H), 5.19 (d, J= 12.10 Hz, 1H), 5.15 (d, J= 12.10 Hz, 1H), 2.71 (dt, J= 3.52, 9.20 Hz, 1H), 2.61 (dt, J= 3.63, 9.63 Hz, 1H), 1.96-2.21 (m, 4H), 1.69-1.96 (m, 3H), 1.56-1.67 (m, 1H), 1.45 (s, 9H).

Intermediate S-l : (2R,3S)-3-(fert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000058_0001

[00187] To a solution of Intermediate S-1F (4.81 g, 10.54 mmol) in MeOH (100 mL) was added 10% palladium on carbon (wet, Degussa type, 568.0 mg, 0.534 mmol) in a H2– pressure flask. The vessel was purged with N2 (4x), then purged with H2 (2x), and finally, pressurized to 50 psi and shaken overnight. The reaction vessel was

depressurized and purged with nitrogen. The mixture was filtered through CELITE®, washed with MeOH and then concentrated and dried under vacuum. Intermediate S-1 (3.81 g, 99% yield)) was obtained as a colorless solid: 1H NMR (400 MHz, chloroform-d) δ 2.62-2.79 (m, 2H), 2.02-2.40 (m, 4H), 1.87-2.00 (m, 2H), 1.67-1.84 (m, 2H), 1.48 (s, 9H).

Alternate procedure to make Intermediate S-1 :

Intermediate S-1 : (2R,3S)-3-(fert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000058_0002

[00188] Intermediate S-1 as a mixture with Intermediate S-IE was prepared in a similar procedure as above from Intermediate S-1D to afford a 1 :2.2 mixture of

Intermediate S-1 and Intermediate S-IE (8.60 g, 23.48 mmol), which was enriched using LDA (2.0 M solution in THF, ethyl benzene and heptane, 28.2 mL, 56.4 mmol) and diethyl aluminum chloride (1.0 M solution in hexane, 59 mL, 59.0 mmol) in THF (91 mL). After workup as described above, the resulting residue was found to be a 13.2: 1 (by 1H NMR) mixture of Intermediate S-1 and Intermediate S-IE, which was treated as follows: The crude material was dissolved in MTBE (43 mL). Hexanes (26 mL) were slowly charged to the reaction mixture while maintaining a temperature below 30 °C. The reaction mixture was stirred for 10 min. Next, tert-butylamine (2.7 mL, 1.1 eq) was charged slowly over a period of 20 minutes while maintaining a temperature below 30 °C. This addition was observed to be exothermic. The reaction mixture was stirred for 2 hrs below 30 °C and then filtered. The solid material was washed with 5:3 MTBE: hexane (80 mL), and the filtrate was concentrated and set aside. The filtered solid was dissolved in dichloromethane (300 mL), washed with IN HC1 (lOOmL), and the organic layer was washed with brine (100 mL x 2), and then concentrated under reduced pressure below 45 °C to afford Intermediate S-l (5.46 g, 64%).

A second alternate procedure for preparing Intermediate S-l :

Intermediate S-1G: tert- utyl 5,5,5-trifluoropentanoate

Figure imgf000059_0001

[00189] To a stirred solution of 5,5,5-trifluoropentanoic acid (5 g, 32.0 mmol) in THF (30 mL) and hexane (30 mL) at 0 °C, was added tert-butyl 2,2,2-trichloroacetimidate (11.46 mL, 64.1 mmol). The mixture was stirred for 15 min at 0 °C. Boron trifluoride etherate (0.406 mL, 3.20 mmol) was added and the reaction mixture was allowed to warm to room temperature overnight. To the clear reaction mixture was added solid NaHC03 (5 g) and stirred for 30 min. The mixture was filtered through MgSC^ and washed with hexanes (200 mL). The solution was allowed to rest for 45 min, and the resulting solid material was removed by filtering on the same MgSC^ filter again, washed with hexanes (100 mL) and concentrated under reduced pressure without heat. The volume was reduced to about 30 mL, filtered through a clean fritted funnel, washed with hexane (5 mL), and then concentrated under reduced pressure without heat. The resulting neat oil was filtered through a 0.45μιη nylon membrane filter disk to provide Intermediate S-1G (6.6 g, 31.4 mmol 98% yield) as a colorless oil: 1H NMR (400 MHz, CDC13) δ ppm 1.38 (s, 9 H) 1.74-1.83 (m, 2 H) 2.00-2.13 (m, 2 H) 2.24 (t, J= 7.28 Hz, 2 H). Intermediate S-1H: (4S)-4-(Propan-2-yl)-3-(5,5,5-trifluoropentanoyl)-l,3-oxazolidin-2- one

Figure imgf000060_0001

[00190] To a stirred solution of 5,5,5-trifluoropentanoic acid (5.04 g, 32.3 mmol) in DCM (50 mL) and DMF (3 drops) was added oxalyl chloride (3.4 mL, 38.8 mmol) dropwise over 5 min. The solution was stirred until all bubbling subsided. The reaction mixture was concentrated under reduced pressure to give pale yellow oil. To a separate flask charged with a solution of (4S)-4-(propan-2-yl)-l,3-oxazolidin-2-one (4.18 g, 32.4 mmol) in THF (100 mL) at -78 °C was added n-BuLi (2.5M in hexane) (13.0 mL, 32.5 mmol) dropwise via syringe over 5 min. After stirring for 10 min, the above acid chloride, dissolved in THF (20 mL), was added via cannula over 15 min. The reaction mixture was warmed to 0 °C, and was allowed to warm to room temperature as the bath warmed and stirred overnight. To the reaction mixture was added saturated NH4C1, and the mixture was extracted with EtOAc (2x). The combined organics were washed with brine, dried (Na2s04), filtered and concentrated under reduced pressure. The crude material was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 5% to 60% solvent A/B = hexanes/EtOAc, REDISEP® Si02 120g). Concentration of the appropriate fractions provided Intermediate S-1H (7.39 g, 86%) as a colorless oil: 1H NMR (400 MHz, CDC13) δ ppm 4.44 (1 H, dt, J= 8.31, 3.53 Hz), 4.30 (1 H, t, J= 8.69 Hz), 4.23 (1 H, dd, J= 9.06, 3.02 Hz), 2.98-3.08 (2 H, m), 2.32-2.44 (1 H, m, J= 13.91, 7.02, 7.02, 4.03 Hz), 2.13-2.25 (2 H, m), 1.88-2.00 (2 H, m), 0.93 (3 H, d, J= 7.05 Hz), 0.88 (3 H, d, J= 6.80 Hz).

Intermediate S-1I: (2S,3R)-tert-Butyl 6,6,6-trifluoro-3-((S)-4-isopropyl-2- oxooxazolidine-3-carbonyl)-2-(3,3,3-trifluoropropyl)hexanoate, and Intermediate S-U: (2R,3R)-tert-Butyl 6,6,6-trifluoro-3-((S)-4-isopropyl-2-oxooxazolidine-3-carbonyl)-2- (3 ,3 ,3 -trifluoropropyl)hexanoate

Figure imgf000061_0001

[00191] To a cold (-78 °C), stirred solution of diisopropylamine (5.3 mL, 37.2 mmol) in THF (59 mL) under a nitrogen atmosphere was added n-BuLi (2.5M in hexane) (14.7 mL, 36.8 mmol). The mixture was then warmed to 0 °C to give a 0.5M solution of LDA. A separate vessel was charged with Intermediate S-1H (2.45 g, 9.17 mmol). The material was azeotroped twice with benzene (the RotoVap air inlet was fitted with a nitrogen inlet to completely exclude humidity), and then toluene (15.3 mL) was added. This solution was added to a flask containing dry lithium chloride (1.96 g, 46.2 mmol). To the resultant mixture, cooled to -78 °C, was added the LDA solution (21.0 mL, 10.5 mmol) and the mixture was stirred at -78 °C for 10 min, then warmed to 0 °C for 10 min., and then cooled to -78 °C. To a separate reaction vessel containing Intermediate S-1G (3.41 g, 16.07 mmol), also azeotroped twice with benzene, was added toluene (15.3 mL), cooled to -78 °C and LDA (37.0 mL, 18.5 mmol) was added. The resulting solution was stirred at -78 °C for 25 min. At this time the enolate derived from the ester was transferred via cannula into the solution of the oxazolidinone enolate and stirred at -78 °C for an additional 5 min, at which time the septum was removed and solid powdered bis(2- ethylhexanoyloxy)copper (9.02 g, 25.8 mmol) was rapidly added to the reaction vessel and the septum was replaced. The vessel was immediately removed from the cold bath and immersed into a warm water bath (40 °C) with rapid swirling and with a concomitant color change from the initial turquoise to brown. The reaction mixture was stirred for 20 min, was then poured into 5% aqueous NH4OH (360 mL) and extracted with EtOAc (2x). The combined organics were washed with brine, dried (Na2s04), filtered and concentrated under reduced pressure. The residue was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 0% to 60% solvent A/B = hexanes/EtOAc, REDISEP® Si02 120g). Concentration of the appropriate fractions provided a mixture of Intermediate S- II and Intermediate S-1J (2.87 g, 66%) as a pale yellow viscous oil. 1H NMR showed the product was a 1.6: 1 mixture of diastereomers S-1LS-1J as determined by the integration of the multiplets at 2.74 and 2.84 ppm: 1H NMR (400 MHz, CDC13) δ ppm 4.43-4.54 (2 H, m), 4.23-4.35 (5 H, m), 4.01 (1 H, ddd, J= 9.54, 6.27, 3.51 Hz), 2.84 (1 H, ddd, J = 9.41, 7.28, 3.64 Hz), 2.74 (1 H, ddd, J= 10.29, 6.27, 4.02 Hz), 2.37-2.48 (2 H, m, J = 10.38, 6.98, 6.98, 3.51, 3.51 Hz), 2.20-2.37 (3 H, m), 1.92-2.20 (8 H, m), 1.64-1.91 (5 H, m), 1.47 (18 H, s), 0.88-0.98 (12 H, m). Intermediate S-1 : (2R,3S)-3-(fert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid, and Intermediate S-IE: (2R,3R)-3-(tert-Butoxycarbonyl)- 6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid

Figure imgf000062_0001

(S-IE)

[00192] To a cool (0 °C), stirred solution of Intermediate S-1I and Intermediate S-1 J (4.54 g, 9.51 mmol) in THF (140 mL) and water (42 mL) were sequentially added hydrogen peroxide (30% in water) (10.3 g, 91 mmol) and LiOH (685.3 mg, 28.6 mmol). The mixture was stirred for 1 hr. At this time the reaction vessel was removed from the cold bath and then stirred for 1.5 hr. To the reaction mixture were added saturated NaHC03 (45 mL) and saturated Na2s03 (15 mL), and then the mixture was partially concentrated under reduced pressure. The resulting crude solution was extracted with DCM (3x). The aqueous phase was acidified to pH~l-2 with IN HC1, extracted with DCM (3x) and then EtOAc (lx). The combined organics were washed with brine, dried (Na2s04), filtered and concentrated under reduced pressure to provide a mixture of Intermediates S-1 and S-IE (3.00 g, 86%) as a colorless oil: 1H NMR (400 MHz, CDC13) δ ppm 2.76-2.84 (1 H, m, diastereomer 2), 2.64-2.76 (3 H, m), 2.04-2.35 (8 H, m), 1.88- 2.00 (4 H, m), 1.71-1.83 (4 H, m), 1.48 (9 H, s, diastereomer 1), 1.46 (9 H, s,

diastereomer 2); 1H NMR showed a 1.7: 1 mixture of S-1E:S-1F by integration of the peaks for the t-butyl groups. Intermediate S-1 : (2R,3S)-3-(fert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid, and Intermediate S-IF: (2R,3R)-3-(fert-Butoxycarbonyl)- 6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid

Figure imgf000063_0001

[00193] To a cold (-78 °C) stirred solution of diisopropylamine (1.7 mL, 11.93 mmol) in THF (19 mL) under a nitrogen atmosphere was added n-BuLi (2.5M in hexanes) (4.8 mL, 12.00 mmol). The mixture was stirred for 5 min and then warmed to 0 °C. In a separate vessel, to a cold (-78 °C) stirred solution of the mixture of Intermediates S-1 and S-1E (1.99 g, 5.43 mmol) in THF (18 mL) was added the LDA solution prepared above via cannula slowly over 25 min. The mixture was stirred for 15 min, then warmed to room temperature (placed in a 24 °C water bath) for 15 min, and then again cooled to -78 °C for 15 min. To the reaction mixture was added Et2AlCl (1M in hexane) (11.4 mL, 11.40 mmol) via syringe. The mixture was stirred for 10 min, warmed to room

temperature for 15 min and then cooled back to -78 °C for 15 min. Methanol (25 mL) was rapidly added, swirled vigorously while warming to room temperature, and then concentrated to ~l/4 the original volume. The mixture was dissolved in EtOAc and washed with IN HC1 (50 mL) and ice (75 g). The aqueous phase was separated and extracted with EtOAc (2x). The combined organics were washed with a mixture of KF (2.85g in 75 mL water) and IN HC1 (13 mL) [resulting solution pH 3-4], then with brine, dried (Na2s04), filtered and concentrated under reduced pressure to give a 9: 1 (S-LS-1E) enriched diastereomeric mixture (as determined by 1H NMR) of Intermediate S-1 and Intermediate S-1E (2.13 g, >99%) as a pale yellow viscous oil: 1H NMR (400 MHz, CDC13) δ ppm 2.64-2.76 (2 H, m), 2.04-2.35 (4 H, m), 1.88-2.00 (2 H, m), 1.71-1.83 (2 H, m), 1.48 (9 H, s).

Intermediate S-2: (2R,3S)-3-(fert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3- fluoropropyl)hexanoic acid

Figure imgf000064_0001

Intermediate S-2: (2R,3S)-3-(tert-Butoxycarbonyl)-7,7,7-trifluoro-2-(3,3,3- trifluoropropyl)heptanoic acid, and Intermediate S-2A: (2R,3R)-3-(tert-Butoxycarbonyl)- 7,7,7-trifluoro-2-(3,3,3-trifluoropropyl)heptanoic acid

Figure imgf000064_0002

(S-2A)

[00194] To a cold (-78 °C), stirred solution of Intermediate S-1D (1.72 g, 6.36 mmol) in THF (30 mL) was slowly added LDA (7.32 mL, 14.6 mmol) over 7 min. After stirring for 1 h, 4,4,4-trifluorobutyltrifluoromethanesulfonate (2.11 g, 8.11 mmol) was added to the reaction mixture over 2 min. After 15 min, the reaction mixture was warmed to -25 °C (ice/MeOH/dry ice) for lh, and then cooled to -78 °C. After 80 min, the reaction was quenched with a saturated aqueous NH4C1 solution (10 mL). The reaction mixture was further diluted with brine and the solution was adjusted to pH 3 with IN HC1. The aqueous layer was extracted with ether. The combined organics were washed with brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure to provide a mixture of Intermediates S-2 and S-2A (2.29 g, 95%) as a colorless oil. 1H NMR (400MHz, chloroform-d) δ 2.83-2.75 (m, 1H), 2.64 (ddd, J = 9.9, 6.7, 3.6 Hz, 1H), 2.32-2.03 (m, 5H), 1.98-1.70 (m, 3H), 1.69-1.52 (m, 3H), 1.50-1.42 (m, 9H). 1H NMR showed a 1 :4.5 mixture (S-2:S-2A) of diastereomers by integration of the peaks for the t- Bu groups.

Intermediate S-2: (2R,3S)-3-(fert-Butoxycarbonyl)-7,7,7-trifluoro-2-(3,3,3- trifluoropropyl)heptanoic acid, and Intermediate S-2A: (2R,3R)-3-(tert-Butoxycarbonyl)- 7,7,7-trifluoro-2-(3,3,3-trifluoropropyl)heptanoic acid

Figure imgf000065_0001

[00195] A mixture of Intermediate S-2 and Intermediate S-2A (2.29 g, 6.02 mmol) was dissolved in THF (38 mL) to give a colorless solution which was cooled to -78 °C. Then, LDA (7.23 mL, 14.5 mmol) (2.0M in heptane/THF/ethylbenzene) was slowly added to the reaction mixture over 3 min. After stirring for 15 min, the reaction mixture was placed in a room temperature water bath. After 15 min the reaction mixture was placed back in a -78 °C bath and then diethylaluminum chloride (14.5 mL, 14.5 mmol) (1M in hexane) was added slowly over 5 min. The reaction mixture was stirred at -78 °C. After 15 min, the reaction mixture was placed in a room temperature water bath for 10 min, and then cooled back to -78 °C. After 15 min, the reaction was quenched with MeOH (30.0 mL, 741 mmol), removed from the -78 °C bath and concentrated. To the reaction mixture was added ice and HC1 (60.8 mL, 60.8 mmol) and the resulting mixture was extracted with EtOAc (2x 200 mL). The organic layer was washed with potassium fluoride (3.50g, 60.3 mmol) in 55 mL H20 and 17.0 mL of IN HC1. The organics were dried over anhydrous magnesium sulfate and concentrated under reduced pressure to provide an enriched mixture of Intermediate S-2 and Intermediate S-2A (2.25g, 98% yield) as a light yellow oil. 1H NMR (400MHz, chloroform-d) δ 2.83-2.75 (m, 1H), 2.64 (ddd, J= 9.9, 6.7, 3.6 Hz, 1H), 2.32-2.03 (m, 5H), 1.98-1.70 (m, 3H), 1.69-1.52 (m, 3H), 1.50-1.42 (m, 9H). 1H NMR showed a 9: 1 ratio in favor of the desired diastereomer Intermediate S-2.

Intermediate S-2B: (2R,3S)-1 -Benzyl 4-tert-butyl 2,3-bis(4,4,4-trifluorobutyl)succinate

Figure imgf000065_0002

[00196] To a stirred 9: 1 mixture of Intermediate S-2 and Intermediate S-2A (2.24 g, 5.89 mmoL) and potassium carbonate (1.60 g, 11.58 mmoL) in DMF (30 mL) was added benzyl bromide (1.20 mL, 10.1 mmoL)). The reaction mixture was stirred at room temperature for 19 h. The reaction mixture was diluted with ethyl acetate (400 mL) and washed with 10% LiCl solution (3 x 100 mL), brine (50 mL), and then dried over anhydrous magnesium sulfate, filtered and concentrated to dryness under vacuum. The residue was purified by flash chromatography (Teledyne ISCO CombiFlash 0%> to 100% solvent A/B = hexane/EtOAc, REDISEP® Si02 220 g, detecting at 254 nm, and monitoring at 220 nm). Concentration of the appropriate fractions provided Intermediate S-2B (1.59 g, 57.5%). HPLC: RT = 3.863 min (CHROMOLITH® SpeedROD column 4.6 x 50 mm, 10-90% aqueous methanol over 4 minutes containing 0.1% TFA, 4 mL/min, monitoring at 220 nm), 1H NMR (400MHz, chloroform-d) δ 7.40-7.34 (m, 5H), 5.17 (d, J= 1.8 Hz, 2H), 2.73-2.64 (m, 1H), 2.55 (td, J= 10.0, 3.9 Hz, 1H), 2.16-1.82 (m, 5H), 1.79-1.57 (m, 3H), 1.53-1.49 (m, 1H), 1.45 (s, 9H), 1.37-1.24 (m, 1H).

Intermediate S-2: (2R,3S)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(4,4,4- trifluorobutyl)hexanoic acid

Figure imgf000066_0001

[00197] To a stirred solution of Intermediate S-2B (1.59 g, 3.37 mmoL) in MeOH (10 mL) and EtOAc (10 mL) under nitrogen was added 10%> Pd/C (510 mg). The atmosphere was replaced with hydrogen and the reaction mixture was stirred at room temperature for 2.5 h. The palladium catalyst was filtered off through a 4 μΜ polycarbonate film and rinsed with MeOH. The filtrate was concentrated under reduced pressure to give intermediate S-2 (1.28 g, 99%). 1H NMR (400MHz, chloroform-d) δ 2.76-2.67 (m, 1H), 2.65-2.56 (m, 1H), 2.33-2.21 (m, 1H), 2.17-2.08 (m, 3H), 1.93 (dtd, J= 14.5, 9.9, 5.2 Hz, 1H), 1.84-1.74 (m, 2H), 1.70-1.52 (m, 3H), 1.48 (s, 9H).

Intermediate A- 1 : (2-Amino-3 -methylphenyl)(3 -fluorophenyl)methanone

Figure imgf000067_0001

Intermediate A-1 A: 2-Amino- -methoxy-N,3-dimethylbenzamide

Figure imgf000067_0002

[00198] In a 1 L round-bottomed flask was added 2-amino-3-methylbenzoic acid (11.2 g, 74.1 mmol) and Ν,Ο-dimethylhydroxylamine hydrochloride (14.45 g, 148 mmol) in DCM (500 mL) to give a pale brown suspension. The reaction mixture was treated with Et3N (35 mL), HOBT (11.35 g, 74.1 mmol) and EDC (14.20 g, 74.1 mmol) and then stirred at room temperature for 24 hours. The mixture was then washed with 10% LiCl, and then acidified with IN HCl. The organic layer was washed successively with 10%> LiCl and aq NaHC03. The organic layer was decolorized with charcoal, filtered, and the filtrate was dried over MgSC^. The mixture was filtered and concentrated to give 13.22 g (92% yield) of Intermediate A-1A. MS(ES): m/z = 195.1 [M+H+]; HPLC: RT = 1.118 min. (H20/MeOH with TFA, CHROMOLITH® ODS S5 4.6 x 50 mm, gradient = 4 min, wavelength = 220 nm); 1H NMR (500MHz, chloroform-d) δ 7.22 (dd, J= 7.8, 0.8 Hz, 1H), 7.12-7.06 (m, 1H), 6.63 (t, J= 7.5 Hz, 1H), 4.63 (br. s., 2H), 3.61 (s, 3H), 3.34 (s, 3H), 2.17 (s, 3H).

Intermediate A- 1 : (2-Amino-3 -methylphenyl)(3 -fluorophenyl)methanone

Figure imgf000067_0003

[00199] In a 500 mL round-bottomed flask, a solution of l-fluoro-3-iodobenzene (13.61 mL, 116 mmol) in THF (120 mL) was cooled in a -78 °C bath. A solution of n- BuLi, (2.5M in hexane, 46.3 mL, 116 mmol) was added dropwise over 10 minutes. The solution was stirred at -78 °C for 30 minutes and then treated with a solution of

Intermediate A-1 A (6.43 g, 33.1 mmol) in THF (30 mL). After 1.5 hours, the reaction mixture was added to a mixture of ice and IN HCl (149 mL, 149 mmol) and the reaction flask was rinsed with THF (5 ml) and combined with the aqueous mixture. The resulting mixture was diluted with 10% aq LiCl and the pH was adjusted to 4 with IN NaOH. The mixture was then extracted with Et20, washed with brine, dried over MgS04, filtered and concentrated. The resulting residue was purified by silica gel chromatography (220g ISCO) eluting with a gradient from 10% EtOAc/hexane to 30% EtOAc/hexane to afford Intermediate A-l (7.11 g, 94% yield) as an oil. MS(ES): m/z = 230.1 [M+H+]; HPLC: RT = 2.820 min Purity = 99%. (H20/MeOH with TFA, CHROMOLITH® ODS S5 4.6 x 50 mm, gradient = 4 min, wavelength = 220 nm).

Intermediate B-1 : (S)-3-Amino-5-(3-fluorophenyl)-9-methyl-lH-benzo[e][l,4]diazepin- 2(3H)-one

Figure imgf000085_0001

Intermediate B-1 A: (S)-Benzyl (5-(3-fluorophenyl)-9-methyl-2-oxo-2,3-dihydro benzo[e] [ 1 ,4]diazepin-3-yl)carbamate

Figure imgf000085_0002

(B-1A)

[00225] In a 1 L round-bottomed flask, a solution of 2-(lH-benzo[d][l,2,3]triazol-l- yl)-2-((phenoxycarbonyl)amino)acetic acid (J. Org. Chem., 55:2206-2214 (1990)) (19.37 g, 62.0 mmol) in THF (135 mL) was cooled in an ice/water bath and treated with oxalyl chloride (5.43 mL, 62.0 mmol) and 4 drops of DMF. The reaction mixture was stirred for 4 hours. Next, a solution of Intermediate A- 1 (7.11 g, 31.0 mmol) in THF (35 mL) was added and the resulting solution was removed from the ice/water bath and stirred at room temperature for 1.5 hours. The mixture was then treated with a solution of ammonia, (7M in MeOH) (19.94 mL, 140 mmol). After 15 mins, another portion of ammonia, (7M in MeOH) (19.94 mL, 140 mmol) was added and the resulting mixture was sealed under N2 and stirred overnight at room temperature. The reaction mixture was then concentrated to ~l/2 volume and then diluted with AcOH (63 mL) and stir at room temperature for 4 hours. The reaction mixture was then concentrated, and the residue was diluted with 500 mL water to give a precipitate. Hexane and Et20 were added and the mixture was stirred at room temperature for 1 hour to form an orange solid. Et20 was removed under a stream of nitrogen and the aqueous layer was decanted. The residue was triturated with 40 mL of iPrOH and stirred at room temperature to give a white precipitate. The solid was filtered and washed with iPrOH, then dried on a filter under a stream of nitrogen to give racemic Intermediate B-1A (5.4 g, 41.7%yield).

[00226] Racemic Intermediate B-1A (5.9 g, 14.3 mmol) was resolved using the Chiral SFC conditions described below. The desired stereoisomer was collected as the second peak in the elution order: Instrument: Berger SFC MGIII, Column: CHIRALPAK® IC 25 x 3 cm, 5 cm; column temp: 45 °C; Mobile Phase: C02/MeOH (45/55); Flow rate: 160 mL/min; Detection at 220 nm.

[00227] After evaporation of the solvent, Intermediate B-1A (2.73 g, 46% yield) was obtained as a white solid. HPLC: RT = 3.075 min. (H20/MeOH with TFA,

CHROMOLITH® ODS S5 4.6 x 50 mm, gradient = 4 min, wavelength = 220 nm).

Chiral HPLC RT: 8.661 min (AD, 60% (EtOH/MeOH)/heptane) > 99%ee. MS(ES): m/z = 418.3 [M+H+];1H NMR (500MHz, DMSO-d6) δ 10.21 (s, 1H), 8.38 (d, J= 8.3 Hz, 1H), 7.57-7.47 (m, 2H), 7.41-7.29 (m, 8H), 7.25-7.17 (m, 2H), 5.10-5.04 (m, 3H), 2.42 (s, 3H).

Intermediate B-l : (S)-3-Amino-5-(3-fluorophenyl)-9-methyl-lH-benzo[e][l,4]diazepin- 2(3H)-one.

[00228] In a 100 mL round-bottomed flask, a solution of Intermediate B-1A (2.73 g, 6.54 mmol) in acetic acid (12 mL) was treated with HBr, 33% in HOAc (10.76 mL, 65.4 mmol) and the mixture was stirred at room temperature for 1 hour. The solution was diluted with Et20 to give a yellow precipitate. The yellow solid was filtered and rinsed with Et20 under nitrogen. The solid was transferred to 100 mL round bottom flask and water was added (white precipitate formed). The slurry was slowly made basic with saturated NaHC03. The resulting tacky precipitate was extracted with EtOAc. The organic layer was washed with water, dried over MgS04, and then filtered and

concentrated to dryness to give Intermediate B-l (1.68 g, 91% yield) as a white foam solid. MS(ES): m/z = 284.2 [M+H+]; HPLC: RT = 1.72 min (H20/MeOH with TFA, CHROMOLITH® ODS S5 4.6 x 50 mm, gradient = 4 min, wavelength = 220 nm). 1H NMR (400MHz, DMSO-d6) δ 10.01 (br. s., 1H), 7.56-7.44 (m, 2H), 7.41-7.26 (m, 3H), 7.22-7.11 (m, 2H), 4.24 (s, 1H), 2.55 (br. s., 2H), 2.41 (s, 3H). [00229] The compounds listed below in Table 6 (Intermediates B-2 to B-3) were prepared according to the general synthetic procedure described for Intermediate B-l , using the starting materials Intermediate A- 10 and Intermediate A-4, respectively.

 

Example 1

(2R,3S)-N-((3S)-5-(3-Fluorophenyl)-9-methyl-2-oxo-2,3-dihydro-lH-l,4-benzodiazepin- 3-yl)-2, -bis(3,3,3-trifluoropropyl)succinamide

Figure imgf000098_0001

Intermediate 1A: (2S,3R)-tert-Butyl 6,6,6-trifluoro-3-(((S)-5-(3-fluorophenyl)-9-methyl- 2-0X0-2, 3-dihydro-lH-benzo[e][l,4]diazepin-3-yl)carbamoyl)-2-(3,3 ,3- trifluoropropyl)hexanoat

Figure imgf000098_0002

[00240] In a 100 mL round-bottomed flask, a solution of Intermediate B-l (1683 mg, 5.94 mmol), Et3N (1.656 mL, 11.88 mmol), and Intermediate S-l in DMF (20 mL) was treated with o-benzotriazol-l-yl-A .A .N’.N’-tetramethyluronium tetrafluoroborate (3815 mg, 11.88 mmol) and stirred at room temperature for 1 hour. The reaction mixture was diluted with water and saturated aqueous NaHC03. An off white precipitate formed and was filtered and washed with water. The resulting solid was dried on the filter under a stream of nitrogen to give Intermediate 1A (3.7 g, 99% yield). MS(ES): m/z =

632.4[M+H+]; HPLC: RT = 3.635 min Purity = 98%. (H20/MeOH with TFA,

CHROMOLITH® ODS S5 4.6 x 50 mm, gradient = 4 min, wavelength = 220 nm). 1H NMR (400MHz, methanol-d4) δ 7.53 (t, J = 4.5 Hz, 1H), 7.46-7.30 (m, 3H), 7.28-7.23 (m, 1H), 7.23-7.18 (m, 2H), 5.37 (s, 1H), 2.88 (td, J = 10.4, 3.4 Hz, 1H), 2.60 (td, J =

10.2, 4.1 Hz, 1H), 2.54-2.40 (m, 1H), 2.47 (s, 3 H), 2.33-2.12 (m, 3H), 1.98-1.69 (m, 4H), 1.51 (s, 9H). Intermediate IB: (2S,3R)-6,6,6-Trifluoro-3-(((S)-5-(3-fluorophenyl)-9-methyl-2-oxo-

2,3-dihydro-lH-benzo[e][l,4]diazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid

Figure imgf000099_0001

[00241] In a 250 mL round-bottomed flask, a solution of Intermediate 1A (3.7 g, 5.86 mmol) in DCM (25 mL) was treated with TFA (25 mL) and the resulting pale orange solution was stirred at room temperature for 1.5 hours. The reaction mixture was then concentrated to give Intermediate IB. HPLC: RT = 3.12 min (H20/MeOH with TFA, CHROMOLITH® ODS S5 4.6 x 50 mm, gradient = 4 min, wavelength = 220 nm).

MS(ES): m/z = 576.3 (M+H)+. 1H NMR (400MHz, methanol-d4) δ 7.54 (t, J= 4.5 Hz, 1H), 7.49-7.29 (m, 3H), 7.28-7.15 (m, 3H), 5.38 (br. s., 1H), 2.89 (td, J= 10.3, 3.7 Hz, 1H), 2.67 (td, J= 9.9, 4.2 Hz, 1H), 2.56-2.38 (m, 1H), 2.48 (s, 3 H), 2.34-2.13 (m, 3H), 2.00-1.71 (m, 4H).

Example 1 :

[00242] In a 250 mL round-bottomed flask, a solution of Intermediate IB (4.04 g, 5.86 mmol) in THF (50 mL) was treated with ammonia (2M in iPrOH) (26.4 mL, 52.7 mmol), followed by HOBT (1.795 g, 11.72 mmol) and EDC (2.246 g, 11.72 mmol). The resulting white suspension was stirred at room temperature overnight. The reaction mixture was diluted with water and saturated aqueous NaHC03. The resulting solid was filtered, rinsed with water and then dried on the filter under a stream of nitrogen. The crude product was suspended in 20 mL of iPrOH and stirred at room temperature for 20 min and then filtered and washed with iPrOH and dried under vacuum to give 2.83 g of solid. The solid was dissolved in re fluxing EtOH(100 mL) and slowly treated with 200 mg activated charcoal added in small portions. The hot mixture was filtered through CELITE® and rinsed with hot EtOH. The filtrate was reduced to half volume, allowed to cool and the white precipitate formed was filtered and rinsed with EtOH to give 2.57 g of white solid. A second recrystallization from EtOH (70 mL) afforded Example 1 (2.39 g, 70% yield) as a white solid. HPLC: RT = 10.859 min (H20/CH3CN with TFA, Sunfire C18 3.5μπι, 3.0x150mm, gradient = 15 min, wavelength = 220 and 254 nm); MS(ES): m/z = 575.3 [M+H+]; 1H NMR (400MHz, methanol-d4) δ 7.57-7.50 (m, 1H), 7.47-7.30 (m, 3H), 7.29-7.15 (m, 3H), 5.38 (s, 1H), 2.85-2.75 (m, 1H), 2.59 (td, J= 10.5, 4.0 Hz, 1H), 2.53-2.41 (m, 4H), 2.31-2.10 (m, 3H), 1.96-1.70 (m, 4H).

 

SEE

WO2012129353A1 *Mar 22, 2012Sep 27, 2012Bristol-Myers Squibb CompanyBis(fluoroalkyl)-1,4-benzodiazepinone compounds

 

PAPER RELATED

Structure–activity relationships in a series of (2-oxo-1,4-benzodiazepin-3-yl)-succinamides identified highly potent inhibitors of γ-secretase mediated signaling of Notch1/2/3/4 receptors. On the basis of its robust in vivo efficacy at tolerated doses in Notch driven leukemia and solid tumor xenograft models, 12 (BMS-906024) was selected as a candidate for clinical evaluation.

Discovery of Clinical Candidate BMS-906024: A Potent Pan-Notch Inhibitor for the Treatment of Leukemia and Solid Tumors

Bristol-Myers Squibb Research and Development, Princeton, New Jersey 08543, United States
Bristol-Myers Squibb Research and Development, 5 Research Parkway, Wallingford, Connecticut 06492, United States
§ Department of Chemistry, The Scripps Research Institute, 10550 North Torrey Pines Road, La Jolla, California 92037,United States
ACS Med. Chem. Lett., 2015, 6 (5), pp 523–527
*Phone: 609-252-5091. E-mail: ashvinikumar.gavai@bms.com.
Image result for BMS 906024 synthesis

Patent

http://www.google.co.in/patents/WO2012129353A1?cl=en

 

PATENT RELATED

US-20160060232-A1

https://patentscope.wipo.int/search/en/detail.jsf?docId=US159930181&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCTDescription

 

PATENTS RELATED

US-20150284342-A1

US-20140357605-A1

US-20140100365-A1

Clip RELATED

For some disease targets, an indirect approach may be best. Or so Ashvinikumar V. Gavai and his colleagues atBristol-Myers Squibbfound in their quest toward a potential cancer drug. Gavai unveiled BMS-906024, which is an experimental—and slightly roundabout—treatment for a number of cancers, including breast, lung, and colon cancers, and leukemia.

Cancers have a tendency to relapse or to become resistant to treatments that once worked. Research at BMS and elsewhere had suggested that a family of proteins called Notch is implicated in that resistance and in cancer progression more generally. Gavai, director of oncology chemistry at BMS in Princeton, N.J., and his team set out to block Notch family signaling.

Notch family members lack enzymatic activity, so blocking them directly is difficult. Instead, BMS developed inhibitors of an enzyme that is essential for activating Notch signaling—γ-secretase.

09116-cover-bms906024

Company: Bristol-Myers Squibb

Target: pan-Notch

Disease: breast, lung, colon cancer; leukemia

Interfering with Notch, even in this indirect way, can have detrimental effects on the gastrointestinal tract. Only two of the four Notch family members are linked to that side effect, Gavai says. But he and his team think their drug will be most effective if it acts on all four family members roughly equally—a so-called pan-Notch inhibitor. By selecting a molecule that’s well tolerated in animals and carefully scheduling doses of the drug in humans, it could be possible to minimize side effects, he says.

The BMS team relied on Notch signaling assays in leukemia and breast cancer cell lines to find leads. They soon learned that for their molecules to work, three chiral centers had to be in the S,R,Sconfiguration. After that, they strove to make the molecules last in the bloodstream. They removed an isobutyl group and tweaked some other parts of their candidate’s succinamide side chain. It was tough to retain both a long half-life and activity against Notch, Gavai told C&EN. “You’d optimize one and lose the other.”

His team threaded the needle with BMS-906024. Their studies with mice suggest that a dose of 4–6 mg once a week could be effective in people. That’s lower than doses being tested for other Notch-targeted agents, according to the website clinicaltrials.gov. The mouse studies also back the idea that Notch is involved in cancer drug resistance and suggest that Notch could be a target for taking on cancer stem cells, which are notoriously resistant to chemotherapy.

BMS-906024 is in Phase I clinical trials, both alone and in combination with other agents. Patients with colon, lung, breast, and other cancers are receiving intravenous doses of the compound to determine its safety and optimum dose ranges.

09116-cover-BMScxd

(From left, front row) Gavai, Weifeng Shan, (second row) Aaron Balog, Patrice Gill, Gregory Vite, (third row) Francis Lee, Claude Quesnelle, (rear row) Wen-Ching Han, Richard Westhouse.

Credit: Catherine Stroud Photography

http://cen.acs.org/articles/91/i16/BMS-906024-Notch-Signaling-Inhibitor.html

Image result for BMS 906024 synthesis

 

PAPER RELATED

Abstract Image

An enantioselective synthesis of (S)-7-amino-5H,7H-dibenzo[b,d]azepin-6-one (S1) is described. The key step in the sequence involved crystallization-induced dynamic resolution (CIDR) of compound 7 using Boc-d-phenylalanine as a chiral resolving agent and 3,5-dichlorosalicylaldehyde as a racemization catalyst to afford S1 in 81% overall yield with 98.5% enantiomeric excess.

Crystallization-Induced Dynamic Resolution toward the Synthesis of (S)-7-Amino-5H,7H-dibenzo[b,d]-azepin-6-one: An Important Scaffold for γ-Secretase Inhibitors

Department of Discovery Synthesis, Biocon Bristol-Myers Squibb Research Centre, Biocon Park, Bommasandra IV Phase, Jigani Link Road, Bengaluru 560099, India
Bristol-Myers Squibb Company, P.O Box 4000, Princeton, New Jersey 08543-4000, United States
Org. Process Res. Dev., Article ASAP
Cited Patent Filing date Publication date Applicant Title
WO2000007995A1 * Aug 7, 1999 Feb 17, 2000 Du Pont Pharmaceuticals Company SUCCINOYLAMINO LACTAMS AS INHIBITORS OF Aβ PROTEIN PRODUCTION
WO2000038618A2 * Dec 23, 1999 Jul 6, 2000 Du Pont Pharmaceuticals Company SUCCINOYLAMINO BENZODIAZEPINES AS INHIBITORS OF Aβ PROTEIN PRODUCTION
WO2001060826A2 * Feb 16, 2001 Aug 23, 2001 Bristol-Myers Squibb Pharma Company SUCCINOYLAMINO CARBOCYCLES AND HETEROCYCLES AS INHIBITORS OF Aβ PROTEIN PRODUCTION
US6737038 * May 17, 2000 May 18, 2004 Bristol-Myers Squibb Company Use of small molecule radioligands to discover inhibitors of amyloid-beta peptide production and for diagnostic imaging
US7053084 Feb 17, 2000 May 30, 2006 Bristol-Myers Squibb Company Succinoylamino benzodiazepines as inhibitors of Aβ protein production
US7456172 Jan 13, 2006 Nov 25, 2008 Bristol-Myers Squibb Pharma Company Succinoylamino benzodiazepines as inhibitors of Aβ protein production
US20030134841 * Nov 1, 2002 Jul 17, 2003 Olson Richard E. Succinoylamino lactams as inhibitors of A-beta protein production
US20120245151 * Mar 22, 2012 Sep 27, 2012 Bristol-Myers Squibb Company Bisfluoroalkyl-1,4-benzodiazepinone compounds

 

//////////BMS-986115, BMS 986115, 3,5-dichlorosalicylaldehyde, Alzheimer’s disease, Boc-D-phenylalanine, CIDR;dibenzoazepenone DKR; Notch inhibitorsNotch inhibitor, SAR T-acute lymphoblastic leukemia, triple-negative breast cancer, γ-secretase inhibitor, PHASE 1, BMS, Bristol-Myers Squibb,  Ashvinikumar Gavai1584647-27-7, UNII: LSK1L593UU

Cc1cccc2c1NC(=O)[C@H](N=C2c3cccc(c3)F)NC(=O)[C@H](CCC(F)(F)F)[C@H](CCC(F)(F)F)C(=O)N

BMS 906024


BMS-906024.pngBMS-906024.svg

 

Figure imgf000065_0001

BMS 906024

cas 1401066-79-2

  • MF C26H26F6N4O3
  • MW 556.500

(2R,3S)-N-[(3S)-1-Methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl]-2,3-bis(3,3,3-trifluoropropyl)succinamide

Butanediamide, N1-((3S)-2,3-dihydro-1-methyl-2-oxo-5-phenyl-1H-1,4-benzodiazepin-3-yl)-2,3-bis(3,3,3-trifluorophenyl)-, (2R,3S)-

(2R,35)-N-((35)-l-Methyl-2-oxo-5-phenyl-2,3-dihydro-lH-l,4-benzodiazepin-3-yl)-3- (2,2,2-trifluoroethyl)-2-(3,3,3-trifluoropropyl)succinamide

Claude Quesnelle, Soong-Hoon Kim, Francis Lee, Ashvinikumar Gavai
Applicant Bristol-Myers Squibb Company

 

str2

Ashvinikumar Gavai

 

 

Claude Quesnelle

Claude Quesnelle
Senior Research Investigator/Chemist at Bristol-Myers Squibb

str2

RICHARD LEE

BMS-906024 is a novel, potent Notch receptor inhibitor . Cancers have a tendency to relapse or to become resistant to treatments that once worked. A family of proteins called Notch is implicated in that resistance and in cancer progression more generally. BMS-906024 is in Phase I clinical trials, both alone and in combination with other agents. Patients with colon, lung, breast, and other cancers are receiving intravenous doses of the compound to determine its safety and optimum dose ranges.

New Phase I drug structure by Bristol-Myers Squibb disclosed at the spring 2013 American Chemical Society meeting in New Orleans to treat breast, lung, and colon cancers and leukemia.[1] The drug works as an pan-Notch inhibitor. The structure is one of a set patented in 2012,[2] and it currently being studied in clinical trials.[3][4]

useful for the treatment of conditions related to the Notch pathway, such as cancer and other proliferative diseases.

Notch signaling has been implicated in a variety of cellular processes, such as cell fate specification, differentiation, proliferation, apoptosis, and angiogenesis. (Bray, Nature Reviews Molecular Cell Biology, 7:678-689 (2006); Fortini, Developmental Cell 16:633-647 (2009)). The Notch proteins are single-pass heterodimeric transmembrane molecules. The Notch family includes 4 receptors, NOTCH 1-4, which become activated upon binding to ligands from the DSL family (Delta-like 1, 3, 4 and Jagged 1 and 2).

The activation and maturation of NOTCH requires a series of processing steps, including a proteolytic cleavage step mediated by gamma secretase, a multiprotein complex containing Presenilin 1 or Presenilin 2, nicastrin, APH1, and PEN2. Once NOTCH is cleaved, NOTCH intracellular domain (NICD) is released from the membrane. The released NICD translocates to the nucleus, where it functions as a transcriptional activator in concert with CSL family members (RBPSUH, “suppressor of hairless”, and LAG1). NOTCH target genes include HES family members, such as HES- 1. HES- 1 functions as transcriptional repressors of genes such as HERP 1 (also known as HEY2), HERP2 (also known as HEY1), and HATH1 (also known as ATOH1).

The aberrant activation of the Notch pathway contributes to tumorigenesis. Activation of Notch signaling has been implicated in the pathogenesis of various solid tumors including ovarian, pancreatic, as well as breast cancer and hematologic tumors such as leukemias, lymphomas, and multiple myeloma. The role of Notch inhibition and its utility in the treatment of various solid and hematological tumors are described in Miele, L. et al, Current Cancer Drug Targets, 6:313-323 (2006); Bolos, V. et al, Endocrine Reviews, 28:339-363 (2007); Shih, I.-M. et al, Cancer Research, 67: 1879- 1882 (2007); Yamaguchi, N. et al., Cancer Research, 68: 1881-1888 (2008); Miele, L., Expert Review Anti-cancer Therapy, 8: 1 197-1201 (2008); Purow, B., Current Pharmaceutical Biotechnology, 10: 154-160 (2009); Nefedova, Y. et al, Drug Resistance Updates, 1 1 :210-218 (2008); Dufraine, J. et al, Oncogene, 27:5132-5137 (2008); and Jun, H.T. et al, Drug Development Research, 69:319-328 (2008).

There remains a need for compounds that are useful as Notch inhibitors and that have sufficient metabolic stability to provide efficacious levels of drug exposure. Further, there remains a need for compounds useful as Notch inhibitors that can be orally or intravenously administered to a patient.

U.S. Patent No. 7,053,084 Bl discloses succinoylamino benzodiazepine compounds useful for treating neurological disorders such as Alzheimer’s Disease. The reference discloses that these succinoylamino benzodiazepine compounds inhibit gamma secretase activity and the processing of amyloid precursor protein linked to the formation of neurological deposits of amyloid protein. The reference does not disclose the use of these compounds in the treatment of proliferative diseases such as cancer.

Applicants have found potent compounds that have activity as Notch inhibitors and have sufficient metabolic stability to provide efficacious levels of drug exposure upon intravenous or oral administration. These compounds are provided to be useful as pharmaceuticals with desirable stability, bioavailability, therapeutic index, and toxicity values that are important to their drugability.

Image result for BMS 906024Image result for BMS 906024

Image result for BMS 906024 synthesis

PAPER

Abstract Image

Structure–activity relationships in a series of (2-oxo-1,4-benzodiazepin-3-yl)-succinamides identified highly potent inhibitors of γ-secretase mediated signaling of Notch1/2/3/4 receptors. On the basis of its robust in vivo efficacy at tolerated doses in Notch driven leukemia and solid tumor xenograft models, 12 (BMS-906024) was selected as a candidate for clinical evaluation.

Discovery of Clinical Candidate BMS-906024: A Potent Pan-Notch Inhibitor for the Treatment of Leukemia and Solid Tumors

Bristol-Myers Squibb Research and Development, Princeton, New Jersey 08543, United States
Bristol-Myers Squibb Research and Development, 5 Research Parkway, Wallingford, Connecticut 06492, United States
§ Department of Chemistry, The Scripps Research Institute, 10550 North Torrey Pines Road, La Jolla, California 92037,United States
ACS Med. Chem. Lett., 2015, 6 (5), pp 523–527
*Phone: 609-252-5091. E-mail: ashvinikumar.gavai@bms.com.
(2R,3S)-N-((3S)-1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4- benzodiazepin-3-yl)-2,3-bis(3,3,3-trifluoropropyl)succinamide
colorless solid: HPLC: RT = 9.60 min (HPLC Method D). Chiral LC/Analytical SFC conditions: Column: LuxCellulose-2 (0.46 x 25cm), Mobile phase: 10% methanol in CO2, Flow rate: 3 mL/min, wavelength: 220 nm; Temp.: 35C. RT = 9.21 min, Purity = 99.95%.
MS (ES): m/z = 557 [M+H]+ ;
1H NMR (400 MHz, DMSO-d6)  9.54 (1H, d, J = 7.28 Hz), 7.71 – 7.80 (1H, m), 7.68 (2H, d, J = 8.78 Hz), 7.50 – 7.62 (3H, m), 7.45 (2H, t, J = 7.28 Hz), 7.29 – 7.40 (2H, m), 7.15 (1H, s), 5.30 (1H, d, J = 7.28 Hz), 3.39 (3H, s), 2.74 – 2.86 (1H, m), 2.02 -2.32 (3H, m), 1.45 – 1.79 (4H, m);
[]D = -107.0° (5.73 mg/mL, DMSO).
Elemental analysis: Theoretical: C: 54.11%; H: 4.70%; N: 10.06%; Actual: C: 54.06%; H: 4.90%; N: 10.08%.
Karl Fisher Moisture: 0.48.
HPLC Method D: Sunfire C18 3.5um, 3.0x150mm column, solvent A: 5% acetonitrile – 95% water – 0.05% TFA, solvent B: 95% acetonitrile – 5% water – 0.05% TFA, flow=0.5 mL/min, gradient from 10%B to 100%B over 15min, 254 nm detector.
Image result for BMS 906024 synthesis

Patent

http://www.google.co.in/patents/WO2012129353A1?cl=en

Example 1

(2R,35)-N-((35′)-l-Methyl-2-oxo-5-phenyl-2,3-dihydro-lH-l,4-benzodiazepin-3-yl)-2,3- b -trifluoropropy l)succinamide

Figure imgf000065_0001

Preparation 1A: tert-Butyl 5, -trifluoropentanoate

Figure imgf000065_0002

[00219] To a stirred solution of 5,5,5-trifluoropentanoic acid (5 g, 32.0 mmol) in THF (30 mL) and hexane (30 mL) at 0 °C, was added tert-butyl 2,2,2-trichloroacetimidate (11.46 mL, 64.1 mmol). The mixture was stirred for 15 min at 0 °C. Boron trifluoride etherate (0.406 mL, 3.20 mmol) was added and the reaction mixture was allowed to warm to room temperature overnight. To the clear reaction mixture was added solid aHC03 (5 g) and stirred for 30 min. The mixture was filtered through MgS04 and washed with hexanes (200 mL). The solution was allowed to rest for 45 min, and the resulting solid material was removed by filtering on the same MgS04 filter again, washed with hexanes (100 mL) and concentrated under reduced pressure without heat. The volume was reduced to about 30 mL, filtered through a clean fritted funnel, washed with hexane (5 mL), and then concentrated under reduced pressure without heat. The resulting neat oil was filtered through a 0.45μηι nylon membrane filter disk to provide tert-butyl 5,5,5- trifluoropentanoate (6.6 g, 31.4 mmol 98% yield) as a colorless oil: XH NMR (400 MHz, CDC13) δ ppm 1.38 (s, 9 H) 1.74-1.83 (m, 2 H) 2.00-2.13 (m, 2 H) 2.24 (t, J=7.28 Hz, 2 H).

Preparation IB: (45)-4-(Propan-2- l)-3-(5,5,5-trifluoropentanoyl)-l,3-oxazolidin-2-one

Figure imgf000066_0001

[00220] To a stirred solution of 5,5,5-trifluoropentanoic acid (5.04 g, 32.3 mmol) in DCM (50 mL) and DMF (3 drops) was added oxalyl chloride (3.4 mL, 38.8 mmol) dropwise over 5 min and the solution was stirred until all bubbling subsided. The reaction mixture was concentrated under reduced pressure to give pale yellow oil. To a separate flask charged with a solution of (45)-4-(propan-2-yl)-l,3-oxazolidin-2-one (4.18 g, 32.4 mmol) in THF (100 mL) at -78 °C was added n-BuLi (2.5M in hexane) (13.0 mL, 32.5 mmol) dropwise via syringe over 5 min. After stirring for 10 min, the above acid chloride dissolved in THF (20 mL) was added via cannula over 15 min. The reaction mixture was warmed to 0 °C, and was allowed to warm to room temperature as the bath warmed and stirred overnight. To the reaction mixture was added saturated NH4CI, and then extracted with EtOAc (2x). The combined organics were washed with brine, dried (Na2S04), filtered and concentrated under reduced pressure. The crude material was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 5% to 60% solvent A/B=hexanes/EtOAc, REDISEP® S1O2 120g). Concentration of appropriate fractions provided Preparation IB (7.39 g, 86%) as a colorless oil: XH NMR (400 MHz, CDC13) δ ppm 4.44 (1 H, dt, J=8.31, 3.53 Hz), 4.30 (1 H, t, J=8.69 Hz), 4.23 (1 H, dd, J=9.06, 3.02 Hz), 2.98-3.08 (2 H, m), 2.32-2.44 (1 H, m, J=13.91, 7.02, 7.02, 4.03 Hz), 2.13-2.25 (2 H, m), 1.88-2.00 (2 H, m), 0.93 (3 H, d, J=7.05 Hz), 0.88 (3 H, d, J=6.80 Hz). Preparation 1C: (25′,3R)-tert-Butyl 6,6,6-trifluoro-3-((5)-4-isopropyl-2-oxooxazolidine- 3 -carbonyl)-2-(3 ,3,3 -trifluoropropyl)hexanoate, and

Preparation ID: (2R,3R)-tert-Butyl 6,6,6-trifluoro-3-((5)-4-isopropyl-2-oxooxazolidine- 3 -carbonyl)- -(3 ,3 ,3 -trifluoropropyl)hexanoate

Figure imgf000067_0001

(1 C) (1 D)

[00221] To a cold (-78 °C), stirred solution of diisopropylamine (5.3 mL, 37.2 mmol) in THF (59 mL) under nitrogen atmosphere was added n-BuLi (2.5M in hexane) (14.7 mL, 36.8 mmol), then warmed to 0 °C to give a 0.5M solution of LDA. A separate vessel was charged with Preparation IB (2.45 g, 9.17 mmol), the material was azeotroped twice with benzene (the RotoVap air inlet was fitted with nitrogen inlet to completely exclude humidity) then toluene (15.3 mL) was added. This solution was added to a flask containing dry lithium chloride (1.96 g, 46.2 mmol). To the resultant mixture, cooled to -78 °C, was added LDA solution (21.0 mL, 10.5 mmol) and stirred at -78 °C for 10 min, warmed to 0 °C for 10 min then recooled to -78 °C. To a separate reaction vessel containing Preparation 1A (3.41 g, 16.07 mmol), also azeotroped twice with benzene, was added toluene (15.3 mL), cooled to -78 °C and LDA (37.0 mL, 18.5 mmol) was added, the resulting solution was stirred at -78° for 25 min. At this time the enolate derived from the ester was transferred via cannula into the solution of the oxazolidinone enolate, stirred at -78 °C for an additional 5 min at which time the septum was removed and solid powdered bis(2-ethylhexanoyloxy)copper (9.02 g, 25.8 mmol) was rapidly added to the reaction vessel and the septum replaced. The vessel was immediately removed from the cold bath and immersed into a warm water bath (40 °C) with rapid swirling with a concomitant color change from the initial turquoise to brown. The reaction mixture was stirred for 20 min, was poured into 5% aqueous NH4OH (360 mL) and extracted with EtOAc (2x). The combined organics were washed with brine, dried (Na2S04), filtered and concentrated under reduced pressure. The residue was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 0% to 60% solvent A/B=hexanes/EtOAc, REDISEP® S1O2 120g). Concentration of appropriate fractions provided Preparation 1C (2.87 g, 66%) as pale yellow viscous oil. XH NMR showed the product was a 1.6: 1 mixture of diastereoisomers 1C: 1D as determined by the integration of the multiplets at 2.74 & 2.84 ppm: XH NMR (400 MHz, CDC13) δ ppm 4.43-4.54 (2 H, m), 4.23-4.35 (5 H, m), 4.01 (1 H, ddd, J=9.54, 6.27, 3.51 Hz), 2.84 (1 H, ddd, J=9.41, 7.28, 3.64 Hz), 2.74 (1 H, ddd, J=10.29, 6.27, 4.02 Hz), 2.37-2.48 (2 H, m, J=10.38, 6.98, 6.98, 3.51, 3.51 Hz), 2.20-2.37 (3 H, m), 1.92-2.20 (8 H, m), 1.64-1.91 (5 H, m), 1.47 (18 H, s), 0.88-0.98 (12 H, m). Preparation IE: (2R,35)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid, and

Preparation IF: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000068_0001

(1 E) (1 F)

[00222] To a cool (0 °C), stirred solution of Preparation 1C and ID (4.54 g, 9.51 mmol) in THF (140 mL) and water (42 mL) was sequentially added hydrogen peroxide (30% in water) (10.3 g, 91 mmol) and LiOH (685.3 mg, 28.6 mmol) and the mixture was stirred for 1 hr. At this time the reaction vessel was removed from the cold bath and then stirred for 1.5 hr. The reaction was judged complete by HPLC. To the reaction mixture was added saturated NaHC03 (45 mL) and saturated a2S03(15 mL), and then partially concentrated under reduced pressure. The resulting crude solution was extracted with DCM (3x). The aqueous phase was acidified to pH~l-2 with IN HC1, extracted with DCM (3x) and EtOAc (lx). The combined organics were washed with brine, dried (Na2S04), filtered and concentrated under reduced pressure to provide a mixture of Preparation IE and IF (3.00 g, 86%) as colorless oil: XH NMR (400 MHz, CDC13) δ ppm 2.76-2.84 (1 H, m, diastereoisomer 2), 2.64-2.76 (3 H, m), 2.04-2.35 (8 H, m), 1.88-2.00 (4 H, m), 1.71-1.83 (4 H, m), 1.48 (9 H, s, diastereoisomer 1), 1.46 (9 H, s, diastereoisomer 2); XH NMR showed a 1.7: 1 mixture of 1E: 1F by integration of the peaks for the ?-butyl groups.

Preparation IE: (2R,35)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid, and

Preparation IF: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000069_0001

(1 E) (1 F)

[00223] To a cold (-78 °C), stirred solution of diisopropylamine (1.7 mL, 11.93 mmol) in THF (19 mL) under nitrogen atmosphere was added n-BuLi (2.5M in hexanes) (4.8 mL, 12.00 mmol). The mixture was stirred for 5 min and then warmed to 0 °C. In a separate vessel, to a cold (-78 °C) stirred solution of the mixture of Preparation IE and IF (1.99 g, 5.43 mmol) in THF (18 mL) was added the LDA solution prepared above via cannula slowly over 25 min. The mixture was stirred for 15 min, then warmed to room temperature (placed in a 24 °C water bath) for 15 min, and then again cooled to -78 °C for 15 min. To the reaction mixture was added Et2AlCl (1M in hexane) (11.4 mL, 1 1.40 mmol) via syringe, stirred for 10 min, warmed to room temperature for 15 min and then cooled back to -78 °C for 15 min. Methanol (25 mL) was rapidly added, swirled vigorously while warming to room temperature, then concentrated to ~l/4 original volume. The mixture was dissolved in EtOAc and washed with IN HCl (50 mL) and ice (75 g). The aqueous phase was separated, extracted with EtOAc (2x). The combined organics were washed with a mixture of KF (2.85g in 75 mL water) and IN HCl (13 mL) [resulting solution pH 3-4], then with brine, dried (Na2S04), filtered and concentrated under reduced pressure to give a 9: 1 (IE: IF) enriched diastereoisomeric mixture (as determined by XH NMR) of Preparation IE and Preparation IF (2.13 g, >99%) as a pale yellow viscous oil: XH NMR (400 MHz, CDC13) δ ppm 2.64-2.76 (2 H, m), 2.04-2.35 (4 H, m), 1.88-2.00 (2 H, m), 1.71-1.83 (2 H, m), 1.48 (9 H, s). Preparation 1 G: (35)-3 -Amino- 1 -methyl-5-phenyl- 1 ,3 -dihydro-2H- 1 ,4-benzodiazepin-2- one, and

Preparation 1H: (3R)-3 -Amino- 1 -methyl-5-phenyl- 1 ,3-dihydro-2H- 1 ,4-benzodiazepin-2- one

Figure imgf000070_0001

(1G) (1 H)

[00224] Racemic 3-amino-l-methyl-5-phenyl-l,3-dihydro-2H-l,4-benzodiazepin-2- one (Rittle, K.E. et al, Tetrahedron Letters, 28(5):521-522 (1987)) was prepared according to the literature procedure. The enantiomers were separated under chiral-SFC conditions using the following method: CHIRALPAK® AS-H 5×25; Mobile phase: 30% MeOH+ 0.1% DEA in C02; Flow rate: 280 mL/min; Pressure: 100 bar; Temperature: 35 °C.

[00225] Obtained the S-enantiomer (Preparation 1G): HPLC: RT=1.75 min (30% MeOH + 0.1% DEA in C02 on CHIRALPAK® AS-H 4.6×250 mm, 3 mL/min, 35 °C, 100 bar, 230 nm, ΙΟμΙ injection); ¾ NMR (400 MHz, CDC13) δ ppm 7.58-7.63 (2 H, m), 7.55 (1 H, ddd, J=8.50, 7.1 1, 1.76 Hz), 7.40-7.47 (1 H, m), 7.34-7.40 (3 H, m), 7.31 (1 H, dd, J=7.81, 1.51 Hz), 7.14-7.22 (1 H, m), 4.46 (1 H, s), 3.44 (3 H, s), 3.42 (2 H, s); [a]D= -155° (c=1.9, MeOH) (Lit. Rittle, K.E. et al, Tetrahedron Letters, 28(5):521-522 (1987): [a]D=-236°).

[00226] Also obtained the R-enantiomer (Preparation 1H): HPLC: RT=1.71 min; [a]D=+165° (c=2.1, MeOH) (Lit [a]D= +227°).

Alternate procedure to make Preparation 1 G:

Preparation 1G»CSA salt: (35)-3-Amino-l-methyl-5-phenyl-l,3-dihydro-2H-l,4- benzodiazepin-2-one, (15)-(+)-10-camphorsulfonic acid salt

Figure imgf000071_0001

[00227] Preparation lG’CSA was prepared from racemic 3-amino-l-methyl-5-phenyl- l,3-dihydro-2H-l,4-benzodiazepin-2-one (9.98g, 37.6 mmol) (prepared according to the literature as shown above) according to the literature procedure (Reider, P.J. et al, J. Org. Chem., 52:955-957 (1987)). Preparation lG’CSA (16.91g, 99%) was obtained as a colorless solid: Optical Rotation: [a]D = -26.99° (c=l, H20) (Lit. [a]D = -27.8° (c=l,

H20))

Preparation II: tert-Butyl (25,,3R)-6,6,6-trifluoro-3-(((35)-l-methyl-2-oxo-5-phenyl-2,3- dihydro- 1 H- 1 ,4-benzodiazepin-3 -yl)carbamoyl)-2-(3 ,3 ,3 -trifluoropropyl)hexanoate, and Preparation 1J: tert-Butyl (2R,3R)-6,6,6-trifluoro-3-(((35)-l-methyl-2-oxo-5-phenyl-2,3- dihydro- 1 H- 1 ,4-benzodiazepin-3 -yl)carbamoyl)-2-(3 ,3 ,3-trifluoropropyl)hexanoate

Figure imgf000071_0002

(11) (U)

[00228] To a stirred solution of Preparation 1G (1.45 g, 5.47 mmol) and a 9: 1 mixture of Preparation IE and IF (1.989 g, 5.43 mmol) in DMF (19 mL) was added O- benzotriazol-l-yl-N,N,N’,N’-tetra-methyluronium tetrafluoroborate (1.79 g, 5.57 mmol) and triethylamine (3.0 mL, 21.52 mmol) and stirred overnight. The reaction was judged complete by LCMS. The reaction mixture was poured into water (125 mL) and the precipitated solid was collected by filtration, washed with water and air dried to provide an 8: 1 mixture of Preparation II and Preparation 1J (2.95 g, 89%) as a cream solid: MS (ES): m/z= 614 [M+H]+;XH NMR (400 MHz, CDC13) δ ppm 7.55-7.65 (3 H, m), 7.44- 7.52 (2 H, m), 7.35-7.45 (4 H, m), 5.52 (1 H, d, J=8.03 Hz), 3.48 (3 H, s), 2.63 (2 H, ddd, J=9.35, 3.95, 3.76 Hz), 2.14-2.25 (4 H, m), 1.90-2.03 (3 H, m), 1.69-1.82 (1 H, m), 1.51 (9 H, s).

Preparation IK: (25,,3R)-6,6,6-Trifluoro-3-(((35)-l-methyl-2-oxo-5-phenyl-2,3-dihydro- lH-l,4-benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid, and

Preparation 1L: (2R,3R)-6,6,6-Trifluoro-3-(((35)-l-methyl-2-oxo-5-phenyl-2,3-dihydro- 1 H- 1 ,4-

Figure imgf000072_0001

(1 K) (1 L)

[00229] To a cool (0 °C), stirred solution of the above mixture of Preparation II and Preparation 1 J (2.95 g, 4.81 mmol) in DCM (20 mL) was added TFA (20 mL, 260 mmol). The reaction mixture was stirred for lhr, then allowed to warm to room temperature and stirred for 2.5 hr. The reaction was judged complete by LCMS. The reaction mixture was diluted with toluene (50 mL) and concentrated under reduced pressure. The residue mixture was redissolved in toluene (50 mL) and concentrated under reduced pressure then dried under high vacuum. The crude product was dissolved in DCM, S1O2 (15g) was added, concentrated, then was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 0% to 45% solvent A/B=DCM/EtOAc, REDISEP® S1O2 80g). Concentration of appropriate fractions provided a mixture of Preparation IK and Preparation 1L (2.00 g, 75%) as a cream solid: HPLC: RT=2.770 min

(CHROMOLITH® SpeedROD 4.6 x 50 mm (4 min grad) eluting with 10-90% aqueous MeOH over 4 minutes containing 0.1% TFA, 4 mL/min, monitoring at 254 nm); MS (ES): m/z= 558 [M+H]+; XH NMR (400 MHz, CDC13) δ ppm 8.32 (1 H, d, J=8.03 Hz), 7.65-7.71 (1 H, m), 7.50-7.60 (3 H, m), 7.41-7.49 (2 H, m), 7.39 (1 H, dd, J=7.91, 1.63 Hz), 7.23-7.35 (2 H, m), 5.59 (1 H, d, J=8.03 Hz), 3.51 (3 H, s), 2.81 (1 H, ddd, J=10.54, 6.90, 3.64 Hz), 2.67-2.76 (1 H, m), 2.22-2.33 (3 H, m), 1.99-2.12 (3 H, m), 1.85-1.94 (1 H, m), 1.79 (1 H, ddd, J=13.87, 7.84, 3.64 Hz). Example 1 :

[00230] To a stirred solution of an 8: 1 mixture of Preparation IK and Preparation 1L (3.46 g, 6.21 mmol) in DMF (25 mL) under nitrogen atmosphere was added ammonium chloride (3.32 g, 62.1 mmol), EDC (3.55 g, 18.52 mmol), HOBT (2.85 g, 18.61 mmol), and triethyl amine (16 mL, 1 15 mmol) and stirred overnight. The reaction was judged complete by LCMS. The reaction mixture was poured into water (200 mL) with vigorous swirling and then allowed to sit. The solid was collected by filtration, washed with water, allowed to dry to afford 3.6 g colorless solid. The solid was purified by preparative SFC chromatography (Lux-Cellulose-2 (3x25cm), 8% methanol in CO2, 140ml/min @220nm and 35 °C; Sample: 3.6g in 50cc methanol, conc.=70mg/ml, Stack injection:

0.5cc/9.2min). Fractions containing product were concentrated, dried overnight under vacuum. Obtained Example 1 (2.74 g, 79%) as a colorless solid (Crystal Form -1): HPLC: RT=9.601 min (H20/CH3CN with TFA, Sunfire CI 8 3.5um, 4.6x150mm, 4.6x150mm, gradient = 15 min, wavelength = 220 and 254 nm). MS (ES): m/z= 557 [M+H]+; XH NMR (400 MHz, DMSO-d6) δ ppm 9.54 (1 H, d, J=7.28 Hz), 7.71-7.80 (1 H, m), 7.68 (2 H, d, J=8.78 Hz), 7.50-7.62 (3 H, m), 7.45 (2 H, t, J=7.28 Hz), 7.29-7.40 (2 H, m), 7.15 (1 H, br. s.), 5.30 (1 H, d, J=7.28 Hz), 3.39 (3 H, s), 2.74-2.86 (1 H, m), 2.02-2.32 (3 H, m), 1.45-1.79 (4 H, m); [a]D = -107.0° (5.73 mg/mL, DMSO).

[00231] Crystal Form A-2 was prepared by adding approximately 1 mg of Example 1 to approximately 0.7 mL of acetone/acetonitrile/water solution (2:2: 1). A mixture of colorless needles and thin blades crystals were obtained after one day of slow evaporation of the solution at room temperature. The thin blade crystals were separated to provide crystal Form A-2.

[00232] Crystal Form EA-3 was prepared by adding approximately 1 mg of Example 1 to approximately 0.7 mL of ethyl acetate/heptane solution (1 : 1). Colorless blade crystals were obtained after three days of slow evaporation of the solution at room temperature.

[00233] Crystal Form THF-2 was obtained by adding approximately 5 mg of Example 1 to approximately 0.7 mL of THF/water solution (4: 1). Colorless blade-like crystals were obtained after one day of solvent evaporation at room temperature.

Alternate Procedure to Make Example 1 : Preparation 1M: 3,3,3-Trifluoropropyl trifluoromethanesulfonate

Figure imgf000074_0001

[00234] To a cold (-25 °C), stirred solution of 2,6-lutidine (18.38 mL, 158 mmol) in CH2CI2 (120 mL) was added Tf20 (24.88 mL, 147 mmol) over 3 min, and stirred for 5 min. To the reaction mixture was added 3,3,3-trifluoropropan-l-ol (12 g, 105 mmol) over an interval of 3 min. After 2 hr, the reaction mixture was warmed to room temperature and stirred for 1 hr. The reaction mixture was concentrated to half volume, then purified by loading directly on silica gel column (330g ISCO) and eluted with CH2C12. Obtained Preparation 1M (13.74 g, 53%) as a colorless oil. XH NMR (400 MHz, CDCI3) δ ppm 4.71 (2 H, t, J=6.15 Hz), 2.49-2.86 (2 H, m).

Preparation IN: (45)-4-Benzyl- -(5,5,5-trifluoropentanoyl)-l,3-oxazolidin-2-one

Figure imgf000074_0002

[00235] Preparation IN was prepared from 5,5,5-trifluoropentanoic acid (3.35 g, 21.46 mmol) and (45)-4-benzyl-l,3-oxazolidin-2-one (3.80 g, 21.46 mmol) by the general methods shown for Preparation IB. Preparation IN (5.67 g, 84%) was obtained as a colorless viscous oil: XH NMR (400 MHz, CDC13) δ ppm 7.32-7.39 (2 H, m), 7.30 (1 H, d, J=7.05 Hz), 7.18-7.25 (2 H, m), 4.64-4.74 (1 H, m), 4.17-4.27 (2 H, m), 3.31 (1 H, dd, J=13.35, 3.27 Hz), 3.00-3.1 1 (2 H, m), 2.79 (1 H, dd, J=13.35, 9.57 Hz), 2.16-2.28 (2 H, m), 1.93-2.04 (2 H, m).

Preparation 10: tert-Butyl (3R)-3-(((45)-4-benzyl-2-oxo-l,3-oxazolidin-3-yl)carbonyl)- 6,6,6-trifluorohexanoate

Figure imgf000075_0001

[00236] To a cold (-78 °C), stirred solution of Preparation IN (3.03 g, 9.61 mmol) in THF (20 mL) was added NaHMDS (1.0M in THF) (10.6 mL, 10.60 mmol) under nitrogen atmosphere. After 2 hours, tert-butyl 2-bromoacetate (5.62 g, 28.8 mmol) was added neat via syringe at -78 °C and stirring was maintained at the same temperature. After 6 hours, the reaction mixture was warmed to room temperature. The reaction mixture was partitioned between saturated NH4C1 and EtOAc. The organic phase was separated, and the aqueous was extracted with EtOAc (3x). The combined organics were washed with brine, dried (Na2S04), filtered and concentrated under reduced pressure. The residue was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 5% to 100% solvent A/B=hexanes/EtO Ac, REDISEP® Si02 120g). Concentration of appropriate fractions provided Preparation 10 (2.79 g, 67.6%) as a colorless viscous oil: XH NMR (400 MHz, CDC13) δ ppm 7.34 (2 H, d, J=7.30 Hz), 7.24-7.32 (3 H, m), 4.62- 4.75 (1 H, m, J=10.17, 6.89, 3.43, 3.43 Hz), 4.15-4.25 (3 H, m), 3.35 (1 H, dd, J=13.60, 3.27 Hz), 2.84 (1 H, dd, J=16.62, 9.57 Hz), 2.75 (1 H, dd, J=13.35, 10.07 Hz), 2.47 (1 H, dd, J=16.62, 4.78 Hz), 2.1 1-2.23 (2 H, m), 1.90-2.02 (1 H, m), 1.72-1.84 (1 H, m), 1.44 (9 H, s). -2-(2-tert-Butoxy-2-oxoethyl)-5,5,5-trifluoropentanoic acid

Figure imgf000075_0002

[00237] Preparation IP was prepared from Preparation 10 (2.79 g, 6.50 mmol) by the general methods shown for Preparation IE. Preparation IP (1.45 g, 83%) was obtained as a colorless oil: XH NMR (400 MHz, CDC13) δ ppm 2.83-2.95 (1 H, m), 2.62-2.74 (1 H, m), 2.45 (1 H, dd, J=16.62, 5.79 Hz), 2.15-2.27 (2 H, m), 1.88-2.00 (1 H, m), 1.75-1.88 (1 H, m), 1.45 (9 H, s). Preparation IE: (2R,35′)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid, and

Preparation IF: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000076_0001

(1 E) (1 F)

[00238] To a cold (-78 °C), stirred solution of Preparation IP (5.44 g, 20.13 mmol) in THF (60 mL) was slowly added LDA (24.60 mL, 44.3 mmol) over 7 min. After stirring for 2 hr, Preparation 1M (6.44 g, 26.2 mmol) was added to the reaction mixture over 3 min. After 45 min, the reaction mixture was warmed to -25 °C bath (ice/MeOH/dry ice) for 1 hr, and then warmed to 0 °C. After 45 min, Preparation 1M (lg) was added and the reaction mixture was stirred for 20 min. The reaction was quenched with water and IN NaOH and was extracted with (¾(¾. The organic layer was again extracted with IN NaOH (2x) and the aqueous layers were combined. The aqueous layer was cooled in ice/water bath and then acidified with concentrated HCl to pH 2. Next, the aqueous layer was extracted with EtOAc. The combined organics were washed with brine, dried over anhydrous sodium sulphate, and concentrated under reduced pressure. The residue was dried under high vacuum to provide a 1 :5 (IE: IF) mixture (as determined by XH NMR) of Preparation IE and Preparation IF (5.925 g, 80%) as a pale yellow solid. XH NMR (500 MHz, CDC13) 8 ppm 2.81 (1 H, ddd, J=10.17, 6.32, 3.85 Hz), 2.63-2.76 (1 H, m), 2.02- 2.33 (4 H, m), 1.86-1.99 (2 H, m), 1.68-1.85 (2 H, m), 1.47 (9 H, s).

Preparation IE: (2R,35)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid, and

Preparation IF: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000077_0001

(1 E) (1 F)

[00239] A mixture of Preparation IE and Preparation IF (64 mg, 1.758 mmol) was taken in THF (6 mL) to give a colorless solution which was cooled to -78 °C. Then, LDA (2.149 mL, 3.87 mmol) (1.8M in heptane/THF/ethylbenzene) was slowly added to the reaction mixture over 10 min. After stirring for 15 min the reaction mixture was placed in a room temperature water bath. After 15 min the reaction mixture was placed back in -78 °C bath and then diethylaluminum chloride (3.87 mL, 3.87 mmol) (1M in hexane) was added slowly over 5 min. The reaction mixture was stirred at -78 °C. After 15 min the reaction mixture was placed in a room temperature water bath for 10 min and then cooled back to -78 °C bath. After 15 min the reaction was quenched with MeOH (8 mL, 198 mmol), removed from the -78 °C bath and concentrated. To the reaction mixture was added ice and HC1 (16 mL, 16.00 mmol), followed by extraction with EtOAc (2x). The organic layer was washed with potassium fluoride (920 mg, 15.84 mmol) (in 25 mL FLO) and HC1 (4.5 mL, 4.50 mmol). The organics were dried over anhydrous magnesium sulphate and concentrated under reduced pressure to provide a 9: 1 (IE: IF) enriched mixture of Preparation IE and Preparation IF (540 mg, 1.583 mmol, 90% yield) as light yellow/orange solid. ¾ NMR (400 MHz, CDC13) δ ppm 2.64-2.76 (2 H, m), 2.04-2.35 (4 H, m), 1.88-2.00 (2 H, m), 1.71-1.83 (2 H, m), 1.48 (9 H, s). It was converted to Example 1 by the sequence of reactions as outlined above.

Alternate procedure to make Preparation IE:

Preparation 1Q: (2R,35)- -Benzyl 4-tert-butyl 2,3-bis(3,3,3-trifluoropropyl)succinate

Figure imgf000077_0002

(1Q) [00240] A clean and dry 5 L four neck round bottom flask equipped with mechanical stirring, thermometer socket and nitrogen bubbler at room temperature was charged with Ν,Ν-dimethyl formamide (2.07 L), a 1.2: 1 mixture of Preparation IE and Preparation IF (207 g, 0.5651 moles), potassium carbonate (1 17.1 g, 0.8476 moles) followed by benzyl bromide (116 g, 0.6781 moles) over 15-20 min. The reaction mixture was stirred for 2-3 hr. After completion of the reaction, the reaction mixture was concentrated to dryness at 50-55 °C under vacuum. Ethyl acetate (3.1 L, 30 Vol.) was charged into the concentrated reaction mass and then washed with water (2.07 L), brine (0.6 L) then dried over anhydrous sodium sulfate (207 g), filtered and concentrated to dryness at 40-45 °C under vacuum. The residue was dissolved in dichloromethane (1.035 L, 5 vol.) and then absorbed onto silica gel (60-120) (607 g, 3.0 w/w), then was purified with column chromatography using petroleum ether and ethyl acetate as solvents. After pooling several batches, Preparation 1Q (235 g) was obtained. HPLC purity: 99.77%, Preparation IE: (2R,35)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000078_0001

[00241] A clean and dry 2 L autoclave was charged with methanol (540 mL) and was purged with nitrogen for 5-10 minutes. To the autoclave was added 10% palladium on carbon (12 g, 20%), purged with nitrogen once again for 5-10 min then was charged with Preparation 1Q (60g, 0.1315 moles), the autoclave was flushed with methanol (60mL) and stirred for 4-6 hr at 20-25 °C under 5Kg hydrogen pressure. After completion of the reaction, the reaction mass was filtered through CELITE®, washed with methanol (180 mL), dried with anhydrous sodium sulfate (60 g), filtered and concentrated to dryness at 45-50 °C under vacuum. Obtained Preparation IE (45.8 g, 95%) as a colorless solid: HPLC purity: 98.9%.

Alternate procedure to make Preparation IE: Preparation IE: (2R,35)-3-(te^Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3- trifluoropropyl)hexanoic acid

Figure imgf000079_0001

[00242] Preparation IE was prepared in a procedure identical as above from a mixture of Preparations IE and IF (200g, 0.5460 moles) using LDA (1.8 M solution in THF, ethyl benzene and heptane) (698mL, 2.3equiv.) and diethyl aluminum chloride (1.0 M solution in hexane) (1256mL, 2.3equiv) in THF (2.0L). After workup as explained above, the resulting residue was treated as follows: The crude material was added to a 2L four neck round bottom flask, followed by the addition of MTBE (1.0L) charged below 30 °C. The resulting mixture was stirred for 5-10 minutes to obtain a clear solution.

Hexanes (600mL) was charged to the reaction mixture at a temperature below 30 °C. The reaction mixture was stirred for 10 min. Next, tert-butylamine (43.8g, l. leq) was charged slowly over a period of 15 minutes below 30 °C. This addition was observed to be exothermic. The reaction mixture was stirred for 2 hrs below 30 °C and filtered. The solid material was washed with 5:3 MTBE: hexane (200mL), the filtrate was

concentrated and transferred to an amber color bottle. The filtered solid was dissolved in dichloromethane (2.0L), washed with IN HC1 (2.0), the organic layer was washed with brine (1.0L x 2), then was concentrated under reduced pressure below 45 °C. This material was found to be 91.12% pure. The material was repurified by the above t- butylamine crystallization purification procedure. Obtained Preparation IE (78 g, 39%): HPLC purity: 99.54%.

Alternate procedure to make Example 1 :

Preparation II: tert-Butyl (25,,3R)-6,6,6-trifluoro-3-(((35)-l-methyl-2-oxo-5-phenyl-2,3- dihydro- 1 H- 1 ,4-benzodiazepin-3 -yl)carbamoyl)-2-(3 ,3 ,3 -trifluoropropyl)hexanoate

Figure imgf000080_0001

[00243] A clean and dry 2 L four neck round bottom flask equipped with mechanical stirring, thermometer socket and nitrogen bubbler was charged with N,N- dimethylformamide (457 mL), Preparation IE (45.7g, 0.1248moles) and Preparation lG’CSA (62.08g, 0.1248moles) under nitrogen atmosphere at 20-25 °C. The reaction mixture was stirred for 15-20 minutes to make clear solution at 20-25 °C. To the reaction mixture was added TBTU (48.16g, 0.1498 moles) at 20-25 °C followed by triethylamine (50.51g, 0.4992 moles) over 15-20 minutes at 20-25 °C. The reaction mixture was stirred for 60-120 minutes at 20-25 °C under nitrogen atmosphere. After completion of the reaction, the reaction was quenched into water (1.37L, 30 Vol.) at 20-25 °C under stirring. The reaction mixture was stirred for 30 minutes at 20-25 °C. The reaction mixture was filtered and washed with water (228 mL). The resulting solid material was dissolved in ethyl acetate (457 mL), washed with water (2×137 mL), brine (137 mL), and then dried with anhydrous sodium sulfate (45.7g). Activated charcoal (9.14 g, 20%) was charged into the reaction mixture and stirred for 30 minutes. The mixture was filtered through CELITE® bed and 1 micron filter cloth, washed charcoal bed with ethyl acetate (137 mL), concentrated to 1.0 Vol. stage and then petroleum ether (457 mL, 10 Vol.) was charged and stirred for 30 minutes at 20-25 °C. The solid was collected by filtration, washed with petroleum ether (137 mL) and then dried under vacuum at 40-45 °C for 8 hr until loss on drying was less than 3.0%. Obtained Preparation II (65.2 g, 85%): HPLC purity: 98.26%.

Preparation IK: (25,,3R)-6,6,6-Trifluoro-3-(((35)-l-methyl-2-oxo-5-phenyl-2,3-dihydro- 1 H- 1 ,4-benzodiazepin-3 -yl)carbamoyl)-2-(3 ,3 ,3 -trifluoropropyl)hexanoic acid

Figure imgf000081_0001

[00244] A clean and dry 3 L four neck round bottom flask equipped with mechanical stirring, thermometer socket and nitrogen bubbler was charged with dichloromethane (980 mL) under nitrogen atmosphere followed by Preparation II (140 g, 0.2282 moles) at 20-25 °C. The reaction mixture was cooled to 0-5 °C and trifluoroacetic acid (980 mL) was charged slowly for 30-40 minutes. The resulting mixture was stirred for 2 hr at 0-5 °C under nitrogen atmosphere. The reaction temperature was raised to 20 to 25 °C, and the reaction mixture was stirred for 1-2 hr at 20 to 25 °C. After completion of the reaction, the reaction mixture was concentrated to dryness at 50 to 55 °C under vacuum. Toluene (3×700 mL,) was charged into the concentrated reaction mass, and then distilled off at 50 to 55 °C under vacuum. After complete concentration from toluene, ethyl acetate (280 mL) was charged into the reaction mass at 20 to 25 °C, stirred for 60 minutes, then the solid was collected by filtration, washed with ethyl acetate (140 mL), dried under vacuum at 50 to 55 °C for 12 hr until loss on drying was less than 2.0%. Obtained Preparation IK (106 g, 84%): HPLC purity: 98.43%.

Example 1 :

[00245] A reaction vessel was charged with Preparation IK (30 g, 53.81 mmol), HOBt (8.7g, 64.38 mmol), and THF (150 mL) at room temperature. To the homogeneous solution was added EDCI (12.4g, 64.68 mmol), stirred for 15 min, then cooled to 8 °C. To the reaction mixture was added ammonia (2M in IP A) (81 mL, 162 mmol) over 5 min so as to maintain a temperature below 10 °C. The resulting heavy slurry was stirred for 10 min, warmed to room temperature over 30 min, then stirred for 4 hr. At the completion of the reaction, water (230 mL) was slowly added over 15 min to maintain a temperature below 20 °C, and then stirred for 2 hr. The solid was collected by filtration, washed with water (3X60 mL), then dried under vacuum 48 hr at 55 °C. The above crude product was charged into a 1 L 3 -necked round flask. IP A (200 mL) was added, then heated to 80 °C resulting in a homogeneous solution. Water (170 mL) was slowly added (15 min) to maintain an internal temperature >75 °C. The resulting slurry was stirred and cooled to room temperature for 2 hr. The solid was collected by filtration, washed with water (2 X 50 mL), then dried under vacuum (55 °C for 24 h, and 30 °C for 48 h).

Obtained Example 1 (23.4 g, 78% yield): HPLC purity: 99.43%.

Example 2 NOT SAME

WITHOUT METHYL GROUP

(2R,35)-N-((35)-2-Oxo-5-phenyl-2,3-dihydro-lH-l,4-benzodiazepin-3-yl)-2,3-bis(3,3,3- trifluoropropyl)succinamide

Figure imgf000082_0001

Preparation 2A: (35)-3-Amino-5-phenyl-l,3-dihydro-2H-l,4-benzodiazepin-2-one, and Preparation 2B: -3-Amino-5-phenyl-l,3-dihydro-2H-l,4-benzodiazepin-2-one

Figure imgf000082_0002

(2A) (2B)

[00246] Racemic 3-amino-5-phenyl-l,3-dihydro-2H-l,4-benzodiazepin-2-one (J. Med. Chem., 49:231 1-2319 (2006), compound# 5) was prepared according to the literature procedure. The enantiomers were separated on Berger SFC MGIII Column: Lux 25X3 cm, 5cm; Mobile phase: 30% MeOH+ 0.1% DEA in C02; Flow rate: 150 mL/min;

Temperature: 40 °C; Detector wavelength: 250 nM. Obtained the S-enantiomer

Preparation 2A as a white solid: XH NMR (400 MHz, DMSO-d6) δ ppm 10.67 (1 H, br. s.), 7.58 (1 H, td, J=7.65, 1.76 Hz), 7.37-7.53 (5 H, m), 7.23-7.30 (2 H, m), 7.14-7.22 (1 H, m), 4.23 (1 H, s), 2.60 (2 H, br. s.); HPLC: RT=3.0625 min (30% MeOH + 0.1% DEA in C02 on OD-H Column, 3 mL/min, 35 °C, 96 bar, 230 nm, ΙΟμΙ inj); [a]D = -208.3° (5.05 mg/niL, MeOH). Also obtained the R-enantiomer Preparation 2B as an off white solid: HPLC: RT=3.970 min; [a]D = 182.1° (2.01 mg/mL, MeOH).

Preparation 2C: tert-Butyl (25,,3R)-6,6,6-trifluoro-3-(((35)-2-oxo-5-phenyl-2,3-dihydro- 1 H- 1 ,4-benzodiazepin-3 -yl)carbamoyl)-2-(3 ,3 ,3 -trifluoropropyl)hexanoate, and

Preparation 2D: tert-Butyl (2R,3R)-6,6,6-trifluoro-3-(((35)-2-oxo-5-phenyl-2,3-dihydro- 1 H- -benzodiazepin-3 -yl)carbamoyl)-2-(3 ,3 ,3 -trifluoropropyl)hexanoate

Figure imgf000083_0001

(2C) (2D)

[00247] Preparation 2C was prepared from Preparation 2A (564 mg, 2.244 mmol) and a mixture of Preparation IE and Preparation IF (822 mg, 2.244 mmol) according to the general procedure shown for Preparation II. Obtained Preparation 2C and Preparation 2D (1.31 g, 97%): HPLC: RT=3.443 min (CHROMOLITH® ODS 4.6 x 50 mm (4 min grad) eluting with 10-90% aqueous MeOH over 4 minutes containing 0.% TFA, 4 mL/min, monitoring at 220 nm); MS (ES): m/z= 600.3 [M+H]+.

Preparation 2E: (25′,3R)-6,6,6-Trifluoro-3-(((35)-2-oxo-5-phenyl-2,3-dihydro-lH-l,4- benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid, and

Preparation 2F: (2R,3R)-6,6,6-Trifluoro-3-(((35)-2-oxo-5-phenyl-2,3-dihydro-lH-l,4- benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid

Figure imgf000083_0002

(2E) (2F) [00248] A mixture of Preparation 2E and Preparation 2F was prepared from a mixture of Preparation 2C and Preparation 2D (1.3 lg, 2.185 mmol) by the general methods shown for Preparation IK. Obtained a mixture of Preparation 2E and Preparation 2F (1.18 g, 99%): HPLC: RT=2.885 min (CHROMOLITH® ODS 4.6 x 50 mm (4 min grad) eluting with 10-90% aqueous MeOH over 4 minutes containing 0.% TFA, 4 mL/min, monitoring at 220 nm). MS (ES): m/z= 544.2 [M+H]+.

Example 2:

[00249] Example 2 was prepared from a mixture of Preparation 2E and Preparation 2F (354 mg, 0.651 mmol) by the general methods shown for Example 1. After separation of the diastereoisomers, Example 2 was obtained (188 mg, 52%) as a white solid: HPLC: RT=9.063 min (H20/CH3CN with TFA, Sunfire C18 3.5um, 4.6x150mm, 4.6x150mm, gradient = 15 min, wavelength = 220 and 254 nm); MS (ES): m/z= 543 [M+H]+; XH NMR (400 MHz, DMSO-d6) δ ppm 10.87 (1 H, br. s.), 9.50-9.55 (1 H, m), 7.62-7.69 (2 H, m), 7.40-7.57 (5 H, m), 7.29-7.36 (2 H, m), 7.22-7.28 (1 H, m), 7.16 (1 H, br. s.), 5.25 (1 H, d), 3.30-3.32 (1 H, m), 2.75-2.86 (1 H, m), 2.44-2.48 (1 H, m), 2.06-2.34 (3 H, m), 1.51- 1.77 (4 H, m); [a]D = -114.4° (8.04 mg/mL, DMSO).

[00250] Crystal Form M2- 1 was prepared by adding approximately 1 mg of Example 2 to approximately 0.7 mL of MeOH/fluorobenzene solution (3 : 1). Colorless plate-like crystals were obtained after 2 days of solvent evaporation at room temperature.

PATENT

US-20160060232-A1

https://patentscope.wipo.int/search/en/detail.jsf?docId=US159930181&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCTDescription

Example 1

(2R,3S)—N-((3S)-1-Methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)-2,3-bis(3,3,3-trifluoropropyl)succinamide


Preparation 1A: tert-Butyl 5,5,5-trifluoropentanoate


      To a stirred solution of 5,5,5-trifluoropentanoic acid (5 g, 32.0 mmol) in THF (30 mL) and hexane (30 mL) at 0° C., was added tert-butyl 2,2,2-trichloroacetimidate (11.46 mL, 64.1 mmol). The mixture was stirred for 15 min at 0° C. Boron trifluoride etherate (0.406 mL, 3.20 mmol) was added and the reaction mixture was allowed to warm to room temperature overnight. To the clear reaction mixture was added solid NaHCO3 (5 g) and stirred for 30 min. The mixture was filtered through MgSO4 and washed with hexanes (200 mL). The solution was allowed to rest for 45 min, and the resulting solid material was removed by filtering on the same MgSO4 filter again, washed with hexanes (100 mL) and concentrated under reduced pressure without heat. The volume was reduced to about 30 mL, filtered through a clean fitted funnel, washed with hexane (5 mL), and then concentrated under reduced pressure without heat. The resulting neat oil was filtered through a 0.45 μm nylon membrane filter disk to provide tert-butyl 5,5,5-trifluoropentanoate (6.6 g, 31.4 mmol 98% yield) as a colorless oil: 1H NMR (400 MHz, CDCl3) δ ppm 1.38 (s, 9H) 1.74-1.83 (m, 2H) 2.00-2.13 (m, 2H) 2.24 (t, J=7.28 Hz, 2H).

Preparation 1B: (4S)-4-(Propan-2-yl)-3-(5,5,5-trifluoropentanoyl)-1,3-oxazolidin-2-one


      To a stirred solution of 5,5,5-trifluoropentanoic acid (5.04 g, 32.3 mmol) in DCM (50 mL) and DMF (3 drops) was added oxalyl chloride (3.4 mL, 38.8 mmol) dropwise over 5 min and the solution was stirred until all bubbling subsided. The reaction mixture was concentrated under reduced pressure to give pale yellow oil. To a separate flask charged with a solution of (4S)-4-(propan-2-yl)-1,3-oxazolidin-2-one (4.18 g, 32.4 mmol) in THF (100 mL) at −78° C. was added n-BuLi (2.5M in hexane) (13.0 mL, 32.5 mmol) dropwise via syringe over 5 min. After stirring for 10 min, the above acid chloride dissolved in THF (20 mL) was added via cannula over 15 min. The reaction mixture was warmed to 0° C., and was allowed to warm to room temperature as the bath warmed and stirred overnight. To the reaction mixture was added saturated NH4Cl, and then extracted with EtOAc (2×). The combined organics were washed with brine, dried (Na2SO4), filtered and concentrated under reduced pressure. The crude material was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 5% to 60% solvent A/B=hexanes/EtOAc, REDISEP® SiO2 120 g). Concentration of appropriate fractions provided Preparation 1B (7.39 g, 86%) as a colorless oil: 1H NMR (400 MHz, CDCl3) δ ppm 4.44 (1H, dt, J=8.31, 3.53 Hz), 4.30 (1H, t, J=8.69 Hz), 4.23 (1H, dd, J=9.06, 3.02 Hz), 2.98-3.08 (2H, m), 2.32-2.44 (1H, m, J=13.91, 7.02, 7.02, 4.03 Hz), 2.13-2.25 (2H, m), 1.88-2.00 (2H, m), 0.93 (3H, d, J=7.05 Hz), 0.88 (3H, d, J=6.80 Hz).

Preparation 1C: (2S,3R)-tert-Butyl 6,6,6-trifluoro-3-((S)-4-isopropyl-2-oxooxazolidine-3-carbonyl)-2-(3,3,3-trifluoropropyl)hexanoate, and

Preparation 1D: (2R,3R)-tert-Butyl 6,6,6-trifluoro-3-((S)-4-isopropyl-2-oxooxazolidine-3-carbonyl)-2-(3,3,3-trifluoropropyl)hexanoate


      To a cold (−78° C.), stirred solution of diisopropylamine (5.3 mL, 37.2 mmol) in THF (59 mL) under nitrogen atmosphere was added n-BuLi (2.5M in hexane) (14.7 mL, 36.8 mmol), then warmed to 0° C. to give a 0.5M solution of LDA. A separate vessel was charged with Preparation 1B (2.45 g, 9.17 mmol), the material was azeotroped twice with benzene (the RotoVap air inlet was fitted with nitrogen inlet to completely exclude humidity) then toluene (15.3 mL) was added. This solution was added to a flask containing dry lithium chloride (1.96 g, 46.2 mmol). To the resultant mixture, cooled to −78° C., was added LDA solution (21.0 mL, 10.5 mmol) and stirred at −78° C. for 10 min, warmed to 0° C. for 10 min then recooled to −78° C. To a separate reaction vessel containing Preparation 1A (3.41 g, 16.07 mmol), also azeotroped twice with benzene, was added toluene (15.3 mL), cooled to −78° C. and LDA (37.0 mL, 18.5 mmol) was added, the resulting solution was stirred at −78° for 25 min. At this time the enolate derived from the ester was transferred via cannula into the solution of the oxazolidinone enolate, stirred at −78° C. for an additional 5 min at which time the septum was removed and solid powdered bis(2-ethylhexanoyloxy)copper (9.02 g, 25.8 mmol) was rapidly added to the reaction vessel and the septum replaced. The vessel was immediately removed from the cold bath and immersed into a warm water bath (40° C.) with rapid swirling with a concomitant color change from the initial turquoise to brown. The reaction mixture was stirred for 20 min, was poured into 5% aqueous NH4OH (360 mL) and extracted with EtOAc (2×). The combined organics were washed with brine, dried (Na2SO4), filtered and concentrated under reduced pressure. The residue was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 0% to 60% solvent A/B=hexanes/EtOAc, REDISEP® SiO2 120 g). Concentration of appropriate fractions provided Preparation 1C (2.87 g, 66%) as pale yellow viscous oil. 1H NMR showed the product was a 1.6:1 mixture of diastereoisomers 1C:1D as determined by the integration of the multiplets at 2.74 & 2.84 ppm: 1H NMR (400 MHz, CDCl3) δ ppm 4.43-4.54 (2H, m), 4.23-4.35 (5H, m), 4.01 (1H, ddd, J=9.54, 6.27, 3.51 Hz), 2.84 (1H, ddd, J=9.41, 7.28, 3.64 Hz), 2.74 (1H, ddd, J=10.29, 6.27, 4.02 Hz), 2.37-2.48 (2H, m, J=10.38, 6.98, 6.98, 3.51, 3.51 Hz), 2.20-2.37 (3H, m), 1.92-2.20 (8H, m), 1.64-1.91 (5H, m), 1.47 (18H, s), 0.88-0.98 (12H, m).

Preparation 1E: (2R,3S)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid, and

Preparation 1F: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid


      To a cool (0° C.), stirred solution of Preparation 1C and 1D (4.54 g, 9.51 mmol) in THF (140 mL) and water (42 mL) was sequentially added hydrogen peroxide (30% in water) (10.3 g, 91 mmol) and LiOH (685.3 mg, 28.6 mmol) and the mixture was stirred for 1 hr. At this time the reaction vessel was removed from the cold bath and then stirred for 1.5 hr. The reaction was judged complete by HPLC. To the reaction mixture was added saturated NaHCO3(45 mL) and saturated Na2SO3 (15 mL), and then partially concentrated under reduced pressure. The resulting crude solution was extracted with DCM (3×). The aqueous phase was acidified to pH-1-2 with 1N HCl, extracted with DCM (3×) and EtOAc (1×). The combined organics were washed with brine, dried (Na2SO4), filtered and concentrated under reduced pressure to provide a mixture of Preparation 1E and 1F (3.00 g, 86%) as colorless oil: 1H NMR (400 MHz, CDCl3) δ ppm 2.76-2.84 (1H, m, diastereoisomer 2), 2.64-2.76 (3H, m), 2.04-2.35 (8H, m), 1.88-2.00 (4H, m), 1.71-1.83 (4H, m), 1.48 (9H, s, diastereoisomer 1), 1.46 (9H, s, diastereoisomer 2); 1H NMR showed a 1.7:1 mixture of 1E:1F by integration of the peaks for the t-butyl groups.

Preparation 1E: (2R,3S)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid, and

Preparation 1F: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid


      To a cold (−78° C.), stirred solution of diisopropylamine (1.7 mL, 11.93 mmol) in THF (19 mL) under nitrogen atmosphere was added n-BuLi (2.5M in hexanes) (4.8 mL, 12.00 mmol). The mixture was stirred for 5 min and then warmed to 0° C. In a separate vessel, to a cold (−78° C.) stirred solution of the mixture of Preparation 1E and 1F (1.99 g, 5.43 mmol) in THF (18 mL) was added the LDA solution prepared above via cannula slowly over 25 min. The mixture was stirred for 15 min, then warmed to room temperature (placed in a 24° C. water bath) for 15 min, and then again cooled to −78° C. for 15 min. To the reaction mixture was added Et2AlCl (1M in hexane) (11.4 mL, 11.40 mmol) via syringe, stirred for 10 min, warmed to room temperature for 15 min and then cooled back to −78° C. for 15 min. Methanol (25 mL) was rapidly added, swirled vigorously while warming to room temperature, then concentrated to ˜¼ original volume. The mixture was dissolved in EtOAc and washed with 1N HCl (50 mL) and ice (75 g). The aqueous phase was separated, extracted with EtOAc (2×). The combined organics were washed with a mixture of KF (2.85 g in 75 mL water) and 1N HCl (13 mL) [resulting solution pH 3-4], then with brine, dried (Na2SO4), filtered and concentrated under reduced pressure to give a 9:1 (1E:1F) enriched diastereoisomeric mixture (as determined by 1H NMR) of Preparation 1E and Preparation 1F (2.13 g, >99%) as a pale yellow viscous oil: 1H NMR (400 MHz, CDCl3) δ ppm 2.64-2.76 (2H, m), 2.04-2.35 (4H, m), 1.88-2.00 (2H, m), 1.71-1.83 (2H, m), 1.48 (9H, s).

Preparation 1G: (3S)-3-Amino-1-methyl-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one, and

Preparation 1H: (3R)-3-Amino-1-methyl-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one


      Racemic 3-amino-1-methyl-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one (Rittle, K. E. et al., Tetrahedron Letters, 28(5):521-522 (1987)) was prepared according to the literature procedure. The enantiomers were separated under chiral-SFC conditions using the following method: CHIRALPAK® AS-H 5×25; Mobile phase: 30% MeOH+0.1% DEA in CO2; Flow rate: 280 mL/min; Pressure: 100 bar; Temperature: 35° C.
      Obtained the S-enantiomer (Preparation 1G): HPLC: RT=1.75 min (30% MeOH+0.1% DEA in CO2 on CHIRALPAK® AS-H 4.6×250 mm, 3 mL/min, 35° C., 100 bar, 230 nm, 10 μl injection); 1H NMR (400 MHz, CDCl3) δ ppm 7.58-7.63 (2H, m), 7.55 (1H, ddd, J=8.50, 7.11, 1.76 Hz), 7.40-7.47 (1H, m), 7.34-7.40 (3H, m), 7.31 (1H, dd, J=7.81, 1.51 Hz), 7.14-7.22 (1H, m), 4.46 (1H, s), 3.44 (3H, s), 3.42 (2H, s); [α]D=−155° (c=1.9, MeOH) (Lit. Rittle, K. E. et al.,Tetrahedron Letters, 28(5):521-522 (1987): [α]D=−236°).
      Also obtained the R-enantiomer (Preparation 1H): HPLC: RT=1.71 min; [α]D=+165° (c=2.1, MeOH) (Lit [α]D=+227°).

Alternate Procedure to Make Preparation 1G

Preparation 1G•CSA salt: (3S)-3-Amino-1-methyl-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one, (1 S)-(+)-10-camphorsulfonic acid salt


      Preparation 1G•CSA was prepared from racemic 3-amino-1-methyl-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one (9.98 g, 37.6 mmol) (prepared according to the literature as shown above) according to the literature procedure (Reider, P. J. et al., J. Org. Chem., 52:955-957 (1987)). Preparation 1G•CSA (16.91 g, 99%) was obtained as a colorless solid: Optical Rotation: [α]D=−26.99° (c=1, H2O) (Lit. [α]D=−27.8° (c=1, H2O))

Preparation 1I: tert-Butyl (2S,3R)-6,6,6-trifluoro-3-(((3S)-1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoate, and

Preparation 1J: tert-Butyl (2R,3R)-6,6,6-trifluoro-3-(((3S)-1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoate

      To a stirred solution of Preparation 1G (1.45 g, 5.47 mmol) and a 9:1 mixture of Preparation 1E and 1F (1.989 g, 5.43 mmol) in DMF (19 mL) was added 0-benzotriazol-1-yl-N,N,N′,N′-tetra-methyluronium tetrafluoroborate (1.79 g, 5.57 mmol) and triethylamine (3.0 mL, 21.52 mmol) and stirred overnight. The reaction was judged complete by LCMS. The reaction mixture was poured into water (125 mL) and the precipitated solid was collected by filtration, washed with water and air dried to provide an 8:1 mixture of Preparation 1I and Preparation 1J (2.95 g, 89%) as a cream solid: MS (ES): m/z=614 [M+H]+; 1H NMR (400 MHz, CDCl3) δ ppm 7.55-7.65 (3H, m), 7.44-7.52 (2H, m), 7.35-7.45 (4H, m), 5.52 (1H, d, J=8.03 Hz), 3.48 (3H, s), 2.63 (2H, ddd, J=9.35, 3.95, 3.76 Hz), 2.14-2.25 (4H, m), 1.90-2.03 (3H, m), 1.69-1.82 (1H, m), 1.51 (9H, s).

Preparation 1K: (2S,3R)-6,6,6-Trifluoro-3-(((3S)-1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid, and

Preparation 1L: (2R,3R)-6,6,6-Trifluoro-3-(((3S)-1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid

      To a cool (0° C.), stirred solution of the above mixture of Preparation 1I and Preparation 1J (2.95 g, 4.81 mmol) in DCM (20 mL) was added TFA (20 mL, 260 mmol). The reaction mixture was stirred for 1 hr, then allowed to warm to room temperature and stirred for 2.5 hr. The reaction was judged complete by LCMS. The reaction mixture was diluted with toluene (50 mL) and concentrated under reduced pressure. The residue mixture was redissolved in toluene (50 mL) and concentrated under reduced pressure then dried under high vacuum. The crude product was dissolved in DCM, SiO2(15 g) was added, concentrated, then was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 0% to 45% solvent A/B=DCM/EtOAc, REDISEP® SiO2 80 g). Concentration of appropriate fractions provided a mixture of Preparation 1K and Preparation 1L (2.00 g, 75%) as a cream solid: HPLC: RT=2.770 min (CHROMOLITH® SpeedROD 4.6×50 mm (4 min grad) eluting with 10-90% aqueous MeOH over 4 minutes containing 0.1% TFA, 4 mL/min, monitoring at 254 nm); MS (ES): m/z=558 [M+H]+; 1H NMR (400 MHz, CDCl3) δ ppm 8.32 (1H, d, J=8.03 Hz), 7.65-7.71 (1H, m), 7.50-7.60 (3H, m), 7.41-7.49 (2H, m), 7.39 (1H, dd, J=7.91, 1.63 Hz), 7.23-7.35 (2H, m), 5.59 (1H, d, J=8.03 Hz), 3.51 (3H, s), 2.81 (1H, ddd, J=10.54, 6.90, 3.64 Hz), 2.67-2.76 (1H, m), 2.22-2.33 (3H, m), 1.99-2.12 (3H, m), 1.85-1.94 (1H, m), 1.79 (1H, ddd, J=13.87, 7.84, 3.64 Hz).

Example 1

      To a stirred solution of an 8:1 mixture of Preparation 1K and Preparation 1L (3.46 g, 6.21 mmol) in DMF (25 mL) under nitrogen atmosphere was added ammonium chloride (3.32 g, 62.1 mmol), EDC (3.55 g, 18.52 mmol), HOBT (2.85 g, 18.61 mmol), and triethyl amine (16 mL, 115 mmol) and stirred overnight. The reaction was judged complete by LCMS. The reaction mixture was poured into water (200 mL) with vigorous swirling and then allowed to sit. The solid was collected by filtration, washed with water, allowed to dry to afford 3.6 g colorless solid. The solid was purified by preparative SFC chromatography (Lux-Cellulose-2 (3×25 cm), 8% methanol in CO2, 140 ml/min @220 nm and 35° C.; Sample: 3.6 g in 50 cc methanol, conc.=70 mg/ml, Stack injection: 0.5 cc/9.2 min). Fractions containing product were concentrated, dried overnight under vacuum. Obtained Example 1 (2.74 g, 79%) as a colorless solid (Crystal Form N-1): HPLC: RT=9.601 min (H2O/CH3CN with TFA, Sunfire C18 3.5 um, 4.6×150 mm, 4.6×150 mm, gradient=15 min, wavelength=220 and 254 nm). MS (ES): m/z=557 [M+H]+; 1H NMR (400 MHz, DMSO-d6) δ ppm 9.54 (1H, d, J=7.28 Hz), 7.71-7.80 (1H, m), 7.68 (2H, d, J=8.78 Hz), 7.50-7.62 (3H, m), 7.45 (2H, t, J=7.28 Hz), 7.29-7.40 (2H, m), 7.15 (1H, br. s.), 5.30 (1H, d, J=7.28 Hz), 3.39 (3H, s), 2.74-2.86 (1H, m), 2.02-2.32 (3H, m), 1.45-1.79 (4H, m); [α]D=−107.0° (5.73 mg/mL, DMSO).
      Crystal Form A-2 was prepared by adding approximately 1 mg of Example 1 to approximately 0.7 mL of acetone/acetonitrile/water solution (2:2:1). A mixture of colorless needles and thin blades crystals were obtained after one day of slow evaporation of the solution at room temperature. The thin blade crystals were separated to provide crystal Form A-2.
      Crystal Form EA-3 was prepared by adding approximately 1 mg of Example 1 to approximately 0.7 mL of ethyl acetate/heptane solution (1:1). Colorless blade crystals were obtained after three days of slow evaporation of the solution at room temperature.
      Crystal Form THF-2 was obtained by adding approximately 5 mg of Example 1 to approximately 0.7 mL of THF/water solution (4:1). Colorless blade-like crystals were obtained after one day of solvent evaporation at room temperature.

Alternate Procedure to Make Example 1

Preparation 1M: 3,3,3-Trifluoropropyl trifluoromethanesulfonate

      To a cold (−25° C.), stirred solution of 2,6-lutidine (18.38 mL, 158 mmol) in CH2Cl2 (120 mL) was added Tf2O (24.88 mL, 147 mmol) over 3 min, and stirred for 5 min. To the reaction mixture was added 3,3,3-trifluoropropan-1-ol (12 g, 105 mmol) over an interval of 3 min. After 2 hr, the reaction mixture was warmed to room temperature and stirred for 1 hr. The reaction mixture was concentrated to half volume, then purified by loading directly on silica gel column (330 g ISCO) and eluted with CH2Cl2. Obtained Preparation 1M (13.74 g, 53%) as a colorless oil. 1H NMR (400 MHz, CDCl3) δ ppm 4.71 (2H, t, J=6.15 Hz), 2.49-2.86 (2H, m).

Preparation 1N: (4S)-4-Benzyl-3-(5,5,5-trifluoropentanoyl)-1,3-oxazolidin-2-one

      Preparation 1N was prepared from 5,5,5-trifluoropentanoic acid (3.35 g, 21.46 mmol) and (4S)-4-benzyl-1,3-oxazolidin-2-one (3.80 g, 21.46 mmol) by the general methods shown for Preparation 1B. Preparation 1N (5.67 g, 84%) was obtained as a colorless viscous oil: 1H NMR (400 MHz, CDCl3) δ ppm 7.32-7.39 (2H, m), 7.30 (1H, d, J=7.05 Hz), 7.18-7.25 (2H, m), 4.64-4.74 (1H, m), 4.17-4.27 (2H, m), 3.31 (1H, dd, J=13.35, 3.27 Hz), 3.00-3.11 (2H, m), 2.79 (1H, dd, J=13.35, 9.57 Hz), 2.16-2.28 (2H, m), 1.93-2.04 (2H, m).

Preparation 1O: tert-Butyl (3R)-3-(((4S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl)carbonyl)-6,6,6-trifluorohexanoate

      To a cold (−78° C.), stirred solution of Preparation 1N (3.03 g, 9.61 mmol) in THF (20 mL) was added NaHMDS (1.0M in THF) (10.6 mL, 10.60 mmol) under nitrogen atmosphere. After 2 hours, tert-butyl 2-bromoacetate (5.62 g, 28.8 mmol) was added neat via syringe at −78° C. and stirring was maintained at the same temperature. After 6 hours, the reaction mixture was warmed to room temperature. The reaction mixture was partitioned between saturated NH4Cl and EtOAc. The organic phase was separated, and the aqueous was extracted with EtOAc (3×). The combined organics were washed with brine, dried (Na2SO4), filtered and concentrated under reduced pressure. The residue was purified by flash chromatography (Teledyne ISCO CombiFlash Rf, 5% to 100% solvent A/B=hexanes/EtOAc, REDISEP® SiO2 120 g). Concentration of appropriate fractions provided Preparation 10 (2.79 g, 67.6%) as a colorless viscous oil: 1H NMR (400 MHz, CDCl3) δ ppm 7.34 (2H, d, J=7.30 Hz), 7.24-7.32 (3H, m), 4.62-4.75 (1H, m, J=10.17, 6.89, 3.43, 3.43 Hz), 4.15-4.25 (3H, m), 3.35 (1H, dd, J=13.60, 3.27 Hz), 2.84 (1H, dd, J=16.62, 9.57 Hz), 2.75 (1H, dd, J=13.35, 10.07 Hz), 2.47 (1H, dd, J=16.62, 4.78 Hz), 2.11-2.23 (2H, m), 1.90-2.02 (1H, m), 1.72-1.84 (1H, m), 1.44 (9H, s).

Preparation 1P: (2R)-2-(2-tert-Butoxy-2-oxoethyl)-5,5,5-trifluoropentanoic acid

      Preparation 1P was prepared from Preparation 1O (2.79 g, 6.50 mmol) by the general methods shown for Preparation 1E. Preparation 1P (1.45 g, 83%) was obtained as a colorless oil: 1H NMR (400 MHz, CDCl3) δ ppm 2.83-2.95 (1H, m), 2.62-2.74 (1H, m), 2.45 (1H, dd, J=16.62, 5.79 Hz), 2.15-2.27 (2H, m), 1.88-2.00 (1H, m), 1.75-1.88 (1H, m), 1.45 (9H, s).

Preparation 1E: (2R,3S)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid, and

Preparation 1F: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid

      To a cold (−78° C.), stirred solution of Preparation 1P (5.44 g, 20.13 mmol) in THF (60 mL) was slowly added LDA (24.60 mL, 44.3 mmol) over 7 min. After stirring for 2 hr, Preparation 1M (6.44 g, 26.2 mmol) was added to the reaction mixture over 3 min. After 45 min, the reaction mixture was warmed to −25° C. bath (ice/MeOH/dry ice) for 1 hr, and then warmed to 0° C. After 45 min, Preparation 1M (1 g) was added and the reaction mixture was stirred for 20 min. The reaction was quenched with water and 1N NaOH and was extracted with CH2Cl2. The organic layer was again extracted with 1N NaOH (2×) and the aqueous layers were combined. The aqueous layer was cooled in ice/water bath and then acidified with concentrated HCl to pH 2. Next, the aqueous layer was extracted with EtOAc. The combined organics were washed with brine, dried over anhydrous sodium sulphate, and concentrated under reduced pressure. The residue was dried under high vacuum to provide a 1:5 (1E:1F) mixture (as determined by 1H NMR) of Preparation 1E and Preparation 1F (5.925 g, 80%) as a pale yellow solid. 1H NMR (500 MHz, CDCl3) δ ppm 2.81 (1H, ddd, J=10.17, 6.32, 3.85 Hz), 2.63-2.76 (1H, m), 2.02-2.33 (4H, m), 1.86-1.99 (2H, m), 1.68-1.85 (2H, m), 1.47 (9H, s).

Preparation 1E: (2R,3S)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid, and

Preparation 1F: (2R,3R)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid

      A mixture of Preparation 1E and Preparation 1F (64 mg, 1.758 mmol) was taken in THF (6 mL) to give a colorless solution which was cooled to −78° C. Then, LDA (2.149 mL, 3.87 mmol) (1.8M in heptane/THF/ethylbenzene) was slowly added to the reaction mixture over 10 min. After stirring for 15 min the reaction mixture was placed in a room temperature water bath. After 15 min the reaction mixture was placed back in −78° C. bath and then diethylaluminum chloride (3.87 mL, 3.87 mmol) (1M in hexane) was added slowly over 5 min. The reaction mixture was stirred at −78° C. After 15 min the reaction mixture was placed in a room temperature water bath for 10 min and then cooled back to −78° C. bath. After 15 min the reaction was quenched with MeOH (8 mL, 198 mmol), removed from the −78° C. bath and concentrated. To the reaction mixture was added ice and HCl (16 mL, 16.00 mmol), followed by extraction with EtOAc (2×). The organic layer was washed with potassium fluoride (920 mg, 15.84 mmol) (in 25 mL H2O) and HCl (4.5 mL, 4.50 mmol). The organics were dried over anhydrous magnesium sulphate and concentrated under reduced pressure to provide a 9:1 (1E:1F) enriched mixture of Preparation 1E and Preparation 1F (540 mg, 1.583 mmol, 90% yield) as light yellow/orange solid. 1H NMR (400 MHz, CDCl3) δ ppm 2.64-2.76 (2H, m), 2.04-2.35 (4H, m), 1.88-2.00 (2H, m), 1.71-1.83 (2H, m), 1.48 (9H, s). It was converted to Example 1 by the sequence of reactions as outlined above.

Alternate Procedure to Make Preparation 1E

Preparation 1Q: (2R,3S)-1-Benzyl 4-tert-butyl 2,3-bis(3,3,3-trifluoropropyl)succinate

      A clean and dry 5 L four neck round bottom flask equipped with mechanical stirring, thermometer socket and nitrogen bubbler at room temperature was charged with N,N-dimethyl formamide (2.07 L), a 1.2:1 mixture of Preparation 1E and Preparation 1F (207 g, 0.5651 moles), potassium carbonate (117.1 g, 0.8476 moles) followed by benzyl bromide (116 g, 0.6781 moles) over 15-20 min. The reaction mixture was stirred for 2-3 hr. After completion of the reaction, the reaction mixture was concentrated to dryness at 50-55° C. under vacuum. Ethyl acetate (3.1 L, 30 Vol.) was charged into the concentrated reaction mass and then washed with water (2.07 L), brine (0.6 L) then dried over anhydrous sodium sulfate (207 g), filtered and concentrated to dryness at 40-45° C. under vacuum. The residue was dissolved in dichloromethane (1.035 L, 5 vol.) and then absorbed onto silica gel (60-120) (607 g, 3.0 w/w), then was purified with column chromatography using petroleum ether and ethyl acetate as solvents. After pooling several batches, Preparation 1Q (235 g) was obtained. HPLC purity: 99.77%,

Preparation 1E: (2R,3S)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid

      A clean and dry 2 L autoclave was charged with methanol (540 mL) and was purged with nitrogen for 5-10 minutes. To the autoclave was added 10% palladium on carbon (12 g, 20%), purged with nitrogen once again for 5-10 min then was charged with Preparation 1Q (60 g, 0.1315 moles), the autoclave was flushed with methanol (60 mL) and stirred for 4-6 hr at 20-25° C. under 5 Kg hydrogen pressure. After completion of the reaction, the reaction mass was filtered through CELITE®, washed with methanol (180 mL), dried with anhydrous sodium sulfate (60 g), filtered and concentrated to dryness at 45-50° C. under vacuum. Obtained Preparation 1E (45.8 g, 95%) as a colorless solid: HPLC purity: 98.9%.

Alternate Procedure to Make Preparation 1E

Preparation 1E: (2R,3S)-3-(tert-Butoxycarbonyl)-6,6,6-trifluoro-2-(3,3,3-trifluoropropyl)hexanoic acid

      Preparation 1E was prepared in a procedure identical as above from a mixture of Preparations 1E and 1F (200 g, 0.5460 moles) using LDA (1.8 M solution in THF, ethyl benzene and heptane) (698 mL, 2.3 equiv.) and diethyl aluminum chloride (1.0 M solution in hexane) (1256 mL, 2.3 equiv) in THF (2.0 L). After workup as explained above, the resulting residue was treated as follows: The crude material was added to a 2 L four neck round bottom flask, followed by the addition of MTBE (1.0 L) charged below 30° C. The resulting mixture was stirred for 5-10 minutes to obtain a clear solution. Hexanes (600 mL) was charged to the reaction mixture at a temperature below 30° C. The reaction mixture was stirred for 10 min. Next, tert-butylamine (43.8 g, 1.1 eq) was charged slowly over a period of 15 minutes below 30° C. This addition was observed to be exothermic. The reaction mixture was stirred for 2 hrs below 30° C. and filtered. The solid material was washed with 5:3 MTBE: hexane (200 mL), the filtrate was concentrated and transferred to an amber color bottle. The filtered solid was dissolved in dichloromethane (2.0 L), washed with 1N HCl (2.0), the organic layer was washed with brine (1.0 L×2), then was concentrated under reduced pressure below 45° C. This material was found to be 91.12% pure. The material was repurified by the above t-butylamine crystallization purification procedure. Obtained Preparation 1E (78 g, 39%): HPLC purity: 99.54%.

Alternate Procedure to Make Example 1

Preparation 1I: tert-Butyl (2S,3R)-6,6,6-trifluoro-3-(((3S)-1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoate

      A clean and dry 2 L four neck round bottom flask equipped with mechanical stirring, thermometer socket and nitrogen bubbler was charged with N,N-dimethylformamide (457 mL), Preparation 1E (45.7 g, 0.1248 moles) and Preparation 1G•CSA (62.08 g, 0.1248 moles) under nitrogen atmosphere at 20-25° C. The reaction mixture was stirred for 15-20 minutes to make clear solution at 20-25° C. To the reaction mixture was added TBTU (48.16 g, 0.1498 moles) at 20-25° C. followed by triethylamine (50.51 g, 0.4992 moles) over 15-20 minutes at 20-25° C. The reaction mixture was stirred for 60-120 minutes at 20-25° C. under nitrogen atmosphere. After completion of the reaction, the reaction was quenched into water (1.37L, 30 Vol.) at 20-25° C. under stirring. The reaction mixture was stirred for 30 minutes at 20-25° C. The reaction mixture was filtered and washed with water (228 mL). The resulting solid material was dissolved in ethyl acetate (457 mL), washed with water (2×137 mL), brine (137 mL), and then dried with anhydrous sodium sulfate (45.7 g). Activated charcoal (9.14 g, 20%) was charged into the reaction mixture and stirred for 30 minutes. The mixture was filtered through CELITE® bed and 1 micron filter cloth, washed charcoal bed with ethyl acetate (137 mL), concentrated to 1.0 Vol. stage and then petroleum ether (457 mL, 10 Vol.) was charged and stirred for 30 minutes at 20-25° C. The solid was collected by filtration, washed with petroleum ether (137 mL) and then dried under vacuum at 40-45° C. for 8 hr until loss on drying was less than 3.0%. Obtained Preparation 11 (65.2 g, 85%): HPLC purity: 98.26%.

Preparation 1K: (2S,3R)-6,6,6-Trifluoro-3-(((3S)-1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl)carbamoyl)-2-(3,3,3-trifluoropropyl)hexanoic acid

      A clean and dry 3 L four neck round bottom flask equipped with mechanical stirring, thermometer socket and nitrogen bubbler was charged with dichloromethane (980 mL) under nitrogen atmosphere followed by Preparation 1I (140 g, 0.2282 moles) at 20-25° C. The reaction mixture was cooled to 0-5° C. and trifluoroacetic acid (980 mL) was charged slowly for 30-40 minutes. The resulting mixture was stirred for 2 hr at 0-5° C. under nitrogen atmosphere. The reaction temperature was raised to 20 to 25° C., and the reaction mixture was stirred for 1-2 hr at 20 to 25° C. After completion of the reaction, the reaction mixture was concentrated to dryness at 50 to 55° C. under vacuum. Toluene (3×700 mL,) was charged into the concentrated reaction mass, and then distilled off at 50 to 55° C. under vacuum. After complete concentration from toluene, ethyl acetate (280 mL) was charged into the reaction mass at 20 to 25° C., stirred for 60 minutes, then the solid was collected by filtration, washed with ethyl acetate (140 mL), dried under vacuum at 50 to 55° C. for 12 hr until loss on drying was less than 2.0%. Obtained Preparation 1K (106 g, 84%): HPLC purity: 98.43%.

Example 1

      A reaction vessel was charged with Preparation 1K (30 g, 53.81 mmol), HOBt (8.7 g, 64.38 mmol), and THF (150 mL) at room temperature. To the homogeneous solution was added EDCI (12.4 g, 64.68 mmol), stirred for 15 min, then cooled to 8° C. To the reaction mixture was added ammonia (2M in IPA) (81 mL, 162 mmol) over 5 min so as to maintain a temperature below 10° C. The resulting heavy slurry was stirred for 10 min, warmed to room temperature over 30 min, then stirred for 4 hr. At the completion of the reaction, water (230 mL) was slowly added over 15 min to maintain a temperature below 20° C., and then stirred for 2 hr. The solid was collected by filtration, washed with water (3×60 mL), then dried under vacuum 48 hr at 55° C. The above crude product was charged into a 1 L 3-necked round flask. IPA (200 mL) was added, then heated to 80° C. resulting in a homogeneous solution. Water (170 mL) was slowly added (15 min) to maintain an internal temperature>75° C. The resulting slurry was stirred and cooled to room temperature for 2 hr. The solid was collected by filtration, washed with water (2×50 mL), then dried under vacuum (55° C. for 24 h, and 30° C. for 48 h). Obtained Example 1 (23.4 g, 78% yield): HPLC purity: 99.43%.

PATENTS

US-20150284342-A1

US-20140357605-A1

US-20140100365-A1

Clip

For some disease targets, an indirect approach may be best. Or so Ashvinikumar V. Gavai and his colleagues atBristol-Myers Squibbfound in their quest toward a potential cancer drug. Gavai unveiled BMS-906024, which is an experimental—and slightly roundabout—treatment for a number of cancers, including breast, lung, and colon cancers, and leukemia.

Cancers have a tendency to relapse or to become resistant to treatments that once worked. Research at BMS and elsewhere had suggested that a family of proteins called Notch is implicated in that resistance and in cancer progression more generally. Gavai, director of oncology chemistry at BMS in Princeton, N.J., and his team set out to block Notch family signaling.

Notch family members lack enzymatic activity, so blocking them directly is difficult. Instead, BMS developed inhibitors of an enzyme that is essential for activating Notch signaling—γ-secretase.

09116-cover-bms906024

Company: Bristol-Myers Squibb

Target: pan-Notch

Disease: breast, lung, colon cancer; leukemia

Interfering with Notch, even in this indirect way, can have detrimental effects on the gastrointestinal tract. Only two of the four Notch family members are linked to that side effect, Gavai says. But he and his team think their drug will be most effective if it acts on all four family members roughly equally—a so-called pan-Notch inhibitor. By selecting a molecule that’s well tolerated in animals and carefully scheduling doses of the drug in humans, it could be possible to minimize side effects, he says.

The BMS team relied on Notch signaling assays in leukemia and breast cancer cell lines to find leads. They soon learned that for their molecules to work, three chiral centers had to be in the S,R,Sconfiguration. After that, they strove to make the molecules last in the bloodstream. They removed an isobutyl group and tweaked some other parts of their candidate’s succinamide side chain. It was tough to retain both a long half-life and activity against Notch, Gavai told C&EN. “You’d optimize one and lose the other.”

His team threaded the needle with BMS-906024. Their studies with mice suggest that a dose of 4–6 mg once a week could be effective in people. That’s lower than doses being tested for other Notch-targeted agents, according to the website clinicaltrials.gov. The mouse studies also back the idea that Notch is involved in cancer drug resistance and suggest that Notch could be a target for taking on cancer stem cells, which are notoriously resistant to chemotherapy.

BMS-906024 is in Phase I clinical trials, both alone and in combination with other agents. Patients with colon, lung, breast, and other cancers are receiving intravenous doses of the compound to determine its safety and optimum dose ranges.

09116-cover-BMScxd

(From left, front row) Gavai, Weifeng Shan, (second row) Aaron Balog, Patrice Gill, Gregory Vite, (third row) Francis Lee, Claude Quesnelle, (rear row) Wen-Ching Han, Richard Westhouse.
Credit: Catherine Stroud Photography

http://cen.acs.org/articles/91/i16/BMS-906024-Notch-Signaling-Inhibitor.html

Image result for BMS 906024 synthesis

clip

Image result for BMS 906024

BMS-906024
Company: Bristol-Myers Squibb
Meant to treat: cancers including breast, lung, colon, and leukemia
Mode of action: pan-Notch inhibitor
Medicinal chemistry tidbit: The BMS team used an oxidative enolate heterocoupling en route to the candidate– a procedure from Phil Baran’s lab at Scripps Research Institute. JACS 130, 11546
Status in the pipeline: Phase I
Relevant documents: WO 2012/129353

PAPER

Abstract Image

An enantioselective synthesis of (S)-7-amino-5H,7H-dibenzo[b,d]azepin-6-one (S1) is described. The key step in the sequence involved crystallization-induced dynamic resolution (CIDR) of compound 7 using Boc-d-phenylalanine as a chiral resolving agent and 3,5-dichlorosalicylaldehyde as a racemization catalyst to afford S1 in 81% overall yield with 98.5% enantiomeric excess.

Crystallization-Induced Dynamic Resolution toward the Synthesis of (S)-7-Amino-5H,7H-dibenzo[b,d]-azepin-6-one: An Important Scaffold for γ-Secretase Inhibitors

Department of Discovery Synthesis, Biocon Bristol-Myers Squibb Research Centre, Biocon Park, Bommasandra IV Phase, Jigani Link Road, Bengaluru 560099, India
Bristol-Myers Squibb Company, P.O Box 4000, Princeton, New Jersey 08543-4000, United States
Org. Process Res. Dev., Article ASAP
 1. Quesnelle, Claude; Kim, Soong-Hoon; Lee, Francis; Gavai, Ashvinikumar. Bis(fluoroalkyl)-1,4-benzodiazepinone compounds as Notch receptor inhibitors and their preparation and use in the treatment of cancer. PCT Int. Appl. (2012), WO 2012129353 A1 20120927.
Patent ID Date Patent Title
US2016060232 2016-03-03 BIS(FLUOROALKYL)-1, 4-BENZODIAZEPINONE COMPOUNDS
US2016022723 2016-01-28 COMBINATION THERAPY FOR THE TREATMENT OF PROLIFERATIVE DISEASES
US2016008316 2016-01-14 USE OF DIANHYDROGALACTITOL AND ANALOGS OR DERIVATIVES THEREOF IN COMBINATION WITH PLATINUM-CONTAINING ANTINEOPLASTIC AGENTS TO TREAT NON-SMALL-CELL CARCINOMA OF THE LUNG AND BRAIN METASTASES
US2016009785 2016-01-14 NOVEL FUSION MOLECULES AND USES THEREOF
US2015284342 2015-10-08 BIS(FLUOROALKYL)-1, 4-BENZODIAZEPINONE COMPOUNDS
US2015232491 2015-08-20 PRODRUGS OF 1, 4-BENZODIAZEPINONE COMPOUNDS
US8968741 2015-03-03 Anti-CD22 antibodies and immunoconjugates and methods of use
US2014357605 2014-12-04 BIS(FLUOROALKYL)-1, 4-BENZODIAZEPINONE COMPOUNDS
US8822454 2014-09-02 Bisfluoroalkyl-1, 4-benzodiazepinone compounds
US8629136 2014-01-14 Bisfluoroalkyl-1, 4-benzodiazepinone compounds
BMS-906024
BMS-906024.svg
Systematic (IUPAC) name
(2R,3S)-N-[(3S)-1-Methyl-2-oxo-5-phenyl-2,3-dihydro-1H-1,4-benzodiazepin-3-yl]-2,3-bis(3,3,3-trifluoropropyl)succinamide
Identifiers
PubChem CID 66550890
ChemSpider 28536138
Chemical data
Formula C26H26F6N4O3
Molar mass 556.500 g/mol

///////////////3,5-dichlorosalicylaldehyde, Alzheimer’s disease, Boc-D-phenylalanine, CIDR;dibenzoazepenone DKR; Notch inhibitorsNotch inhibitor, SAR T-acute lymphoblastic leukemia, triple-negative breast cancer, γ-secretase inhibitor, PHASE 1, BMS, Bristol-Myers Squibb, 1401066-79-2, Ashvinikumar Gavai

CN1c2ccccc2C(=N[C@@H](C1=O)NC(=O)[C@H](CCC(F)(F)F)[C@H](CCC(F)(F)F)C(=O)N)c3ccccc3

Image result for γ-Secretase Inhibitors BMS

Patent US8377886 – Use of gamma secretase inhibitors and notch …

www.google.com

Figure US08377886-20130219-C00003. gamma secretase inhibitor

Image result for γ-Secretase Inhibitors BMS

RO4929097 | γ-secretase inhibitor – Cellagen Technology

www.cellagentech.com

RO4929097 | γ-secretase inhibitor
Image result for γ-Secretase Inhibitors BMS

MCC 950


Image result for MCC950

MCC 950

256373-96-3 (sodium salt); 210826-40-7 (free form).

MCC950; CP-456773; CAS 210826-40-7; DSSTox_CID_27301; DSSTox_RID_82252; DSSTox_GSID_47301;

CP-456,773; CRID3

1-(1,2,3,5,6,7-hexahydro-s-indacen-4-yl)-3-[4-(2-hydroxypropan-2-yl)furan-2-yl]sulfonylurea

C20H24N2O5S
Molecular Weight: 404.47996 g/mol

CP-456773, also known as MCC950 and CRID3, is a potent and selective cytokine release inhibitor and NLRP3 inflammasome inhibitor for the treatment of inflammatory diseases. CP-456773 inhibits interleukin 1β (IL-1β) secretion and caspase 1 processing. MCC950 blocked canonical and noncanonical NLRP3 activation at nanomolar concentrations. MCC950 specifically inhibited activation of NLRP3 but not the AIM2, NLRC4 or NLRP1 inflammasomes. MCC950 reduced interleukin-1β (IL-1β) production in vivo and attenuated the severity of experimental autoimmune encephalomyelitis (EAE), a disease model of multiple sclerosis. MCC950 is a potential therapeutic for NLRP3-associated syndromes, including autoinflammatory and autoimmune diseases, and a tool for further study of the NLRP3 inflammasome in human health and disease.

Image result for MCC950

Formula C20H23N2NaO5S
MW 426.5
CAS 256373-96-3

sodium ((1,2,3,5,6,7-hexahydro-s-indacen-4-yl)carbamoyl)((4-(2-hydroxypropan-2-yl)furan-2-yl)sulfonyl)amide

Image result for MCC950

PAPER

Identification, Synthesis, and Biological Evaluation of the Major Human Metabolite of NLRP3 Inflammasome Inhibitor MCC950

Institute for Molecular Bioscience, The University of Queensland, Brisbane, Queensland 4072, Australia
School of Chemistry and Molecular Biosciences, The University of Queensland, Brisbane, Queensland 4072, Australia
ACS Med. Chem. Lett., Article ASAP
DOI: 10.1021/acsmedchemlett.6b00198
*E-mail: uqarob15@uq.edu.au. Fax: +61-7-3346-2090. Phone: +61-7-3346-2204., *E-mail: m.cooper@uq.edu.au. Fax: +61-7-3346-2090. Phone: +61-7-3346-2044.

Abstract

Abstract Image

MCC950 is an orally bioavailable small molecule inhibitor of the NOD-like receptor pyrin domain-containing protein 3 (NLRP3) inflammasome that exhibits remarkable activity in multiple models of inflammatory disease. Incubation of MCC950 with human liver microsomes, and subsequent analysis by HPLC–MS/MS, revealed a major metabolite, where hydroxylation of MCC950 had occurred on the 1,2,3,5,6,7-hexahydro-s-indacene moiety. Three possible regioisomers were synthesized, and coelution using HPLC–MS/MS confirmed the structure of the metabolite. Further synthesis of individual enantiomers and coelution studies using a chiral column in HPLC–MS/MS showed the metabolite was R-(+)- N-((1-hydroxy-1,2,3,5,6,7-hexahydro-s-indacen-4-yl)carbamoyl)-4-(2-hydroxypropan-2-yl)furan-2-sulfonamide (2a). Incubation of MCC950 with a panel of cytochrome P450 enzymes showed P450s 2A6, 2C9, 2C18, 2C19, 2J2, and 3A4 catalyze the formation of the major metabolite 2a, with a lower level of activity shown by P450s 1A2 and 2B6. All of the synthesized compounds were tested for inhibition of NLRP3-induced production of the pro-inflammatory cytokine IL-1β from human monocyte derived macrophages. The identified metabolite 2a was 170-fold less potent than MCC950, while one regioisomer had nanomolar inhibitory activity. These findings also give first insight into the SAR of the hexahydroindacene moiety.

str1

PATENT

WO 2001019390

http://www.google.co.in/patents/WO2001019390A1?cl=en

Synthesis of precursors will be update soon……………


Novel synthesis of 1-(1,2,3,5,6,7-hexahydro-s-indacen-4-yl)-3-[4-(1-hydroxy-1-methylethyl)furan-2-sulfonyl]urea, an antiinflammatory agent
PAPER

Synthetic Communications (2003), 33, (12), 2029-2043.

http://dx.doi.org/10.1081/SCC-120021029

A novel synthesis of the anti-inflammatory agent 1-(1,2,3,5,6,7- hexahydro-s-indacen-4-yl)-3-[4-(1-hydroxy-1-methyl-ethyl)-furan-2-sulfonyl] urea 1 is described. Sulfonamide 5 was prepared starting from ethyl 3-furoate 2. Key steps were a one-pot sulfonylation with chlorosulfonic acid in methylene chloride followed by pyridinium salt formation and reaction with phosphorus pentachloride to provide ethyl 2-(chlorosulfonyl)-4-furoate 7. This sulfonyl chloride was treated with ammonium bicarbonate to form sulfonamide 8, followed by treatment with excess methyl magnesium chloride to provide 4-(1-hydroxy-1-methyl-ethyl)-furan-2-sulfonamide 5. 4-Isocyanato-1,2,3,5,6,7-hexahydro-s-indacene 16 was prepared from indan in five steps. The formation of the desired sulfonyl urea was carried out both with the isolated isocyanate 16 and via an in situ method.

1-(1,2,3,5,6,7-Hexahydro-s-indacen-4-yl)-3-[4-(1-hydroxy-1-methylethyl)-furan-2-sulfonylurea 1 has been in development for treatment of inflammation. [1] The synthetic route to furan sulfonamide 5 used by its discoverer Mark Dombroski in Medicinal Chemistry is shown in Sch. 1. The starting material was ethyl 3-furoate 2. This was treated with excess methyl magnesium chloride to provide the 3-furanyl-tertiary alcohol 3. Furan alcohol 3 was deprotonated with methyl lithium followed by s-butyl lithium at low temperature and reacted with liquid sulfur dioxide to generate sulfinic acid 4. Without isolation, sulfinic acid 4 was oxidized to sulfonamide 5 with hydroxylamine O-sulfinic acid via a procedure described by workers at Merck.[2] We were interested in finding a synthesis of furan sulfonamide 5 and its conversion to sulfonylurea 1 that would be suitable for scale up. In this article, we describe the discovery of a better bulk process to sulfonamide 5 from the same starting material and a procedure to form the desired sulfonylurea without isolating the isocyanate of 4-amino-1,2,3,5,6,7-hexahydro-s-indacene.

1-(1,2,3,5,6,7-Hexahydro-s-indacen-4-yl)-3-[4-(1-hydroxy- 1-methyl-ethyl)-furan-2-sulfonyl Urea (1) ………….. anhydrous sodium salt weighed 4.9 g. mp 239 C. 1 H NMR (D2O, 400 MHz) 7.35 (s, 1), 6.81 (s, 1), 6.65 (s, 1), 2.53 (m, 4), 2.41 (m, 4), 1.73 (m, 4), 1.31 (s, 6). 13C NMR (D2O, 100 MHz) 159.87, 151.82, 143.89, 140.49, 138.77, 134.87, 129.58, 118.38, 112.02, 68.24, 32.67, 30.10, 29.53, 25.34. Anal. calcd. for C20H23N2O5SNa: C, 56.33; H, 5.44; N, 6.57; S, 7.52. Found: C, 56.19; H, 5.40; N, 6.34; S, 7.42. N

CLIPS

Image result for MCC950

Dr Rebecca Coll, PostDoctoral Researcher, Inflammasome Lab, UQ Fellow

Rebecca completed her PhD research under Prof. Luke O’Neill in Trinity College Dublin at one of the leading laboratories in the innate immunity field. For her work on the regulation of TLR signalling she received the International Endotoxin and Innate Immunity Society Young Investigator Award in 2012. However, her main research focus has been inflammasomes and their therapeutic targeting by small molecule drugs. Her recent first author publication on MCC950 in Nature Medicine has been widely acclaimed (the subject of seven commentaries in leading journals and attention from 24 international news outlets) and is already a highly cited paper. She joined the Schroder group in May 2014 with the goal of defining the molecular target of MCC950 as part of a broader collaboration between the Schroder, Cooper and O’Neill labs.

Email: r.coll@imb.uq.edu.au

Office Telephone: +61 7 3346 2351

Lab Telephone: +61 7 3346 2071

Institute for Molecular Bioscience

Google Scholar

Research Gate

Researcher ID

A collaboration between scientists from Dublin’s Trinity College (Ireland) and the University of Queensland (Australia) identified a compound able to inhibit an inflammatory process common to many diseases, including Alzheimer’s disease. The study entitled “A small-molecule inhibitor of the NLRP3 inflammasome for the treatment of inflammatory diseases” was published on line in the journal Nature Medicine.

Pathogenesis of several diseases, including Alzheimer’s, have a strong inflammatory component. Inflammatory processes can be triggered by molecules of the NOD-like receptor (NLR) family such as NLRP3. Once activated, this molecule leads to a cascade of events known as the NLRP3 inflammasome that ultimately causes the production of inflammatory factors. Aberrant activation of NLRP3 is responsible for increased inflammatory responses in complex diseases such as multiple sclerosis, Muckle-Wells syndrome, type 2 diabetes, Alzheimer’s disease and atherosclerosis.

Targeting this molecule can overcome the side effects of other anti-inflammatory drugs commonly used: “Drugs like aspirin or steroids can work in several diseases, but can have side effects or be ineffective. What we have found is a potentially transformative medicine, which targets what appears to be the common disease-causing process in a myriad of inflammatory diseases,” said Luke A J O’Neill, one of the team leaders.

Previous studies identified NLRP3 inhibitors, though neither very potent nor specific. This research team now identified a specific inhibitor of NLRP3 inflammasome, the molecule MCC950. They observed that it inhibits NLRP3 in mouse models of multiple sclerosis with consequent attenuation of disease progression. MCC950 also blocks production of inflammatory factors in blood samples from patients with a severe inflammatory disorder, Muckle-Wells syndrome. These results demonstrated the pharmaceutical potential of this specific NLRP3 inhibitor.

“MCC950 is blocking what was suspected to be a key process in inflammation. There is huge interest in NLRP3 both among medical researchers and pharmaceutical companies and we feel our work makes a significant contribution to the efforts to find new medicines to limit it,” said Rebecca Coll, the paper’s first author.

The researchers were able to demonstrate the potential of MCC950 in multiple sclerosis, an inflammatory disease of the central nervous system (CNS). However, the target for MCC950 is strongly implicated in other diseases of the CNS such as Alzheimer’s and Parkinson’s diseases indicating that it has the potential to treat all of these conditions. The fact that MCC950 can be orally administered further enhances the potential of this molecule as a therapeutic drug.

“MCC950 is able to be given orally and will be cheaper to produce than current protein-based treatments, which are given daily, weekly, or monthly by injection. Importantly, it will also have a shorter duration in the body, allowing clinicians to stop the anti-inflammatory action of the drug if the patient ever needed to switch their immune response back to 100% in order to clear an infection.” said Matt Cooper, chemist and also co-senior author in this study.

REFERENCES

1: Shao BZ, Xu ZQ, Han BZ, Su DF, Liu C. NLRP3 inflammasome and its inhibitors: a review. Front Pharmacol. 2015 Nov 5;6:262. doi: 10.3389/fphar.2015.00262. eCollection 2015. Review. PubMed PMID: 26594174; PubMed Central PMCID: PMC4633676.

2: Baker PJ, Boucher D, Bierschenk D, Tebartz C, Whitney PG, D’Silva DB, Tanzer MC, Monteleone M, Robertson AA, Cooper MA, Alvarez-Diaz S, Herold MJ, Bedoui S, Schroder K, Masters SL. NLRP3 inflammasome activation downstream of cytoplasmic LPS recognition by both caspase-4 and caspase-5. Eur J Immunol. 2015 Oct;45(10):2918-26. doi: 10.1002/eji.201545655. Epub 2015 Aug 24. PubMed PMID: 26173988.

3: Krishnan SM, Dowling JK, Ling YH, Diep H, Chan CT, Ferens D, Kett MM, Pinar A, Samuel CS, Vinh A, Arumugam TV, Hewitson TD, Kemp-Harper BK, Robertson AA, Cooper MA, Latz E, Mansell A, Sobey CG, Drummond GR. Inflammasome activity is essential for one kidney/deoxycorticosterone acetate/salt-induced hypertension in mice. Br J Pharmacol. 2016 Feb;173(4):752-65. doi: 10.1111/bph.13230. Epub 2015 Jul 31. PubMed PMID: 26103560; PubMed Central PMCID: PMC4742291.

4: Groß CJ, Groß O. The Nlrp3 inflammasome admits defeat. Trends Immunol. 2015 Jun;36(6):323-4. doi: 10.1016/j.it.2015.05.001. Epub 2015 May 16. PubMed PMID: 25991463.

5: Coll RC, Robertson AA, Chae JJ, Higgins SC, Muñoz-Planillo R, Inserra MC, Vetter I, Dungan LS, Monks BG, Stutz A, Croker DE, Butler MS, Haneklaus M, Sutton CE, Núñez G, Latz E, Kastner DL, Mills KH, Masters SL, Schroder K, Cooper MA, O’Neill LA. A small-molecule inhibitor of the NLRP3 inflammasome for the treatment of inflammatory diseases. Nat Med. 2015 Mar;21(3):248-55. doi: 10.1038/nm.3806. Epub 2015 Feb 16. PubMed PMID: 25686105; PubMed Central PMCID: PMC4392179.

Patent ID Date Patent Title
US2016008420 2016-01-14 Treatment Of HIV-1 Infection And AIDS
US2015343011 2015-12-03 Treatment Of HIV-1 Infection And AIDS
US2005064519 2005-03-24 Methods of using GST-Omega-2
US2003143230 2003-07-31 Combination of an IL-1/18 inhibitor with a TNF inhibitor for the treatment of inflammation
EP0964849 2003-06-04 SULFONYL UREA DERIVATIVES AND THEIR USE IN THE CONTROL OF INTERLEUKIN-1 ACTIVITY
US6433009 2002-08-13 Sulfonyl urea derivatives and their use in the control of interleukin-1 activity
US6166064 2000-12-26 Sulfonyl urea derivatives and their use in the control of interleukin-1 activity
US6022984 2000-02-08 Efficient synthesis of furan sulfonamide compounds useful in the synthesis of new IL-1 inhibitors
EP0976742 2000-02-02 A synthesis of furan sulfonamide compounds useful in the synthesis of IL-1 inhibitors
WO9832733 1998-07-30 SULFONYL UREA DERIVATIVES AND THEIR USE IN THE CONTROL OF INTERLEUKIN-1 ACTIVITY

/////////cytochrome P450, inflammasome, MCC950, metabolite, microsome NLRP3MCC950, CP-456,773,  CRID3, 256373-96-3,  210826-40-7 , 

CC(C)(C1=COC(=C1)S(=O)(=O)NC(=O)NC2=C3CCCC3=CC4=C2CCC4)O

BMT-145027


str2

BMT-145027

CAS ?

MF C23H14ClF3N4
MW: 438.0859

3-(4-chloro-3-(trifluoromethyl)phenyl)-4-cyclopropyl-6-phenyl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile

3-(4-chloro-3- (trifluoromethyl)phenyl)-4-cyclopropyl-6-phenyl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile

1H NMR (600 MHz, DMSO-d6) δ = 14.46 (br. s., 1H), 8.24 (s, 1H), 8.14 (d, J=8.1 Hz, 1H), 7.88 (d, J=8.3 Hz, 1H), 7.84 (dd, J=6.1, 2.7 Hz, 2H), 7.61 – 7.55 (m, 3H), 2.50 – 2.45 (m, 1H), 0.74 – 0.68 (m, 2H), 0.65 – 0.59 (m, 2H).

13C NMR (126 MHz, DMSO-d6) δ 160.5, 155.0, 153.0, 144.1, 138.3, 135.4, 133.9, 132.0, 131.2, 130.3, 129.7, 128.9, 128.9, 128.8, 127.0 (q, J=30.5 Hz), 118.1, 112.4, 103.9, 14.6, 9.4.

LCMS (method A) tR, 2.01 min, MS Anal. Calcd. for [M+H]+ C23H15ClF3N4: 439.09; found: 439.15.

LC/MS HPLC methods: method A: Column: Phenomenex Luna 30 x 2.0 mm 3um; Mobile Phase A: 10:90 acetonitrile:water with 0.1% TFA; Mobile Phase B: 90:10 acetonitrile:water with 0.1% TFA; Temperature: 40 °C; Gradient: 0-100% B over 2 min; Flow: 1 mL/min.

DETAILS WILL BE UPDATED…………

Image result for Bristol-Myers Squibbimg

Senior Research Investigator II at Bristol-Myers Squibb

Highly effective leader seeking to apply innovative thinking and critical analysis to strategy and scientific challenges. Diverse educational background, including recent MBA studies, provides foundation for excellent communication, collaboration, and team building across organizational functions. Experience includes 13 years of cutting-edge scientific research in a global work environment, specializing in the fields of organic chemistry and drug discovery.

Experience

Senior Research Investigator II

Bristol-Myers Squibb

July 2014 – Present (2 years 4 months)Wallingford, CT

Oncology Discovery Chemistry, Program: Bromodomain and Extra-Terminal Inhibitor Program, undisclosed target

 

 

BMT-145027 is a potent mGluR5 PAM with no inherent mGluR5 agonist activity. BMT-145027 is a non-MPEP site PAM to demonstrate in vivo efficacy. BMT-145027 has mGluR5 PAM EC50 = 47 nM, with fold shit = 3.5, and is effective in mouse NOR. The metabotropic glutamate receptor 5 (mGluR5) is an attractive target for the treatment of schizophrenia due to its role in regulating glutamatergic signaling in association with the N-methyl-D-aspartate receptor (NMDAR).

Abstract Image

The metabotropic glutamate receptor 5 (mGluR5) is an attractive target for the treatment of schizophrenia due to its role in regulating glutamatergic signaling in association with the N-methyl-d-aspartate receptor (NMDAR). We describe the synthesis of 1H-pyrazolo[3,4-b]pyridines and their utility as mGluR5 positive allosteric modulators (PAMs) without inherent agonist activity. A facile and convergent synthetic route provided access to a structurally diverse set of analogues that contain neither the aryl-acetylene-aryl nor aryl-methyleneoxy-aryl elements, the predominant structural motifs described in the literature. Binding studies suggest that members of our new chemotype do not engage the receptor at the MPEP and CPPHA mGluR5 allosteric sites. SAR studies culminated in the first non-MPEP site PAM, 1H-pyrazolo[3,4-b]pyridine 31 (BMT-145027), to improve cognition in a preclinical rodent model of learning and memory.

Development of 1H-Pyrazolo[3,4-b]pyridines as Metabotropic Glutamate Receptor 5 Positive Allosteric Modulators

Matthew D. Hill*, Haiquan Fang, Jeffrey M. Brown, Thaddeus Molski, Amy Easton, Xiaojun Han, Regina Miller, Melissa Hill-Drzewi, Lizbeth Gallagher, Michele Matchett, Michael Gulianello, Anand Balakrishnan, Robert L. Bertekap, Kenneth S. Santone, Valerie J. Whiterock, Xiaoliang Zhuo, Joanne J. Bronson, John E. Macor, and Andrew P. Degnan
Research and Development, Bristol-Myers Squibb, 5 Research Parkway, Wallingford, Connecticut 06492-7660, United States
ACS Med. Chem. Lett., Article ASAP
DOI: 10.1021/acsmedchemlett.6b00292, http://pubs.acs.org/doi/abs/10.1021/acsmedchemlett.6b00292

*Tel: 1-203-677-7102. Fax: 1-203-677-7884. E-mail: matthew.hill@bms.com.

Image result for Bristol-Myers Squibb

SIMILAR STR

str1

1929593-12-3
C23 H15 F3 N4, 404.39
1H-Pyrazolo[3,4-b]pyridine-5-carbonitrile, 4-cyclopropyl-6-phenyl-3-[4-(trifluoromethyl)phenyl]-
A Multicomponent Approach to Highly Substituted 1H-Pyrazolo[3,4-b]pyridines
Synthesis (2016), 48, (14), 2201-2204.

A Multicomponent Approach to Highly Substituted 1H-Pyrazolo[3,4-b]pyridines

Matthew D. Hill*

  • Bristol-Myers Squibb Research and Development, 5 Research Parkway, Wallingford, CT 06492-7660, USA   Email:matthew.hill@bms.com

DOI: 10.1055/s-0035-1562230

Compound 12 (500 mg, 65% yield: 1H NMR (500 MHz, DMSO-d6 δ 14.41 (br. s., 1H, 7.86 – 7.80 (m, 3H, 7.76 (dt, J=7.1, 1.6 Hz, 1H, 7.61 – 7.51 (m, 5H, 2.48 – 2.45 (m, 1H, 0.73 – 0.66 (m, 2H, 0.62 – 0.57 (m, 2H. 13C NMR (400 MHz, DMSO-d6 δ 159.98, 154.67, 152.15, 144.68, 137.75, 135.74, 132.69, 129.87, 129.71, 129.14, 128.99, 128.34, 128.24, 128.21, 117.61, 111.88, 103.05, 14.01, 8.75. IR (film: 3228 (s, 3052 (w, 2228 (m, 1581 (s, 1555 (s, 1503 (w, 1447 (m, 1284 (m cm–1. HRMS (ESI: m/z [M+H]+ calcd for C22H16N4Cl: 371.1058; found: 371.1053.

Compound 13 (103 mg, 28% yield: 1H NMR (500 MHz, DMSO-d6 δ 14.50 (br. s., 1H, 8.03 (d, J=7.9 Hz, 2H, 7.92 – 7.80 (m, 4H, 7.63 – 7.55 (m, 3H, 2.51 (br. s., 1H, 0.65 (d, J=7.6 Hz, 2H, 0.56 (d, J=4.3 Hz, 2H. MS (ESI: m/z = 405.15 [M+H]+.

 

 

///////////BMT-145027, glutamat mGluR5 novel object recognition positive allosteric modulator,  schizophrenia

c1(c(c(c2c(n1)nnc2c3ccc(c(c3)C(F)(F)F)Cl)C4CC4)C#N)c5ccccc5

ClC(C=C1)=C(C(F)(F)F)C=C1C2=NNC3=C2C(C4CC4)=C(C#N)C(C5=CC=CC=C5)=N3

GDUFA: FDA’s new Guidance on Self-Identification of Generic Drug Manufacturers


Image result for Generic Drug User Fee Amendments

GDUFA: FDA’s new Guidance on Self-Identification of Generic Drug Manufacturers

FDA’s new Guidance requesting generic drug manufacturers who want to export to the USA to self-identify has recently been published in a finalised form. Read more here about what types of generic drug manufacturers are affected and which company data are required by the FDA.

http://www.gmp-compliance.org/enews_05598_GDUFA-FDA-s-new-Guidance-on-Self-Identification-of-Generic-Drug-Manufacturers_15332,S-RGL_n.html

 

The GDUFA (Generic Drug User Fee Amendments) is a legislative package which came into force in 2012 and entitles the US-American FDA to collect fees from generic drug manufacturers, who strive for a marketing authorisation for the American market. An annual fee has to be paid after the successful registration.

The core of the document is the obligation to “Self-Identify” for those companies that have to submit essential site-related information to the FDA. The details of this self-identification are set in a Guidance for Industry entitled “Self-Identification of Generic Drug Facilities, Sites, and Organizations” published on 22 September 2016 by the FDA in the finalised form.

The Guidance describes the following elements:

1. Which types of generic facilities, sites, and organizations are required to self-identify?

2. What information is requested?

3. What technical standards are to be used for electronically submitting the requested information?

4. What is the penalty for failing to self-identify?

Hereinafter, you will find a short summary of these four topics:

1. Companies that manufacture finished generic medicinal products for human use or the APIs for them, or both are required to self-identify as well as companies that package the finished generic drug into the primary container and label it. Besides, sites that – pursuant to a contract with the applicant (generic drug manufacturer) – repack/redistribute the finished drug from a primary container  into a different primary container are also required to submit a self-identification as well as sites that perform bioequivalence/bioavailability studies. Last but not least, the obligation to self-identify also concerns sites that are listed in the application dossier as contract laboratories for the sampling and performing of analytical testing.

2. Essential data are: the D-U-N-S number (a unique nine-digit sequence specific for each site / each distinct physical location of an entity), the “Facility Establishment Identifier, FEI” (an identifier used by the FDA for the planning and tracking of inspections) and general information with regard to the facility (company owner, type of business operation, contact data, information about the manufacture of non generic drugs).

3. The HLS standard (Health Level Seven Structured Product Labeling) requested for generic applications (ANDAs)  has to be also used for the submission of self-identification information. A detailed description of this standard can be found in the Guidance “Providing Regulatory Submissions in Electronic Format – Drug Establishment Registration and Drug Listing“.

4. Companies that fail to self-identify do not have to expect an explicit penalty. However, such a failure leads to two drawbacks: first, the likelihood of a site inspection by the FDA prior to approval is higher. The second drawback which is much more serious is that all the APIs or finished drugs from a manufacturer who hasn’t self-identified are deemed misbranded. For the FDA, such products are not allowed for importation in the USA.

To the satisfaction of the FDA, the regulations set in the GDUFA and the provisions laid down in the new Guidance represent a major contribution to an enhanced transparency in particular of complex supply chains.

 

//////////GDUFA, FDA,  new Guidance,  Self-Identification, Generic Drug Manufacturers

Glecaprevir (ABT-493)


Image result for Glecaprevir

2D chemical structure of 1365970-03-1

ChemSpider 2D Image | Glecaprevir | C38H46F4N6O9S

str1

Glecaprevir (ABT-493), A-1282576.0

(3aR,7S,10S,12R,21E,24aR)-7-tert-butyl-N-((1R,2R)-2-(difluoromethyl)-1-((1-methylcyclopropane-1-sulfonyl)carbamoyl)cyclopropyl)-20,20-difluoro-5,8-dioxo-2,3,3a,5,6,7,8,11,12,20,23,24a-dodecahydro-1H,10H-9,12-methanocyclopenta(18,19)(1,10,17,3,6)trioxadiazacyclononadecino(11,12-b)quinoxaline-10-carboxamide

Cyclopropanecarboxamide, N-((((1R,2R)-2-((4,4-difluoro-4-(3-hydroxy-2-quinoxalinyl)-2-buten-1-yl)oxy)cyclopentyl)oxy)carbonyl)-3-methyl-L-valyl-(4R)-4-hydroxy-L-prolyl-1-amino-2-(difluoromethyl)-N-((1-methylcyclopropyl)sulfonyl)-, cyclic (1->2)-ether, (1R,2R)-
CAS RN: 1365970-03-1
UNII: K6BUU8J72P

Molecular Formula, C38-H46-F4-N6-O9-S

Molecular Weight, 838.8724

Classification Code, Treatment of Chronic Hepatitis C Infection

(1R,14E,18R,22R,26S,29S)-N-[(1R,2R)-2-(Difluormethyl)-1-{[(1-methylcyclopropyl)sulfonyl]carbamoyl}cyclopropyl]-13,13-difluor-26-(2-methyl-2-propanyl)-24,27-dioxo-2,17,23-trioxa-4,11,25,28-tetraazapent ;acyclo[26.2.1.03,12.05,10.018,22]hentriaconta-3,5(10),6,8,11,14-hexaen-29-carboxamid
(1R,14E,18R,22R,26S,29S)-N-[(1R,2R)-2-(Difluoromethyl)-1-{[(1-methylcyclopropyl)sulfonyl]carbamoyl}cyclopropyl]-13,13-difluoro-26-(2-methyl-2-propanyl)-24,27-dioxo-2,17,23-trioxa-4,11,25,28-tetraazape ;ntacyclo[26.2.1.03,12.05,10.018,22]hentriaconta-3,5(10),6,8,11,14-hexaene-29-carboxamide
Class Antivirals (small molecules)
Mechanism Of Action Hepatitis C virus NS3 protein inhibitors
Who Atc Codes J05A-E (Protease inhibitors)
Ephmra Codes J5B1 (Viral hepatitis products)
Indication Hepatitis C, Renal Impairment, Hepatic impairment
  • Originator AbbVie; Enanta Pharmaceuticals
  • Developer AbbVie
  • Class Antivirals; Aza compounds; Cyclic ethers; Cyclopentanes; Cyclopropanes; Quinoxalines; Small molecules
  • Mechanism of Action Hepatitis C virus NS3 protein inhibitors
  • Phase II Hepatitis C

Most Recent Events

  • 18 Apr 2016 Pooled efficacy and adverse event data from the phase II SURVEYOR-I and SURVEYOR-2 trials for Hepatitis C presented at The International Liver Congress™ 2016 (ILC-2016)
  • 15 Apr 2016 Updated efficacy data from a phase II MAGELLAN 1 study were reported by Enanta Pharmaceuticals
  • 15 Apr 2016 Updated safety and efficacy data from a phase II MAGELLAN 1 study were presented at the International Liver Congress™ (ILC-2016)
  • OCT 2016, US FDA grants breakthrough therapy designation to AbbVie’s G/P to treat HCV 

AbbVie’s investigational, pan-genotypic regimen of glecaprevir (ABT-493) / pibrentasvir (ABT-530) (G/P) has received breakthrough therapy designation from the US Food and Drug Administration (FDA) to treat chronic hepatitis C virus (HCV).

Image result for Glecaprevir

str1

HCV is the principal cause of non-A, non-B hepatitis and is an increasingly severe public health problem both in the developed and developing world. It is estimated that the virus infects over 200 million people worldwide, surpassing the number of individuals infected with the human immunodeficiency virus (HIV) by nearly five fold. HCV infected patients, due to the high percentage of individuals inflicted with chronic infections, are at an elevated risk of developing cirrhosis of the liver, subsequent hepatocellular carcinoma and terminal liver disease. HCV is the most prevalent cause of hepatocellular cancer and cause of patients requiring liver transplantations in the western world.

There are considerable barriers to the development of anti-HCV therapeutics, which include, but are not limited to, the persistence of the virus, the genetic diversity of the virus during replication in the host, the high incident rate of the virus developing drug-resistant mutants, and the lack of reproducible infectious culture systems and small-animal models for HCV replication and pathogenesis. In a majority of cases, given the mild course of the infection and the complex biology of the liver, careful consideration must be given to antiviral drugs, which are likely to have significant side effects.

Only two approved therapies for HCV infection are currently available. The original treatment regimen generally involves a 3-12 month course of intravenous interferon-α (IFN-α), while a new approved second-generation treatment involves co-treatment with IFN-α and the general antiviral nucleoside mimics like ribavirin. Both of these treatments suffer from interferon related side effects as well as low efficacy against HCV infections. There exists a need for the development of effective antiviral agents for treatment of HCV infection due to the poor tolerability and disappointing efficacy of existing therapies.

In a patient population where the majority of individuals are chronically infected and asymptomatic and the prognoses are unknown, an effective drug would desirably possess significantly fewer side effects than the currently available treatments. The hepatitis C non-structural protein-3 (NS3) is a proteolytic enzyme required for processing of the viral polyprotein and consequently viral replication. Despite the huge number of viral variants associated with HCV infection, the active site of the NS3 protease remains highly conserved thus making its inhibition an attractive mode of intervention. Recent success in the treatment of HIV with protease inhibitors supports the concept that the inhibition of NS3 is a key target in the battle against HCV.

HCV is a flaviridae type RNA virus. The HCV genome is enveloped and contains a single strand RNA molecule composed of circa 9600 base pairs. It encodes a polypeptide comprised of approximately 3010 amino acids.

The HCV polyprotein is processed by viral and host peptidase into 10 discreet peptides which serve a variety of functions. There are three structural proteins, C, E1 and E2. The P7 protein is of unknown function and is comprised of a highly variable sequence. There are six non-structural proteins. NS2 is a zinc-dependent metalloproteinase that functions in conjunction with a portion of the NS3 protein. NS3 incorporates two catalytic functions (separate from its association with NS2): a serine protease at the N-terminal end, which requires NS4A as a cofactor, and an ATP-ase-dependent helicase function at the carboxyl terminus. NS4A is a tightly associated but non-covalent cofactor of the serine protease.

The NS3/4A protease is responsible for cleaving four sites on the viral polyprotein. The NS3-NS4A cleavage is autocatalytic, occurring in cis. The remaining three hydrolyses, NS4A-NS4B, NS4B-NS5A and NS5A-NS5B all occur in trans. NS3 is a serine protease which is structurally classified as a chymotrypsin-like protease. While the NS serine protease possesses proteolytic activity by itself, the HCV protease enzyme is not an efficient enzyme in terms of catalyzing polyprotein cleavage. It has been shown that a central hydrophobic region of the NS4A protein is required for this enhancement. The complex formation of the NS3 protein with NS4A seems necessary to the processing events, enhancing the proteolytic efficacy at all of the sites.

A general strategy for the development of antiviral agents is to inactivate virally encoded enzymes, including NS3, that are essential for the replication of the virus. Current efforts directed toward the discovery of NS3 protease inhibitors were reviewed by S. Tan, A. Pause, Y. Shi, N. Sonenberg, Hepatitis C Therapeutics: Current Status and Emerging Strategies, Nature Rev. Drug Discov. 1, 867-881 (2002).

PATENT

US 20120070416

Yat Sun Or, Jun Ma, Guoqiang Wang, Jiang Long, Bin Wang 

Enanta Pharmaceuticals, Inc.

Example 6Compound of Formula VIII, Wherein

Figure US20120070416A1-20120322-C01583

Step 6a

Figure US20120070416A1-20120322-C01584

The acid 1-6a (21 mg, 0.0356 mmol) was dissolved in DCM (1.5 ml), and to this solution was added sulfonamide 1-7e (13.0 mg, 0.0463 mmol), HATU (17.6 mg, 0.0462 mmol) and DIPEA (12.4 ul, 0.0712 mmol). The mixture was stirred for 3 h, and then diluted with DCM. The organic layer was washed with 1 N HCl, water, brine, dried and concentrated in vacuo. The residue was purified by HPLC to afford the title compound. MS-ESI m/z 839.41 (M+H)+.

REFERENCES

http://aac.asm.org/content/60/3/1546.full

////////////glecaprevir, ABT-493, US FDA, breakthrough therapy designation,  AbbVie’s G/P,  treat HCV , PHASE 2, A-1282576.0, 1365970-03-1, US 20120070416

CC1(CC1)S(=O)(=O)NC(=O)[C@]2(C[C@H]2C(F)F)NC(=O)[C@@H]3C[C@@H]4CN3C(=O)[C@@H](NC(=O)O[C@@H]5CCC[C@H]5OC/C=C/C(c6c(nc7ccccc7n6)O4)(F)F)C(C)(C)C

Image result for Glecaprevir

US FDA grants breakthrough therapy designation to AbbVie’s G/P to treat HCV

Image result for Glecaprevir

4 October 2016

AbbVie’s investigational, pan-genotypic regimen of glecaprevir (ABT-493) / pibrentasvir (ABT-530) (G/P) has received breakthrough therapy designation from the US Food and Drug Administration (FDA) to treat chronic hepatitis C virus (HCV).

The HCV is a bloodborne virus commonly transmitted through injecting drug use due to the sharing of injection equipment, reuse or inadequate sterilisation of medical equipment, and the transfusion of unscreened blood and blood products.

The designation facilitates the use of AbbVie’s G/P to treat chronic HCV patients who failed previous therapy with direct-acting antivirals (DAAs) in genotype 1 (GT1), including therapy with an NS5A inhibitor and / or protease inhibitor.

AbbVie research and development executive vice-president Michael Severino said: “AbbVie is committed to advancing HCV care and addressing areas of continued unmet need for people living with chronic HCV.

“AbbVie is committed to advancing HCV care and addressing areas of continued unmet need for people living with chronic HCV.”

“The FDA’s breakthrough therapy designation is an important step in our effort to bring our pan-genotypic regimen to market, which we are also investigating as an eight-week path to virologic cure for the majority of patients.”

AbbVie said that G/P is currently in Phase III trials evaluating the safety and efficacy of the regimen across all major HCV genotypes (genotypes 1-6).

Figures released by the World Health Organisation revealed that an estimated 700,000 people die each year from hepatitis C-related liver diseases.

There is currently no vaccine for hepatitis C, although research in this area is underway at present.

VADADUSTAT, вададустат , فادادوستات , 伐达度司他 ,


Vadadustat structure.png

Vadadustat.png

VADADUSTAT

AKB-6548, PG-1016548
PG1016548, UNII:I60W9520VV, B-506

CAS 1000025-07-9

[5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxamido]acetic acid

N-[[5-(3-Chlorophenyl)-3-hydroxy-2-pyridinyl]carbonyl]glycine

MF C14H11ClN2O4 , 306.0407

вададустат [Russian] [INN]
فادادوستات [Arabic] [INN]
伐达度司他 [Chinese] [INN]
2-(5-(3-Chlorophenyl)-3-hydroxypicolinamido)acetic acid
A1Z
N-(5-(3-Chlorophenyl)-3-hydroxypyridine-2-carbonyl)glycine
US8598210, 118
[5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxamido]acetic acid
1000025-07-9 [RN]
10289
AKB-6548
Glycine, N-[[5-(3-chlorophenyl)-3-hydroxy-2-pyridinyl]carbonyl]- [ACD/Index Name]
I60W9520VV
N-[5-(3-chlorophenyl)-3-hydroxypyridine-2-carbonyl]glycine
N-{[5-(3-Chlorophenyl)-3-hydroxy-2-pyridinyl]carbonyl}glycine [ACD/IUPAC Name]
 
PG1016548
UNII:I60W9520VV
Inventors Richard Kawamoto
Original Assignee The Procter & Gamble Company

for Treatment of Anemia associated with Chronic Kidney Disease (CKD)

USFDA APPROVED 3/27/2024 Vafseo, To treat anemia due to chronic kidney disease

Treatment of anemia due to chronic kidney disease

Akebia Therapeutics, under license from Procter & Gamble Pharmaceuticals, and licensees Mitsubishi Tanabe Pharma and Otsuka,

Image result for VADADUSTAT

  • Originator Procter & Gamble
  • Developer Akebia Therapeutics
  • Class Antianaemics; Chlorophenols; Pyridines; Small molecules
  • Mechanism of Action Hypoxia-inducible factor-proline dioxygenase inhibitors
  • Phase III Anaemia
  • 01 Aug 2016 Akebia Therapeutics initiates the phase III INNO2VATE trial for Anaemia in USA (NCT02865850)
  • 23 May 2016 Interim drug interactions and adverse events data from a phase I trial (In volunteers) Chronic kidney disease released by Akebia
  • 05 May 2016 Akebia completes a clinical trial (ethnobridging study) in Healthy volunteers

Vadadustat (also known as AKB-6548) in anemia secondary to chronic kidney disease (CKD)

We are developing our lead product candidate, vadadustat, to be the potential best-in-class hypoxia inducible factor–prolyl hydroxylase inhibitor for the treatment of anemia secondary to CKD.

PATENT

CN 105837502

https://patents.google.com/patent/CN105837502A/sv

HIF inhibitor Vadadustat (Code AKB-6548) The chemical name N- [5- (3- chlorophenyl) -3-hydroxypyridine-2-carbonyl] glycine,

Vadadustat is a treatment for anemia associated with chronic kidney disease oral HIF inhibitor, is an American biopharmaceutical company Akebia Therapeutics invention in the research of new drugs, has completed Phase II pivotal clinical trial treatment studies, successfully met the researchers set given the level of hemoglobin in vivo target and good security, a significant effect, and phase III clinical trials.

 U.S. Patent Publication US20120309977 synthetic route for preparing a Vadadustat: A 3-chlorophenyl boronic acid and 3,5_-dichloro-2-cyanopyridine as starting materials, by-catalyzed coupling methoxy substituted, cyano hydrolysis and condensation and ester hydrolysis reaction Vadadustat, process route is as follows:

Since the entire synthetic route 12 steps long, complicated operation, high cost.U.S. Patent No. 1 2 ^ ¥ disclosed 20070299086 & (^ (Scheme 3 1118 seven seven to 3,5-dichloro-2-cyanopyridine starting material, first-dichloro substituted with benzyloxy, then cyano hydrolysis, condensation, hydrogenation and deprotection trifluorosulfonyl, to give N- [5- trifluoromethanesulfonyloxy-3-hydroxypyridine-2-carbonyl) glycine methyl ester, 3-chlorophenyl and then boronic acid catalyzed coupling reactions, the final ester hydrolysis reaction Vadadustat, process route is as follows:

 

The synthesis steps long, intermediate products and final products contain more impurities and byproducts, thus purified requires the use of large amounts of solvents, complicated operation, low yield, and because the hydrogenation reaction is a security risk on the production, not conducive to the promotion of industrial production, it is necessary to explore a short process, simple operation, low cost synthetic method whereby industrial production Vadadus tat fit.

Example 1

A) Preparation of N- (3,5_-dichloro-2-carbonyl) glycine methyl ester:

3,5-dichloro-2-pyridinecarboxylic acid (19.2g, 0.10mol) and N, N’_ carbonyldiimidazole (24.3g, 0.15mol) was dissolved in N, N- dimethylformamide (100 mL ), was added glycine methyl ester hydrochloride (15.18,0.12111〇1), 11 was added dropwise diisopropylethylamine (51.7g, 0.40mol), the reaction mixture was stirred 35 ° C for 8 hours, TLC determined the completion of reaction gussets The reaction solution was concentrated by rotary evaporation to dryness, dilute hydrochloric acid was adjusted to neutral by adding ethyl acetate, dried over magnesium sulfate, and concentrated by rotary evaporation to dryness, and recrystallized from methanol to give N- (3,5- dichloro-pyridin-2 – carbonyl) glycine methyl ester, an off-white solid (21.6g), a yield of 82.0%, this reaction step is as follows:

str1

1234567 B) Preparation of N- [5- (3- chlorophenyl) -3-chloropyridine-2-carbonyl] glycine methyl ester: 2

1 (3,5-dichloro-2-carbonyl) glycine methyl ester (20 (^, 〇1 76111111), 3-chlorophenyl boronic acid (13.18, 3 83.7mmol), [l, l’- bis (diphenylphosphino) ferrocene] dichloropalladium (2.8g, 3.8mmol), potassium carbonate (14.2g, 4 0. lmo 1) and N, N- dimethylformamide (75mL) was added The reaction flask, the reaction mixture was heated to 60 ° C for 20 hours the reaction was stirred for 5:00, point TLC plates to determine completion of the reaction, the reaction solution was cooled to room temperature, was concentrated by rotary evaporation to dryness, extracted with ethyl acetate, washed with brine, sulfuric acid 6 magnesium dried and concentrated by rotary evaporation to dryness, a mixed solvent of ethyl acetate and n-hexane was recrystallized to give N- [5- (3- chlorophenyl) -3-7-chloro-2-carbonyl] glycine methyl ester, white solid (19.7g), yield 76.4%, this reaction step is as follows:

str1

C) Preparation of N_ [5- (3- chlorophenyl) -3-methoxy-pyridine-2-carbonyl] glycine:

N- [5- (3- chlorophenyl) -3-chloropyridine-2-carbonyl] glycine methyl ester (19 (^, 56111 111〇1) and sodium methoxide (7.6g, 0.14mol) was dissolved in methanol (150 mL), the reaction mixture was heated to 65 ° C, the reaction was stirred at reflux for 24 hours, TLC determined gussets completion of the reaction the reaction solution was cooled to room temperature, water (300mL) was stirred for 3h, cooled to 0 ° C, stirred for 2h, precipitated solid was filtered, the filter cake was dried to give N- [5- (3- chlorophenyl) -3-methoxy-pyridine-2-carbonyl] glycine, off-white solid (17.4 g of), a yield of 96.5%, of the reaction steps are as follows:

str1

 

D) Preparation Vadadustat:

N- [5- (3- chlorophenyl) -3-methoxy-pyridine-2-carbonyl] glycine (16.68,51.7111111〇1) and 48% hydrobromic acid solution (52mL, 0.46mol) added to the reaction bottle, the reaction mixture was heated to 100 ° C, the reaction was stirred at reflux for 24 hours, TLC determined gussets completion of the reaction the reaction solution cooled square ~ 5 ° C, was slowly added 50% sodium hydroxide solution was adjusted to pH 2 at 0 -5 ° C under crystallization 3h, the filter cake washed with ethyl acetate and n-hexane mixed solvent of recrystallization, in finished Vadadustat, off-white solid (15.6g), a yield of 98.0%, this reaction step is as follow

str1

PATENT

WO-2016153996

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2016153996&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCTDescriptiohttps://patentscope.wipo.int/search/en/detail.jsf?docId=WO2016153996&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCTDescription

Lanthier et al. (U.S. Patent Application 2012/0309977) described a procedure for synthesizing a compound of Formula (II) starting from 3-chloroboronic acid and 3,5-dichloropicolinonitrile, as shown in the scheme below:

Scheme 1

Scheme 2

PATENT

WO 2015073779

FORM A, B C REPORTED

https://www.google.com/patents/WO2015073779A1?cl=en

Form A of Compound (I):

Figure imgf000004_0001

(I),

which has an X-ray powder diffraction pattern as shown in FIG. 1. In certain embodiments, Form A of Compound (I) has an X-ray powder diffraction pattern comprising one, two, three, four, or five peaks at approximately 18.1 , 20.3, 22.9, 24.0, and 26.3 °2Θ; and wherein the crystalline Compound (I) is substantially free of any other crystalline form of Compound (I).

Compound (I) as prepared according to e.g., U.S. 7,811,595 and/or U.S. Patent Application No. 13/488,554 and then subjecting the resulting Compound (I)

Figure imgf000026_0001

(I),

to a procedure comprising

a) preparing a solution of Compound (I) in 2-methyltetrahydrofuran;

b) adding n-heptane;

c) heating the suspension {e.g., to about 40-50 °C);

d) cooling the suspension {e.g., to about 0-10 °C); and

c) isolating the crystals.

SYNTHESIS

US 2015361043

 Vadadustat pk_prod_list.xml_prod_list_card_pr?p_tsearch=A&p_id=724024

Synthesis of vadadustat and its intermediates is described. The process involves Suzuki coupling of 3,5-dichloropyridine-2-carbonitrile with (3-chlorophenyl)boronic acid, selective chloride displacement, simultaneous hydrolysis of nitrile and methyl ether, activation with CDI, condensation with methyl glycinate hydrochloride and finally ester hydrolysis. The process is simple and provides high product yield with high quality. Vadadustat is expected to be useful for the treatment of renal failure anemia (1). Suzuki coupling of 3,5-dichloropyridine-2-carbonitrile (I) with (3-chlorophenyl)boronic acid (II) in the presence of PdCl2(dppf) and K2CO3 in DMF yields 3-chloro-5-(3-chlorophenyl)pyridine-2-carbonitrile (III), which upon selective chloride displacement with NaOMe in refluxing MeOH affords methyl ether (IV). Hydrolysis of nitrile and methyl ether in intermediate (IV) with HBr or HCl at 100 °C furnishes 5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxylic acid (V). After activation of carboxylic acid (V) with CDI or pivaloyl chloride and DIEA in DMSO, condensation with methyl glycinate hydrochloride (VI) in the presence of DIEA provides vadadustat methyl ester (VII). Finally, hydrolysis of ester (VII) with NaOH in H2O/THF produces the target vadadustat (1).

PATENT

US 20120309977

  • FIG. 1 depicts an outline of one embodiment for preparing the disclosed prolyl hydroxylase inhibitors.
     
    FIG. 2 depicts an outline of one embodiment for preparing the disclosed prolyl hydroxylase inhibitor ester prodrugs.
     
    FIG. 3 depicts an outline of one embodiment for preparing the disclosed prolyl hydroxylase inhibitor amide prodrugs.

Example 1 describes a non-limiting example of the disclosed process for the preparation of a prolyl hydroxylase ester pro-drug

Figure US20120309977A1-20121206-C00044

Figure US20120309977A1-20121206-C00045

EXAMPLE 1Methyl {[5-(3-chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetate (4)

Preparation of 5-(3-chlorophenyl)-3-chloro-2-cyanopyridine (1): To a 100 mL round bottom flask adapted for magnetic stirring and equipped with a nitrogen inlet was charged (3-chlorophenyl)boronic acid (5 g, 32 mmol), 3,5-dichloro-2-cyanopyridine (5.8 g, 34 mmol), K2CO(5.5 g, 40 mmol), [1,1′-bis(diphenyphosphino)ferrocene]dichloro-palladium(II) [PdCl2(dppf)] (0.1 g, 0.13 mmol), dimethylformamide (50 mL) and water (5 mL). The reaction solution was agitated and heated to 45° C. and held at that temperature for 18 hours after which the reaction was determined to be complete due to the disappearance of 3,5-dichloro-2-cyanopyridine as measured by TLC analysis using ethyl acetate/methanol (4:1) as the mobile phase and UV 435 nm to visualize the reaction components. The reaction solution was then cooled to room temperature and the contents partitioned between ethyl acetate (250 mL) and saturated aqueous NaCl (100 mL). The organic phase was isolated and washed a second time with saturated aqueous NaCl (100 mL). The organic phase was dried for 4 hours over MgSO4, the MgSOremoved by filtration and the solvent removed under reduced pressure. The residue that remained was then slurried in methanol (50 mL) at room temperature for 20 hours. The resulting solid was collected by filtration and washed with cold methanol (50 mL) then hexanes (60 mL) and dried to afford 5.8 g (73% yield) of an admixture containing a 96:4 ratio of the desired regioisomer. 1H NMR (DMSO-d6) δ 9.12 (d, 1H), 8.70 (d, 1H), 8.03 (t, 1H) 7.88 (m, 1H), and 7.58 (m, 2H)

Preparation of 5-(3-chlorophenyl)-3-methoxy-2-cyanopyridine (2): To a 500 mL round bottom flask adapted for magnetic stirring and fitted with a reflux condenser and nitrogen inlet was charged with 5-(3-chlorophenyl)-3-chloro-2-cyanopyridine, 1, (10 g, 40 mmol), sodium methoxide (13.8 mL, 60 mmol) and methanol (200 mL). With stirring, the reaction solution was heated to reflux for 20 hours. The reaction was determined to be complete due to the disappearance of 5-(3-chlorophenyl)-3-chloro-2-cyanopyridine as measured by TLC analysis using hexane/ethyl acetate (6:3) as the mobile phase and UV 435 nm to visualize the reaction components. The reaction mixture was cooled to room temperature and combined with water (500 mL). A solid began to form. The mixture was cooled to 0° C. to 5° C. and stirred for 3 hours. The resulting solid was collected by filtration and washed with water, then hexane. The resulting cake was dried in vacuo at 40° C. to afford 9.4 g (96% yield) of the desired product as an off-white solid. 1H NMR (DMSO-d6) δ 8.68 (d, 1H), 8.05 (d, 1H), 8.01 (s, 1H) 7.86 (m, 1H), 7.59 (s, 1H), 7.57 (s, 1H) and 4.09 (s, 3H).

Preparation of 5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxylic acid (3): To a 50 mL round bottom flask adapted for magnetic stirring and fitted with a reflux condenser was charged 5-(3-chlorophenyl)-3-methoxy-2-cyanopyridine, 2, (1 g, 4 mmol) and a 48% aqueous solution of HBr (10 mL). While being stirred, the reaction solution was heated to reflux for 20 hours. The reaction was determined to be complete due to the disappearance of 5-(3-chlorophenyl)-3-methoxy-2-cyanopyridine as measured by TLC analysis using hexane/ethyl acetate (6:3) as the mobile phase and UV 435 nm to visualize the reaction components. The reaction contents was then cooled to 0° C. to 5° C. with stirring and the pH was adjusted to approximately 2 by the slow addition of 50% aqueous NaOH. Stirring was then continued at 0° C. to 5° C. for 3 hours. The resulting solid was collected by filtration and washed with water, then hexane. The resulting cake was dried in vacuo at 40° C. to afford 1.03 g (quantitative yield) of the desired product as an off-white solid. 1H NMR (DMSO-d6) δ 8.52 (d, 1H), 7.99 (d, 1H), 7.95 (s, 1H) 7.81 (t, 1H), 7.57 (s, 1H), and 7.55 (s, 1H).

Preparation of methyl {[5-(3-chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetate (4): To a 50 mL round bottom flask adapted for magnetic stirring and fitted with a nitrogen inlet tube was charged 5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxylic acid, 3, (1 gm, 4 mmol), N,N′-carbonyldiimidazole (CDI) (0.97 g, 6 mmol) and dimethyl sulfoxide (5 mL). The reaction mixture was stirred at 45° C. for about 1 hour then cooled to room temperature. Glycine methyl ester hydrochloride (1.15 g, 12 mmol) is added followed by the dropwise addition of diisopropylethylamine (3.2 mL, 19 mmol). The mixture was then stirred for 2.5 hours at room temperature after which water (70 mL) was added. The contents of the reaction flask was cooled to 0° C. to 5° C. and 1N HCl was added until the solution pH is approximately 2. The solution was extracted with dichloromethane (100 mL) and the organic layer was dried over MgSOfor 16 hours. Silica gel (3 g) is added and the solution slurried for 2 hours after which the solids are removed by filtration. The filtrate is concentrated to dryness under reduced pressure and the resulting residue was slurried in methanol (10 mL) for two hours. The resulting solid was collected by filtration and washed with cold methanol (20 mL) then hexane and the resulting cake is dried to afford 0.85 g of the desired product as an off-white solid. The filtrate was treated to afford 0.026 g of the desired product as a second crop. The combined crops afford 0.88 g (68% yield) of the desired product. 1H NMR (DMSO-d6) δ 12.3 (s, 1H), 9.52 (t, 1H), 8.56 (d, 1H), 7.93 (s, 1H), 7.80 (q, 2H), 7.55 (t, 2H), 4.12 (d, 2H), and 3.69 (s, 3H).

The formulator can readily scale up the above disclosed synthesis. Disclosed herein below is a synthesis wherein the disclosed process is scaled up for commercial use

EXAMPLE 2Methyl {[5-(3-chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetate (4)

Preparation of 5-(3-chlorophenyl)-3-chloro-2-cyanopyridine (1): A 20 L reactor equipped with a mechanical stirrer, dip tube, thermometer and nitrogen inlet was charged with (3-chlorophenyl)boronic acid (550 g, 3.52 mol), 3,5-dichloro-2-cyanopyridine (639 g, 3.69 mol), K2CO(5.5 g, 40 mmol), [1,1′-bis(diphenyphosphino)ferrocene]dichloro-palladium(II) [PdCl2(dppf)] (11.5 g, 140 mmol), and dimethylformamide (3894 g, 4.125 L). The reaction solution was agitated and purged with nitrogen through the dip-tube for 30 minutes. Degassed water (413 g) was then charged to the reaction mixture while maintaining a temperature of less than 50° C. 25 hours. The reaction was determined to be complete due to the disappearance of 3,5-dichloro-2-cyanopyridine as measured by TLC analysis using ethyl acetate/methanol (4:1) as the mobile phase and UV 435 nm to visualize the reaction components. The reaction solution was then cooled to 5° C. and charged with heptane (940 g, 1.375 L) and agitated for 30 minutes. Water (5.5 L) was charged and the mixture was further agitated for 1 hour as the temperature was allowed to rise to 15° C. The solid product was isolated by filtration and washed with water (5.5 L) followed by heptane (18881 g, 2750 ML). The resulting cake was air dried under vacuum for 18 hours and then triturated with a mixture of 2-propanol (6908 g, 8800 mL0 and heptane (1 g, 2200 mL0 at 50° C. for 4 hours, cooled to ambient temperature and then agitated at ambient temperature for 1 hour. The product was then isolated by filtration and washed with cold 2-propanol (3450 g, 4395 mL) followed by heptane (3010 g, 4400 mL). The resulting solid was dried under high vacuum at 40° C. for 64 hours to afford 565.9 g (65% yield) of the desired product as a beige solid. Purity by HPLC was 98.3. 1H NMR (DMSO-d6) δ 9.12 (d, 1H), 8.70 (d, 1H), 8.03 (t, 1H) 7.88 (m, 1H), and 7.58 (m, 2H).

Preparation of 5-(3-chlorophenyl)-3-methoxy-2-cyanopyridine (2): A 20 L reactor equipped with a mechanical stirred, condenser, thermometer and nitrogen inlet was charged with 5-(3-chlorophenyl)-3-chloro-2-cyanopyridine, 1, (558 g, 2.24 mol) and sodium methoxide (25% solution in methanol, 726.0 g, 3.36 mol). With agitation, the reaction solution was heated to reflux for 24 hours, resulting in a beige-colored suspension. The reaction was determined to be complete due to the disappearance of 5-(3-chlorophenyl)-3-chloro-2-cyanopyridine as measured by TLC analysis using hexane/ethyl acetate (6:3) as the mobile phase and UV 435 nm to visualize the reaction components. The reaction mixture was cooled to 5° C. and then charged with water (5580 mL). The resulting slurry was agitated for 3 hours at 5° C. The solid product was isolated by filtration and washed with water (5580 mL) until the filtrate had a pH of 7. The filter cake was air dried under vacuum for 16 hours. The filter cake was then charged back to the reactor and triturated in MeOH (2210 g, 2794 mL) for 1 hour at ambient temperature. The solid was collected by filtration and washed with MeOH (882 g, 1116 mL, 5° C.) followed by heptane (205 mL, 300 mL), and dried under high vacuum at 45° C. for 72 hours to afford 448 g (82% yield) of the desired product as an off-white solid. Purity by HPLC was 97.9%. 1H NMR (DMSO-d6) δ 8.68 (d, 1H), 8.05 (d, 1H), 8.01 (s, 1H) 7.86 (m, 1H), 7.59 (s, 1H), 7.57 (s, 1H) and 4.09 (s, 3H).

Preparation of 5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxylic acid (3): A 20 L reactor equipped with a mechanical stirrer, condenser, thermometer, nitrogen inlet and 25% aqueous NaOH trap was charged 5-(3-chlorophenyl)-3-methoxy-2-cyanopyridine, 2, (440.6 g, 1.8 mol) and 37% aqueous solution of HCl (5302 g). While being agitated, the reaction solution was heated to 102° C. for 24 hours. Additional 37% aqueous HCl (2653 g) was added followed by agitation for 18 hours at 104° C. The reaction contents was then cooled to 5° C., charged with water (4410 g) and then agitated at 0° C. for 16 hours. The resulting precipitated product was isolated by filtration and washed with water until the filtrate had a pH of 6 (about 8,000 L of water). The filter cake was pulled dry under reduced pressure for 2 hours. The cake was then transferred back into the reactor and triturated in THF (1958 g, 2201 mL) at ambient temperature for 2 hours. The solid product was then isolated by filtration and washed with THF (778 g, 875 mL) and dried under reduced pressure at 5° C. for 48 hours to afford 385 g (89% yield) of the desired product as an off-white solid. HPLC purity was 96.2%. 1H NMR (DMSO-d6) δ 8.52 (d, 1H), 7.99 (d, 1H), 7.95 (s, 1H) 7.81 (t, 1H), 7.57 (s, 1H), and 7.55 (s, 1H).

Preparation of methyl {[5-(3-chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetate (4): A 20 L reactor equipped with a mechanical stirrer, condenser, thermometer and nitrogen inlet was charged with 5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxylic acid, 3, (380 g, 1.52 mol) and diisopropylethylamine (DIPEA) (295 g, 2.28 mol). With agitation, the solution was cooled to 3° C. and charged with trimethylacetyl chloride (275.7 g, 2.29 mol) while maintaining a temperature of less than 11° C., The mixture was then agitated at ambient temperature for 2 hours. The mixture was then cooled to 10° C. and charged with a slurry of glycine methyl ester HCl (573.3 g, 4. 57 mol) and THF (1689 g, 1900 mL), then charged with DIPEA (590.2 g, 4.57 mol) and agitated at ambient temperature for 16 hours. The mixture was then charged with EtOH (1500 g, 1900 mL) and concentrated under reduced pressure to a reaction volume of about 5.8 L. The EtOH addition and concentration was repeated twice more. Water (3800 g) was then added and the mixture was agitated for 16 hours at ambient temperature. The resulting solid product was isolated by filtration and washed with a mixture of EtOH (300 g, 380 mL) and water (380 g), followed by water (3800 g), dried under reduced pressure for 18 hours at 50° C. to afforded 443 g (91% yield) of the desired product as an off-white solid. Purity by HPLC was 98.9%. 1H NMR (DMSO-d6) δ 12.3 (s, 1H), 9.52 (t, 1H), 8.56 (d, 1H), 7.93 (s, 1H), 7.80 (q, 2H), 7.55 (t, 2H), 4.12 (d, 2H), and 3.69 (s, 3H).

Scheme II herein below outlines and Example 2 describes a non-limiting example of the disclosed process for preparing a prolyl hydroxylase inhibitor from an ester prodrug.

Figure US20120309977A1-20121206-C00046

EXAMPLE 3{[5-(3-Chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetic acid (5)

Preparation of {[5-(3 -chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetic acid (5): To a 50 mL flask is charged methyl {[5-(3-chlorophenyl)-3-hydroxypyridin-2-yl]amino}-acetate, 4, (0.45 g, 1.4 mmol), tetrahydrofuran (4.5 mL) and 1 M NaOH (4.5 mL, 4.5 mmol). The mixture was stirred for 2 hours at room temperature after which it was determined by TLC analysis using hexane/ethyl acetate (6:3) as the mobile phase and UV 435 nm to visualize the reaction components that the reaction was complete. The reaction solution was adjusted to pH 1 with concentrated HCl and the solution was heated at 35° C. under vacuum until all of the tetrahydrofuran had been removed. A slurry forms as the solution is concentrated. With efficient stirring the pH is adjusted to ˜2 with the slow addition of 1 M NaOH. The solid which forms was collected by filtration, washed with water, followed by hexane, then dried under vacuum to afford 0.38 g (88% yield) of the desired product as a white solid. 1H NMR (DMSO-d6) δ 12.84 (s, 1H), 12.39 (s, 1H), 9.39 (t, 1H), 8.56 (d, 1H), 7.94 (s, 1H), 7.81 (m, 2H), 7.55 (q, 2H), and 4.02 (d, 2H).

The formulator can readily scale up the above disclosed synthesis. Disclosed herein below is a synthesis wherein the disclosed process is scaled up for commercial use.

EXAMPLE 4{[5-(3-Chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetic acid (5)

Preparation of {[5-(3-chlorophenyl)-3-hydroxypyridin-2-yl]amino}acetic acid (5): To a 20 L reactor equipped with a mechanical stirrer, condenser, thermometer and nitrogen inlet was charged methyl {[5-(3-chlorophenyl)-3-hydroxypyridin-2-yl]amino}-acetate, 4, (440 g, 1.42 mol), tetrahydrofuran (3912 g, 4400 mL) and 1 M NaOH (4400 mL). The mixture was stirred for 2 hours at room temperature after which it was determined by TLC analysis using hexane/ethyl acetate (6:3) as the mobile phase and UV 435 nm to visualize the reaction components that the reaction was complete. The reaction solution was acidified to a pH of 2 with slow addition of 2M HCl (2359 g). The resulting mixture was concentrated under reduced pressure to a volume of about 7.5 L. Ware (2210 g) was added and the solution cooled to ambient temperature and agitated for 18 hours. The solid product was isolated by filtration and washed with water (6 L). the crude product was transferred back into the reactor and triturated with 2215 g o deionized water at 70° C. for 16 hours. The mixture was cooled to ambient temperature, The solid product was isolated by filtration and washed with water (500 mL) and dried under reduced pressure at 70° C. for 20 hours to afford 368 g (87% yield) of the desired product as an off-white solid. Purity by HPLC was 99.3%. 1H NMR (DMSO-d6) δ 12.84 (s, 1H), 12.39 (s, 1H), 9.39 (t, 1H), 8.56 (d, 1H), 7.94 (s, 1H), 7.81 (m, 2H), 7.55 (q, 2H), and 4.02 (d, 2H).

Scheme III herein below outlines and Example 3 describes a non-limiting example of the disclosed process for preparing a prolyl hydroxylase amide prodrug.

Figure US20120309977A1-20121206-C00047

EXAMPLE 55-(3-Chlorophenyl)-N-(2-amino-2-oxoethyl)-3-hydroxylpyridin-2-yl amide

Preparation of 5-(3-chlorophenyl)-N-(2-amino-2-oxoethyl)-3-hydroxylpyridin-2-yl amide (6): To a solution of 5-(3-chlorophenyl)-3-hydroxypyridine-2-carboxylic acid, 3, (749 mg, 3 mmol) in DMF (20 mL) at room temperature under Nis added 1-(3-dimethyl-aminopropyl)-3-ethylcarbodiimide (EDCI) (0.925 g, 5.97 mmol) and 1-hydroxybenzo-triazole (HOBt) (0.806 g, 5.97 mmol). The resulting solution is stirred for 15 minutes then 2-aminoacetamide hydrochloride (0.66 g, 5.97 mmol) and diisopropylethylamine (1.56 ml, 8.96 mmol) are added. The reaction is monitored by TLC and when the reaction is complete the reaction mixture is concentrated under reduced pressure and H2O added. The product can be isolated by normal work-up: The following data have been reported for compound (6). 1H NMR (250 MHz, DMSO-d6) δ ppm 12.46 (1H, s), 9.17 (1H, t, J=5.9 Hz), 8.55 (1H, d, J=2.0 Hz), 7.93 (1H, d, J=0.9 Hz), 7.75-7.84 (2H, m), 7.49-7.60 (3H, m), 7.18 (1H, s), 3.91 (2H, d, J=5.9 Hz). HPLC-MS: m/z 306 [M+H]+.

Scheme IV herein below depicts a non-limiting example the hydrolysis of an amide pro-drug to a prolyl hydroxylase inhibitor after removal of a R10 protecting group

Figure US20120309977A1-20121206-C00048

PATENT

US 20070299086

https://www.google.com/patents/US20070299086

REF

http://akebia.com/wp-content/themes/akebia/img/media-kit/abstracts-posters-presentations/Akebia_NKF%202016%20Poster_FINAL.pdf

Beuck S, Schänzer W, Thevis M. Hypoxia-inducible factor stabilizers and other
small-molecule erythropoiesis-stimulating agents in current and preventive doping
analysis. Drug Test Anal. 2012 Nov;4(11):830-45. doi: 10.1002/dta.390. Epub 2012
Feb 24. Review. PubMed PMID: 22362605.

Abstracts, posters, and presentations

The effect of altitude on erythropoiesis-stimulating agent dose, hemoglobin level, and mortality in hemodialysis patients

Vadadustat, a novel oral HIF stabilizer, provides effective anemia treatment in nondialysisdependent chronic kidney disease

2016 ERA-EDTA: Poster
A Drug-Drug Interaction Study to Evaluate the Effect of Vadadustat on the Pharmacokinetics of Celecoxib—a CYP2C9 Substrate—in Healthy Volunteers

2016 NKF: Poster
Vadadustat — a Novel, Oral Treatment for Anemia of CKD — Maintains Stable Hemoglobin Levels in Dialysis Patients Converting From Erythropoiesis-Stimulating Agent (ESA)

2015 ASN: Posters
Vadadustat Demonstrates Controlled Hemoglobin Response in a Phase 2b Study for the Treatment of Anemia in Patients with Non-Dialysis Dependent Chronic Kidney Disease

Dose Exposure Relationship of Vadadustat is Independent of the Level of Renal Function

Vadadustat, a Novel, Oral Treatment for Anemia of CKD, Maintains Stable Hemoglobin Levels in Dialysis Patients Converting from Erythropoiesis-Stimulating Agents

Hemoglobin Response in a Phase 2b Study of Vadadustat for the Treatment of Anemia in Patients with Non-Dialysis Dependent Chronic Kidney Disease

The Effect of Altitude on Erythropoiesis-Stimulating Agent Dose, Hemoglobin Level, and Mortality in Hemodialysis Patients

Erythropoiesis-Stimulating Agent Hyporesponse Is Associated with Persistently Elevated Mortality among Hemodialysis Patients

Variability in Hemoglobin Levels in Hemodialysis Patients in the Current Era

2014 ASN: Posters
Phase 2 Study of AKB-6548, a novel hypoxia-inducible factor prolyl-hydroxylase inhibitor (HIF-PHI) in patients with end stage renal disease (ESRD) undergoing hemodialysis (HD)

Hemodialysis has minimal impact on the pharmacokinetics of AKB-6548, a once-daily oral inhibitor of hypoxia-inducible factor prolyl-hydroxylases (HIF-PHs) for the treatment of anemia related to chronic kidney disease (CKD)

2014 ERA-EDTA: Oral presentation
Controlled Hemoglobin Response in a Double-Blind, Placebo-Controlled Trial of AKB-6548 in Subjects with Chronic Kidney Disease

2012 ASN: Oral presentation
AKB-6548, A New Hypoxia-Inducible Factor Prolyl Hydroxylase Inhibitor, Increases Hemoglobin in Chronic Kidney Disease Patients Without Increasing Basal Erythropoietin Levels

2011 ASN: Oral presentation
AKB-6548, A Novel Hypoxia-Inducible Factor Prolyl Hydroxylase Inhibitor Reduces Hepcidin and Ferritin while It Increases Reticulocyte Production and Total Iron Binding Capacity In Healthy Adults

2011 ASN: Poster
AKB-6548, A New Hypoxia-Inducible Factor Prolyl Hydroxylase Inhibitor Increases Hemoglobin While Decreasing Ferritin in a 28-day, Phase 2a Dose Escalation Study in Stage 3 and 4 Chronic Kidney Disease Patients With Anemia

Image result for VADADUSTAT

Image result for VADADUSTAT

WO2013013609A1 * Jul 23, 2012 Jan 31, 2013 Zhejiang Beta Pharma Incorporation Polymorphic forms of compounds as prolyl hydroxylase inhibitor, and uses thereof
US20070299086 * Jun 26, 2007 Dec 27, 2007 The Procter & Gamble Company Prolyl hydroxylase inhibitors and methods of use
US20100331303 * Aug 20, 2010 Dec 30, 2010 Richard Masaru Kawamoto Prolyl hydroxylase inhibitors and methods of use
US20130203816 * Nov 20, 2012 Aug 8, 2013 Akebia Therapeutics Inc. Prolyl hydroxylase inhibitors and methods of use
         
WO2016118858A1 * Jan 22, 2016 Jul 28, 2016 Akebia Therapeutics, Inc. Solid forms of 2-(5-(3-fluorophenyl)-3-hydroxypicolinamido)acetic acid, compositions, and uses thereof

clip

Akebia Therapeutics

Oct 6, 2015
 

Akebia Reaches Agreement with FDA and EMA on Vadadustat Global Phase 3 Program

Plans to Initiate Phase 3 PRO2TECT Clinical Program by Year-End

CAMBRIDGE, Mass.–(BUSINESS WIRE)– Akebia Therapeutics, Inc. (NASDAQ: AKBA), a biopharmaceutical company focused on delivering innovative therapies to patients with kidney disease through the biology of hypoxia inducible factor (HIF), today announced the successful completion of the End-of-Phase 2 Meeting process with the United States Food and Drug Administration (FDA) and the Scientific Advice Process with the European Medicines Agency (EMA) for its lead product, vadadustat (formerly AKB-6548), for patients with anemia related to non-dialysis dependent chronic kidney disease (NDD-CKD). The company has reached agreement with both the FDA and EMA regarding key elements of the Phase 3 program, known as the PRO2TECT™ program, and expects to launch the program later this year.

The PRO2TECT™ program includes two separate studies and will collectively enroll approximately 3,100 NDD-CKD patients across 500 sites globally. The correction study will address anemia patients not currently being treated with recombinant erythropoiesis stimulating agents (rESAs). The conversion study includes patients currently receiving rESA who will be converted to either vadadustat or the active control with the goal of maintaining their baseline hemoglobin levels. Both studies will include a 1:1 randomization and an open label, active-control, non-inferiority design. Primary endpoints include an efficacy assessment of the hemoglobin response and an assessment of cardiovascular safety measured by major adverse cardiovascular events.

“Akebia’s Phase 3 program is designed to provide the medical community and regulators with a clear understanding of vadadustat’s potential benefit and safety advantages over rESAs, the current standard of care worldwide and, with a positive outcome, to establish vadadustat as the best-in-class treatment option for patients with renal anemia,” stated John P. Butler, President and Chief Executive Officer of Akebia. “We are pleased that the regulators are in agreement regarding the importance of an active-control trial as this design is the most clinically relevant and commercially valuable, and will allow us the quickest path to full enrollment. We are now moving rapidly to launch these studies and advance our goal of bringing forward new treatment options for patients suffering from renal anemia.”

“This Phase 3 program builds on the positive data from our Phase 2 program in NDD-CKD patients which demonstrated that once-daily vadadustat can control and maintain hemoglobin levels in a clinically relevant range while minimizing fluctuations in hemoglobin levels that are associated with increased cardiovascular safety risks,” stated Brad Maroni, M.D., Chief Medical Officer at Akebia. “These two Phase 3 event-driven studies are designed to establish the safety and efficacy of vadadustat in the setting of contemporary clinical practice patterns, and support regulatory approvals globally.”

In addition, Akebia discussed with the FDA and EMA a parallel Phase 3 program, known as the INNO2VATE™ program, for vadadustat in patients with anemia related to chronic kidney disease who are undergoing dialysis (DD-CKD). Akebia expects to formalize its Phase 3 program in DD-CKD patients after presenting the results from its recently completed Phase 2 study to both regulatory agencies.

About Vadadustat (Formerly AKB-6548)

Vadadustat is an oral therapy currently in development for the treatment of anemia related to chronic kidney disease (CKD). Vadadustat is designed to stabilize HIF, a transcription factor that regulates the expression of genes involved with red blood cell (RBC) production in response to changes in oxygen levels, by inhibiting the hypoxia-inducible factor prolyl hydroxylase (HIF-PH) enzyme. Vadadustat exploits the same mechanism of action used by the body to naturally adapt to lower oxygen availability associated with a moderate increase in altitude. At higher altitudes, the body responds to lower oxygen availability with increased production of HIF, which coordinates the interdependent processes of iron mobilization and erythropoietin (EPO) production to increase RBC production and, ultimately, improve oxygen delivery.

As a HIF stabilizer with best-in-class potential, vadadustat raises hemoglobin levels predictably and sustainably, with a dosing regimen that allows for a gradual and controlled titration. Vadadustat has been shown to improve iron mobilization, potentially eliminating the need for intravenous iron administration and reducing the overall need for iron supplementation.

About Anemia Related to CKD

Approximately 30 million people in the United States have CKD, with an estimated 1.8 million of these patients suffering from anemia. Anemia results from the body’s inability to coordinate RBC production in response to lower oxygen levels due to the progressive loss of kidney function, which occurs in patients with CKD. Left untreated, anemia significantly accelerates patients’ overall deterioration of health with increased morbidity and mortality. Renal anemia is currently treated with injectable rESAs, which are associated with inconsistent hemoglobin responses and well-documented safety risks.

About Akebia Therapeutics

Akebia Therapeutics, Inc. is a biopharmaceutical company headquartered in Cambridge, Massachusetts, focused on delivering innovative therapies to patients with kidney disease through HIF biology. The company has completed Phase 2 development of its lead product candidate, vadadustat, an oral therapy for the treatment of anemia related to CKD in both non-dialysis and dialysis patients.

clip

Akebia Announces Positive Top-Line Results from its Phase 2 Study of Vadadustat in Dialysis Patients with Anemia Related to Chronic Kidney Disease

-Treatment with Vadadustat Successfully Maintained Mean Hemoglobin Levels Following Conversion from rESA Therapy-

-Vadadustat Demonstrated a Favorable Safety Profile with Once Daily and Three Times per Week Dosing-

 

CAMBRIDGE, Mass.–(BUSINESS WIRE)–Akebia Therapeutics, Inc. (NASDAQ:AKBA), a biopharmaceutical company focused on delivering innovative therapies to patients with kidney disease through the biology of hypoxia inducible factor (HIF), today announced positive top-line results from its Phase 2 study of vadadustat (formerly AKB-6548) in dialysis patients with anemia related to chronic kidney disease (CKD). The study achieved its primary objective, indicating that vadadustat maintained stable hemoglobin (HGB) levels throughout the 16-week treatment period following conversion from recombinant erythropoiesis-stimulating agent (rESA) therapy. Vadadustat demonstrated a favorable safety profile with no drug-related serious adverse events and no deaths. The results highlight the potential of vadadustat, dosed either once daily or three times per week, to safely and predictably manage and sustain HGB levels in CKD patients undergoing dialysis.

“This study was a clear success, demonstrating the potential of vadadustat to effectively and safely treat anemia in dialysis patients switching from injectable rESA therapy”

The open-label, multi-center, 94 patient study was designed to evaluate the ability of vadadustat to maintain hemoglobin levels in patients undergoing hemodialysis who were previously being treated with rESAs. Patients were assigned to one of three dose cohorts: once daily vadadustat at a starting dose of 300mg, once daily vadadustat at a starting dose of 450mg, or vadadustat three times per week in conjunction with the patient’s hemodialysis schedule at a starting dose of 450mg. The study achieved its primary endpoints of maintaining stable hemoglobin levels over 16 weeks of treatment in all three cohorts of patients converting from rESAs to vadadustat.

                                 
            Mean Hemoglobin Levels (g/dL)*       Baseline     Week 7/8     Week 15/16
            300mg Daily Dose       10.4     10.4     10.3
            450mg Daily Dose       10.6     10.3     10.5
            450mg Three Times per Week Dose       10.5     10.2     10.4
           

* Modified intent-to-treat (MITT) population, n=94

             

Vadadustat was well tolerated among patients in all three dose cohorts. Treatment-emergent adverse events (TEAEs) with vadadustat were balanced across the cohorts. Serious adverse events (SAEs) were reported in 13 subjects (13.8%), well within the expected range for this patient population. There were no drug-related SAEs and no deaths reported in the study.

“This study was a clear success, demonstrating the potential of vadadustat to effectively and safely treat anemia in dialysis patients switching from injectable rESA therapy,” said Brad Maroni, M.D., Chief Medical Officer at Akebia. “We are impressed with the consistency in hemoglobin levels across the duration of the study, which highlights the ability of vadadustat to control and maintain hemoglobin levels in this patient population. Furthermore, the results indicate that daily and three times per week dosing regimens are both viable options for patients on dialysis.”

John P. Butler, President and Chief Executive Officer of Akebia, stated, “These results further confirm vadadustat as a potential best-in-class anemia treatment for CKD patients, and reinforce our confidence in this product candidate as we advance toward our Phase 3 program. Adding these results to the 12 other clinical studies we have completed, we are confident in the potential for vadadustat to treat anemia in a broad array of patients with CKD. We are pleased to have successfully completed this stage of our drug development and look forward to initiating Phase 3 studies.”

Complete efficacy and safety data from this Phase 2 study will be presented at an upcoming medical meeting.

About the Phase 2 Study Design of Vadadustat in Dialysis Patients with Anemia Related to CKD

The Phase 2 multi-center, open-label study evaluated 94 patients over 16 weeks of treatment, at 20 dialysis centers in the United States, including an assessment of HGB response to the starting dose of vadadustat during the first 8 weeks, followed by an assessment of HGB response to algorithm-guided dose adjustments of vadadustat during the subsequent 8 weeks of treatment. The study enrolled three cohorts, each consisting of approximately 30 CKD patients with anemia undergoing dialysis who were switched from injectable rESA therapy to vadadustat. Patients in the first two cohorts received once daily doses of vadadustat, while patients in the third cohort received vadadustat three times per week in conjunction with their hemodialysis schedule.

References

  1. Jump up^ Pergola PE, Spinowitz BS, Hartman CS, Maroni BJ, Haase VH. Vadadustat, a novel oral HIF stabilizer, provides effective anemia treatment in nondialysis-dependent chronic kidney disease. Kidney Int. 2016 Nov;90(5):1115-1122. doi:10.1016/j.kint.2016.07.019PMID 27650732.Missing or empty |title= (help)
  2. Jump up^ Gupta N, Wish JB. Hypoxia-Inducible Factor Prolyl Hydroxylase Inhibitors: A Potential New Treatment for Anemia in Patients With CKD. Am J Kidney Dis. 2017 Jun;69(6):815-826. doi:10.1053/j.ajkd.2016.12.011PMID 28242135. Missing or empty |title= (help)
  3. Jump up^ Martin ER, Smith MT, Maroni BJ, Zuraw QC, deGoma EM. Clinical Trial of Vadadustat in Patients with Anemia Secondary to Stage 3 or 4 Chronic Kidney Disease. Am J Nephrol. 2017;45(5):380-388. doi:10.1159/000464476PMID 28343225. Missing or empty |title= (help)
Vadadustat
Vadadustat structure.png
Clinical data
Synonyms AKB-6548, PG-1016548
ATC code
  • None
Identifiers
CAS Number
PubChem CID
ChemSpider
UNII
Chemical and physical data
Formula C14H11ClN2O4
Molar mass 306.701 g/mol
3D model (JSmol)
 
Patent ID Patent Title Submitted Date Granted Date
US9776969 PROCESS FOR PREPARING [(3-HYDROXYPYRIDINE-2-CARBONYL)AMINO]ALKANOIC ACIDS, ESTERS AND AMIDES
2015-08-24
2015-12-17
US2014057892 PROLYL HYDROXYLASE INHIBITORS AND METHODS OF USE
2013-11-04
2014-02-27
US9145366 PROCESS FOR PREPARING [(3-HYDROXYPYRIDINE-2-CARBONYL)AMINO]ALKANOIC ACIDS, ESTERS AND AMIDES
2012-06-05
2012-12-06
US2017258773 SOLID FORMS OF ACETIC ACID, COMPOSITIONS, AND USES THEREOF
2017-05-30
 
US8940773 Prolyl hydroxylase inhibitors and methods of use
2013-10-24
2015-01-27
Patent ID Patent Title Submitted Date Granted Date
US2016339005 COMPOSITIONS AND METHODS FOR TREATING OCULAR DISEASES
2015-01-23
 
US2016143891 COMPOSITIONS AND METHODS FOR TREATING ANEMIA
2014-06-04
2016-05-26
US8323671 PROLYL HYDROXYLASE INHIBITORS AND METHODS OF USE
2010-12-30
 
US9598370 PROLYL HYDROXYLASE INHIBITORS AND METHODS OF USE
2015-09-15
2016-01-14
US2015119425 PROLYL HYDROXYLASE INHIBITORS AND METHODS OF USE
2014-12-12
2015-04-30
 
 
Patent ID Patent Title Submitted Date Granted Date
US8722895 Prolyl hydroxylase inhibitors and method of use
2013-04-09
2014-05-13
US8598210 Prolyl hydroxylase inhibitors and methods of use
2012-11-20
2013-12-03
US8343952 PROLYL HYDROXYLASE INHIBITORS AND METHODS OF USE
2010-12-30
 
US7811595 Prolyl hydroxylase inhibitors and methods of use
2007-12-27
2010-10-12
US2017189387 PROLYL HYDROXYLASE INHIBITORS AND METHODS OF USE
2017-01-31
 

SYN

https://doi.org/10.1021/acs.jmedchem.4c02079
J. Med. Chem. 2025, 68, 2147−2182

Vadadustat (Vafseo). Vadadustat (28) is a hypoxia inducible factor prolyl hydroxylase (HIF-PH) inhibitor
developed by Akebia Therapeutics. It was approved by the European Commission in April 2023, and recently also by the USFDA, for the treatment of symptomatic anemia associated with chronic kidney disease in adults receiving chronic maintenance dialysis. Vadadustat acts by inhibiting HIFPH, 214
which results in increases of endogenous erythropoietin production, red blood cell synthesis, and iron mobilization. 215 While a number of syntheses of vadadustat (28) have been published in previous patents 216−228 and a journal article, 229 Akebia Therapeutics has published two patents regarding the
large-scale preparation of vadadustat (Scheme 52). 218,226 The key intermediate nitrile 28.3 could be accessed in two steps: the neat SNAr reaction between commercially available 2,3,5trichloropyridine (28.1) and 4-DMAP to generate pyridinium salt 28.2, followed by a second SNAr reaction of 28.2 with
NaCN. The Suzuki coupling between 28.3 and 3-chlorophenyl boronic acid (28.4) gave the biaryl 28.5, and the subsequent SNAr reaction of 28.5 with NaOMe replaced the 3-chloro
substitution on the pyridine ring with a methoxy group, generating intermediate 28.6. Global acidic hydrolysis of both methyl ether and nitrile group in 28.6 gave the 3 hydroxypicolinic acid 28.7. Treatment of 28.7 with DIPEA and excess pivaloyl chloride (PivCl) resulted in the formation of mixed anhydride 28.8 with concomitant acylation of the 3 hydroxy group. Without isolation of 28.8, glycine methyl ester
hydrochloride (28.9) was then charged with additional DIPEA to generate the corresponding amide 28.10. The residual amount (∼0.5%) of 28.7 in 28.10 was hard to remove, but this impurity could be effectively rejected with an extra amount of DIPEA during workup and solvent switch. Finally, the Opivaloyl group and methyl ester were both removed via basic hydrolysis, giving vadadustat (28) in about 90% yield from 28.7.

REF 

(215) Pergola, P. E.; Spinowitz, B. S.; Hartman, C. S.; Maroni, B. J.; Haase, V. H. Vadadustat, a novel oral HIF stabilizer, provides effective anemia treatment in nondialysis-dependent chronic kidney disease.
Kidney Int. 2016, 90, 1115−1122.
(216) Lanthier, C. M.; Gorin, B.; Oudenes, J.; Dixon, C. E.; Lu, A. Q.; Copp, J. D.; Janusz, J. M. Preparation of [(3-hydroxypyridine-2carbonyl)amino]alkanoic acids, esters and amides as prolyl hydroxylase
inhibitors. US 20120309977, 2012.
(217) Li, X.; Chen, J. Process for the preparation of vadadustat. CN105837502, 2016.
(218) Gorin, B. I.; Lanthier, C. M.; Luong, A. B. C.; Copp, J. D.; Gonzalez, J. Process for preparing 2-[[5-(3-chlorophenyl)-3-hydroxypyridine-2-carbonyl]amino]acetic acid. WO 2019217550, 2019.
(219) Kou, J.; Li, Y.; Xiao, Q.; Lin, B.; Sun, J.; Wang, Z.; Luo, Z.;Huang, F. Preparation method of vadadustat. CN 110903238, 2020.
(220) Machida, K.; Yasukouchi, H.; Nishiyama, A. Method for producing vadadustat intermediate. WO 2020217733, 2020.
(221) Xiao, Q.; Lin, B.; Kou, J.; Sun, J.; Qiu, X.; Wang, Z.; Luo, Z.;Huang, F. Preparation of vadadustat intermediate. CN 111848505,2020

(222) Xiao, Q.; Lin, B.; Wang, Z.; Kou, J.; Li, Y.; Sun, J.; Jin, L.; Luo,
Z.; Huang, F. Preparation of vadadustat and intermediate thereof. CN
111205222, 2020.
(223) Xiao, Q.; Lin, B.; Wang, Z.; Kou, J.; Luo, Z.; Huang, F.; Li, Y.
Preparation of vadadustat and intermediate thereof. CN 111423367,
2020.
(224) Xiao, Q.; Qiu, X.; Lin, B.; Kou, J.; Li, Y.; Sun, J.; Wang, Z.; Luo,
Z.; Huang, F. Preparation of vadadustat. CN 111320577, 2020.
(225) Xiao, Q.; Lin, B.; Wang, Z.; Kou, J.; Qiu, X.; Cai, X.; Li, Y.; Luo,
Z.; Huang, F. Method for preparing vadadustat and intermediate
thereof. WO 2021179540, 2021.
(226) Jurkauskas, V.; Jung, Y. C.; Kwon, T.; Kannan, A.; Gondi, V. B.
Manufacturing process for 3,5-dichloropicolinonitrile for synthesis of
vadadustat. WO 2022006427, 2022.
(227) Chen, Z.; Zheng, Y.; Zhang, L.; Yu, C.; Liu, L.; He, B.
Preparation of a pyridine compound used for the preparation of
vadadustat. CN 117843565, 2024.
(228) Patel, K. R.; Thakrar, V. H.; Mehta, T. B.; Wagh, A. G.; Patel, J.
A.; Patil, R. R.; Solanki, Y. U.; Ladumor, C. B. A process for the
preparation of Vadadustat or salts thereof. WO 2024079708, 2024.
(229) Lin, B. Y.; Kou, J. P.; Wu, S. M.; Cai, X. R.; Xiao, Q. B.; Li, Y. L.;
Hu, J.; Li, J. B.; Wang, Z. Q. Development of a robust and scalable
process for the large-scale preparation of Vadadustat. Org. Process Res.
Dev. 2021, 25, 960−968.

.

str1

AS ON JUNE2025 4.45 LAKHS VIEWS ON BLOG WORLDREACH AVAILABLEFOR YOUR ADVERTISEMENT

wdt-16

join me on Linkedin

Anthony Melvin Crasto Ph.D – India | LinkedIn

join me on Researchgate

RESEARCHGATE

This image has an empty alt attribute; its file name is research.jpg

join me on Facebook

Anthony Melvin Crasto Dr. | Facebook

join me on twitter

Anthony Melvin Crasto Dr. | twitter

+919321316780 call whatsaapp

EMAIL. amcrasto@gmail.com

……

///////////VADADUSTAT, PHASE 3, AKB-6548, PG-1016548, B-506, AKB 6548, Akebia Therapeutics,  Procter & Gamble Pharmaceuticals,  Mitsubishi Tanabe Pharma, Otsuka, вададустат , فادادوستات , 伐达度司他 , PG1016548, UNII:I60W9520VV, MT-6548  , MT 6548  , APPROVALS 2024, FDA 2024

c1cc(cc(c1)Cl)c2cc(c(nc2)C(=O)NCC(=O)O)O

Tedatioxetine Revisited


Tedatioxetine.svg

Tedatioxetine

TEDATIOXETINE; UNII-5H681S8O3S; Lu AA24530; 508233-95-2;
Molecular Formula: C18H21NS
Molecular Weight: 283.43104 g/mol
4-{2-[(4-Méthylphényl)sulfanyl]phényl}pipéridine
508233-95-2 [RN]
Lu AA24530
Piperidine, 4-[2-[(4-methylphenyl)thio]phenyl]
  • OriginatorLundbeck A/S
  • DeveloperLundbeck A/S; Takeda
  • ClassAntidepressants; Anxiolytics; Piperidines
  • Mechanism of ActionBiogenic monoamine uptake inhibitors; Serotonin 2C receptor antagonists; Serotonin 3 receptor antagonists
  • Generalised anxiety disorder; Major depressive disorder

Most Recent Events

  • 10 May 2016Discontinued – Phase-I for Generalised anxiety disorder in USA, Japan (PO)
  • 10 May 2016Discontinued – Phase-I for Major depressive disorder in USA, Japan (PO)
  • 30 Jul 2015Tedatioxetine is still in phase I trials for Major depressive disorders and Generalised anxiety disorder in USA and Japan

Tedatioxetine (Lu AA24530) is an antidepressant that was discovered by scientists at Lundbeck; in 2007 Lundbeck and Takedaentered into a partnership that included tedatioxetine but was focused on another, more advanced Lundbeck drug candidate,vortioxetine.[1]

Tedatioxetine is reported to act as a triple reuptake inhibitor (5-HT > NE > DA) and 5-HT2A, 5-HT2C, 5-HT3 and α1A-adrenergic receptor antagonist.[2][3][4][5]

As of 2009, it was in phase II clinical trials for major depressive disorder,[5] but there have been no updates since then, and as of August 2013 it was no longer displayed on Lundbeck’s product pipeline.[6][7]

On May 10, 2016, all work on tedatioxetine stopped.[8]

PATENT

WO 2016151328

PATENT

WO 2015090160

Tedatioxetine chemical name 4- (2- (4-methylphenyl group)) phenylpiperidine by Lundbeck developed for the treatment of severe depression, it is a monoamine reuptake inhibitor, a monoamine reuptake transporter inhibitors, 5-HT3 antagonists and 5-HT2c receptor antagonist. For the treatment of major depressive disorder and generalized anxiety, II clinical study in. Tedatioxetine has the following structure:
According to the literature, the current synthesis routes are the following:
WO 2003/029232 discloses Tedatioxetine first preparation method, as shown in the following Scheme,
The method of low yield, the product is not easy purification by column chromatography requires; more important is the preparation of the compound N-Boc- piperidin-4-ol of the need to use butyl lithium, and reaction was carried out at lower temperatures, not conducive to industrial production.
WO 2009109541 provides a, as shown in the above-described method for improved routes following synthetic route,
Bn- replaced with Boc-, dehydroxylation switch to TFA and Et 3 of SiH, yield improved despite increased. But there are many shortcomings.Deficiencies mainly reflected in the following aspects: the compound used in the expensive starting 2-bromo benzene iodine source and a catalyst of palladium and a bidentate phosphine ligand 3, an increase of production cost; preparation of compound needed 4:00 butyl lithium reagent to the more dangerous, the need at a low temperature reaction. This will bring in the production of a big security risk, is not conducive to the operation; when dehydroxylation
Preparation of 2- (4-methyl-phenyl mercapto) phenylpiperidine hydrobromide, to use a lot of trifluoroacetate (15eq), post-processing is too much trouble and the environment have a greater pollution.
Given 4- [2- (4-methylphenyl) phenyl] piperidine and salts thereof possess excellent pharmacological properties, and deficiencies of the prior processes, is necessary to develop a suitable industrial production, easy to operate and environmentally friendly preparation process.

2- (4-methyl-phenylthio) benzaldehyde prepared as in Example 1
Direction of Na 2 CO. 3 stirred mixture (11g, 105mmol) and 30mlDMF added 4-methyl-thiophenol (12.4g, 100mmol), stirred for 20 minutes. To the mixture was slowly added 2-bromobenzaldehyde (18.4g, 100mmol); a pending completion of the addition, under nitrogen, was heated to 100 deg.] C for 6 hours. After completion of the reaction, the reaction solution was cooled to room temperature, 100ml of water was added and stirred for 30 minutes. Filtered, washed with water (30ml) and dried in vacuo to give the filter cake was washed with 20.5g pale green solid; After n-hexane to give 18.5g pale yellow solid was recrystallized from 2- (4-phenylthio) benzaldehyde (mp: 52- 54 ℃), 81% yield. 2- (4-methyl-phenylthio) benzaldehyde Example 2 Preparation of
To the K 2 CO. 3 stirred mixture (15g, 110mmol) and 30mlDMA added 4-methyl-thiophenol (12.6g, 102mmol), stirred for 20 minutes. To the mixture was slowly added 2-chlorobenzaldehyde (14g, 100mmol); a pending completion of the addition, under nitrogen, the reaction was heated to 100 deg.] C for 7 hours. After completion of the reaction, the reaction solution was cooled to room temperature, 100ml of water was added and stirred for 30 minutes. Filtered, washed with water (30ml) and dried in vacuo to give the filter cake was washed with 19.7g pale green solid; After n-hexane to give 17g as a pale yellow solid was recrystallized from 2- (4-phenylthio) benzaldehyde (melting point: 51-53 ℃), a yield of 77.5%
2- (4-methyl-phenylthio) benzaldehyde Example 3 Preparation of
Ask NaOH (4.2g, 105mmol) and stirred 50ml 1,4-dioxane was added 4-methyl-thiophenol (12.4g, 100mmol), stirred for 30 minutes. To the mixture was slowly added 2-iodo-benzaldehyde (23.1g, 100mmol); a pending completion of the addition, under nitrogen, was heated under reflux for 5 hours.After completion of the reaction, the reaction solution was cooled to room temperature, 50ml of water was added, extraction separated; the organic phase was washed with 50ml of ethyl acetate, and the combined organic phases were washed with 20% aqueous ammonium chloride solution and saturated brine, dried over anhydrous magnesium sulfate, filtration and concentration gave 21g viscous liquid, and cooled to solidify; after n-hexane to give 18.1g pale yellow solid was recrystallized from 2- (4-phenylthio) benzaldehyde (m.p.: 53-54 ℃), close rate of 79%.
Example 4 Preparation of 3- [2 (4-methyl) phenyl] pentanedioic acid
1) Preparation of ethyl-2-cyano-3- (2- (4-methyl) phenyl) acrylate
2- (4-methylphenyl thio) benzaldehyde (4g, 17.5mmol), ethyl cyanoacetate (2.4g 21mmol) and toluene (30ml) was added a mixture of glacial acetic acid (5ml) and piperidine (0.3 ml of) stirred for 10 minutes; heated to reflux, and isolating the resulting water trap. Completion of the reaction, cooled to room temperature; the reaction was washed with 30ml water and 30ml saturated sodium bicarbonate solution, dried over anhydrous magnesium sulfate; filtered, and concentrated to give 5.0g yellow liquid (solidifies on cooling), yield 86%. It was used directly in the next reaction without purification.
2) Preparation of Diethyl 2,4-diethyl-3- (2- (4-methyl) phenyl) glutarate
Sodium methoxide (1.9g, 35mmol) and dry THF (30ml) was stirred and cooled to mix 0-5 ℃, was added dropwise diethyl malonate (4.6g, 35mmol), stirred for 15 minutes at room temperature dropwise Bi; dropwise obtained above in step 2-cyano-3- (2- (4-methyl) phenyl) acrylate (5g, 15.4mmol) and dry tetrahydrofuran (40ml) solution; BI dropwise, at room temperature stirred for 13 hours. Completion of the reaction, the reaction mixture was added 150ml20% aqueous ammonium chloride solution, followed by extraction separated; the aqueous phase was extracted with ethyl acetate, the combined organic phase was dried over anhydrous magnesium sulfate; filtered, and concentrated to give 5.4 g of a viscous liquid, yield 78%. It was used directly in the next reaction without purification.
Was added 6N hydrochloric acid (70ml), was heated at reflux for 3 days the material obtained in the above step (5.4 g of); completion of the reaction, slowly cooled to room temperature, added 50ml of ethyl acetate, stirred for 30 minutes to precipitate a solid from the solution, filtered and washed with 20ml washed with ethyl acetate, and dried in vacuo at 50 ℃ 10 hours to give 2.7g of white solid 3- [2 (4-methylphenyl) phenyl] glutaric acid (melting point: 191-195 ℃), in 58% yield.
Example 5 Preparation of 3- [2- (4-phenylthio) phenyl] pentanedioic acid
To ethyl acetoacetate (13g, 100mmol) and piperidine (1.7g, 10mmol) was added a mixture of 2- (4-methyl-phenylthio) benzaldehyde (11.5g, 50mmol), room temperature for 1 day to give a yellow viscous semi-solid, 2.7g of sodium methoxide was added. after stirring for 1 hour cure, stand for 2 days.To the above mixture was added ethanol (180ml) and 40% aqueous sodium hydroxide (140ml) was stirred and heated to reflux for 4-5 hours the reaction. Completion of the reaction the heating was stopped, and after cooling to room temperature, the solvent was distilled off under reduced pressure; the residue after distillation under cooling in an ice water bath, and treated dropwise with concentrated hydrochloric acid (150ml) adjusted to pH 1-2. 300ml ethyl acetate was added, the aqueous phase was extracted with 300ml of ethyl acetate, and the combined organic phases were washed with 300ml water; the organic phase was dried over anhydrous sodium sulfate, filtered, and concentrated to 500ml of the solvent. The residue was cooled to room temperature, stirred for 2 hours. The title compound was isolated by filtration through with ethyl acetate (20ml) and was washed and dried at 50 deg.] C in vacuo overnight to give 21.5g of white solid 3- [2 (4-methylphenyl) phenyl] glutaric acid (melting point: 194-196 ℃) yield 65%.
1HNMR(DMSO‐d6):δ2.28(S,3H),2.54‐2.65(m,4H),4.09‐4.16(m,1H),7.08‐7.17(m,4H),7.21‐7.26(m,3H),7.39(d,J=8.1Hz,1H),12.15(s,2H).ESI‐MS(m/z):353.10[M+Na]+.
Example 6 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-dione
Mixing the compound 3- [2 (4-methyl) phenyl] glutaric acid (10g, 30mmol) and urea (5.4g, 90mmol) prepared in Step stirred and heated to 146 deg.] C for 4 hours ; after completion of the reaction was monitored by TLC, cooled to 80 deg.] C, was slowly added 70ml of water and 70ml of ethanol was stirred for 30 minutes; cooled to room temperature and stirred for 1 hour. The title compound was filtered absolute ethanol (170ml) and recrystallized from 50 deg.] C overnight and dried in vacuo to give 8.0g white solid 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-di -one (mp: 164-166 ℃), yield 86%
1HNMR(CDCl3):δ2.33(S,3H),2..86(dd,J=17.2,4.4Hz,2H),2.69‐2.76 (m,2H),3.99‐4.08(m,1H),7.10‐7.15(m,4H),7.18‐7.30(m,4H),8.78(brs,1H).ESI‐MS(m/z):312.1[M+H]+.
7 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-dione Example
In four of 250ml equipped with a condenser reaction flask was added 3- [2 (4-methyl) phenyl] glutaric acid (10g, 30mmol) and urea (14.4g, 240mmol) and the mixture was stirred and heated to 146 deg.] C for 4 hours; TLC monitoring completion of the reaction, cooled to 100 deg.] C, was slowly added 70ml of water and 70ml of ethanol was stirred for 30 minutes; cooled to room temperature and stirred for 1 hour. The title compound was filtered absolute ethanol (170ml) and recrystallized from 50 deg.] C overnight and dried in vacuo to give 7.8g white solid 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-di -one (mp: 165-166 ℃), yield 84%.
8 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-dione Example
In four of 250ml equipped with a condenser reaction flask was added 3- [2 (4-methyl) phenyl] pentanedioic acid (5g, 15mmol) and urea (1.8g, 30mmol) and the mixture was stirred and heated to 143 deg.] C for 4 hours; cool to 100 deg.] C, was slowly added 35ml of water and 35ml of ethanol was stirred for 30 minutes; cooled to room temperature and stirred for 1 hour. The title compound was filtered absolute ethanol (70ml) and recrystallized from 50 deg.] C overnight and dried in vacuo to give an off-white solid 2.9g of 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-dione (Melting point: 163-166 ℃), a yield of 63%.
9 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-dione Example
The compound prepared in the step of 3- [2 (4-methyl) phenyl] glutaric acid (10g, 30mmol) and urea (3.6g, 60mmol) were mixed and stirred and heated to 146 deg.] C for 4 hours ; after completion of the reaction was monitored by TLC, cooled to 80 deg.] C, was slowly added 70ml of water and 70ml of ethanol was stirred for 30 minutes; cooled to room temperature and stirred for 1 hour. The title compound was filtered, absolute ethanol (45 ml of) and recrystallized from 50 deg.] C overnight and dried in vacuo to give 8.0g white solid 4- [2- (4-methylphenyl) phenyl] piperidine-2,6 dione (melting point: 164-166 ℃), yield 86%.
10 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine-2,6-dione Example
A step of preparing the compound 3- [2 (4-methylphenyl) phenyl] glutaric acid (19.8g, 60mmol) and urea (21.6g, 360mmol) were mixed and stirred and heated to 144 deg.] C for 4 hours; after completion of the reaction was monitored by TLC, cooled to 100 deg.] C, slowly added water 140ml 140ml ethanol and stirred for 30 min; cooled to room temperature and stirred for 1 hour. The title compound was filtered, absolute ethanol (350ml) and recrystallized from 50 deg.] C overnight and dried in vacuo to give a white solid 16.5g of 4- [2- (4-methylphenyl) phenyl] piperidine-2,6 dione (melting point: 164-166 ℃), yield 88%.
Example 11 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine
Tetrahydro lithium aluminum (5.1g, 39mmol) with 140ml of tetrahydrofuran were mixed and stirred ice bath cooled to 8 ℃, under nitrogen, was added dropwise 4- (2-mercapto-methylphenyl) piperidine-2,6-phenyl one (7g) in tetrahydrofuran (140ml) solution, so that the temperature does not exceed 20 ℃; dropping was completed, the reaction at room temperature for 5 hours. The reaction solution was cooled in an ice-water bath, was slowly added dropwise 30ml of water, stirred for 20 minutes. The reaction mixture was added sodium sulfate (20g), stirred for 30 minutes. Filtered and the filtrate was concentrated to give a colorless liquid (4.5g), cooled to solidify to a white solid of 4- [2- (4-methylphenyl) phenyl] piperidine.
Example 12 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine
The reaction flask was added 100ml four 1mol / l borane tetrahydrofuran solution (40ml, 40mmol), cooled to ice bath 5 ℃; under nitrogen was added dropwise 4- (2-mercapto-methylphenyl) piperidine-2-phenyl , 6-dione (3.1g) in tetrahydrofuran (40ml) solution, so that the temperature does not exceed 10 ℃; dropping was completed, the reaction at room temperature for 20 hours. The reaction solution was cooled to 0 deg.] C, and slowly added dropwise 1mol / l HCl (30mL), dropwise finished warming at reflux for 5 hours; of THF was removed and concentrated, 30ml of ethyl acetate and washed with an aqueous solution, a saturated aqueous sodium bicarbonate was added to adjust the pH> 10 , followed by addition of 50ml of ethyl acetate, the organic phase was dried, filtered and concentrated to give 1.8g of a colorless liquid, and cooled to solidify to a white solid of 4- [2- (4-methyl) phenyl] piperidine.
Example 13 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine
The a 2 mol / L the BH 3 .CH 3 the SCH 3 (20 mL) and diethylene glycol dimethyl ether 20ml were mixed and stirred ice bath cooled to 10 ℃, solution of 4- (2-mercapto-methyl-phenyl) phenylpiperidine pyridine 2,6-dione (3.1g) in diethylene glycol dimethyl ether (60ml) solution, so that the temperature does not exceed 20 ℃; dropping was completed, the reaction at room temperature 0.5 hours, then slowly heated to 120 deg.] C for 10 hours. The reaction solution was cooled to 0 deg.] C, and slowly added dropwise 30ml of methanol, a dropping was completed, the mixture was stirred overnight at room temperature; was added 4mol / l HCl / EA (10ml ), was heated to 100 deg.] C for 4 hours; the resulting residue was distilled under reduced pressure was dissolved in 30ml water, saturated aqueous sodium bicarbonate was added to adjust the pH> 10, followed by addition of 50ml of ethyl acetate, the organic phase was dried, filtered and concentrated to give a pale red liquid; after column chromatography (hexane – acetic acid – ethanol 10 : 1.5: 0.5) to give a white solid (0.9g) 4- [2- (4- methylphenylsulfanyl) phenyl] piperidine after purification.
14 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine hydrochloride Example
The step resulting 4- [2- (4-methylphenyl) phenyl] piperidine (4g, 14mmol) was added to absolute ethanol (30ml) and heated to 50 deg.] C to dissolve; 4mol slowly added dropwise / l hydrogen chloride – ethyl acetate solution (4ml), 40 minutes with the reaction temperature; cooled to 5-10 ℃ stirred for 2 hours, filtered through a cake when the ethanol (5ml) and washed with 44 ℃ overnight and dried in vacuo to give 3.2 g of white solid 4- [2- (4-methylphenyl) phenyl] piperidine hydrochloride (melting point: 222-225 ℃), 75% yield.
15 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine hydrochloride Example
4- [2- (4-methylphenyl) phenyl] piperidine (4g, 14mmol) was added to acetone (20ml) and heated to 50 deg.] C to dissolve; 37% was gradually added dropwise concentrated hydrochloric acid ( 1.5ml), 40 minutes with the reaction temperature; cooled with stirring to 5-10 ℃ 2 hours, filtered through a cake of acetone (5ml) and washed with 44 ℃ vacuum dried overnight to give 3.6g of white solid 4- [2- ( 4-methylphenyl) phenyl] piperidine hydrochloride (melting point: 224-227 ℃), in 80% yield.
Example 16 Preparation of 4- [2- (4-methylphenyl) phenyl] piperidine hydrochloride embodiment
Tetrahydro Lithium aluminum (19g, 500mmol) and 200ml of tetrahydrofuran were mixed and stirred at room temperature was added dropwise 4- (2-mercapto-methylphenyl) piperidine-2,6-dione phenyl (31.1g, 100mmol) and tetrahydrofuran ( 200ml) solution, the temperature does not exceed 35 ℃; dropping was completed, the reaction heated under reflux for 3 hours. The reaction solution was cooled in an ice-water bath, was slowly added dropwise 100ml of saturated aqueous sodium sulfate solution, stirred for 60 minutes. The reaction mixture was added ethyl acetate (200ml) and anhydrous magnesium sulphate (50g) was stirred for 60 minutes. Filtered and the filtrate was concentrated to give a colorless liquid. Was added to 80ml of acetone and heated to 40 ℃ dissolved, was added quickly 4mol / l hydrogen chloride – ethyl acetate solution (10ml), seeded, stirred for 20 minutes to precipitate a white solid. 40 ℃, slowly dropping the remaining hydrogen chloride – ethyl acetate solution (20ml). Drop Bi, 5-10 ℃ for 3 hours. The filtered cake in acetone (30ml) and washed with 44 ℃ when dried in vacuo overnight to give 20.8g of white solid 4- [2- (4-methylphenyl) phenyl] piperidine hydrochloride (melting point: 225-228 ℃), yield 66%.
TLC:Rf 0.15(chloroform:methanol=9:1);1HNMR(CDCl3):δ6.83(d,J=8.1Hz,1H),6.74(d,J=1.9Hz,1H),6.68(dd,J=8.1,1.9Hz,1H),4.75(m,1H),3.68(s,3H),3.36(m,1H),3.31(br,2H),3.02‐2.94(m,2H),2.58‐2.52(m,2H),1.94‐1.39(m,12H).

References

External links

Patent ID Date Patent Title
US2010144788 2010-06-10 4- [2- (4-METHYLPHENYLSULFANYD-PHENYL] PIPERIDINE WITH COMBINED SEROTONIN AND NOREPINEPHRINE REUPTAKE INHIBITION FOR THE TREATMENT OF ADHD, MELANCHOLIA, TREATMENT RESISTENT DEPRESSION OR RESIDUAL SYMPTOMS IN DEPRESSION
US2010137366 2010-06-03 4- [2- (4-METHYLPHENYLSULFANYL) PHENYL] PIPERIDINE FOR THE TREATMENT OF IRRITABLE BOWEL SYNDROME (IBS)
US2010105730 2010-04-29 LIQUID FORMULATIONS OF SALTS OF 4-[2-(4-METHYLPHENYLSULFANYL)PHENYL]PIPERIDINE
US7683053 2010-03-23 PHENYL-PIPERAZINE DERIVATIVES AS SEROTONIN REUPTAKE INHIBITORS
US2009264465 2009-10-22 CRYSTALLINE FORMS OF 4- [2- (4-METHYLPHENYLSULFANYL) -PHENYL] PIPERIDINE WITH COMBINED SEROTONIN AND NOREPINEPHRINE REUPTAKE INHIBITION FOR THE TREATMENT OF NEUROPATHIC PAIN
US7148238 2006-12-12 Phenyl-piperazine derivatives as serotonin reuptake inhibitors
US7144884 2006-12-05 Phenyl-piperazine derivatives as serotonin reuptake inhibitors
US7138407 2006-11-21 Phenyl-piperazine derivatives as serotonin reuptake inhibitors
Patent ID Date Patent Title
US2015073018 2015-03-12 CRYSTALLINE FORMS OF 4-[2-(4-METHYLPHENYLSULFANYL)-PHENYL] PIPERIDINE
US8920840 2014-12-30 Enteric tablet
US2014296290 2014-10-02 THERAPEUTIC USES OF COMPOUNDS HAVING AFFINITY TO THE SEROTONIN TRANSPORTER, SEROTONIN RECEPTORS AND NORADRENALIN TRANSPORTER
US2014163043 2014-06-12 PHENYL-PIPERAZINE DERIVATIVES AS SEROTONIN REUPTAKE INHIBITORS
US2013190352 2013-07-25 CRYSTALLINE FORMS OF 4-[2-(4-METHYLPHENYLSULFANYL)-PHENYL] PIPERIDINE WITH COMBINED SEROTONIN AND NOREPINEPHRINE REUPTAKE INHIBITION FOR THE TREATMENT OF NEUROPATHIC PAIN
US8476279 2013-07-02 Phenyl-piperazine derivatives as serotonin reuptake inhibitors
US8110567 2012-02-07 PHENYL-PIPERAZINE DERIVATIVES AS SEROTONIN REUPTAKE INHIBITORS
US2011053978 2011-03-03 THERAPEUTIC USES OF COMPOUNDS HAVING AFFINITY TO THE SEROTONIN TRANSPORTER, SEROTONIN RECEPTORS AND NORADRENALIN TRANSPORTER
US2011054178 2011-03-03 PROCESS FOR THE MANUFACTURE OF [PHENYLSULFANYLPHENYL]PIPERIDINES
US2011039890 2011-02-17 4-[2, 3-Difluoro-6-(2-fluoro-4-methyl-phenylsulfanyl)-phenyl]-piperidine
Tedatioxetine
Tedatioxetine.svg
Tedatioxetine ball-and-stick model.png
Systematic (IUPAC) name
4-{2-[(4-methylphenyl)sulfanyl]phenyl}piperidine
Legal status
Legal status
  • Investigational
Identifiers
CAS Number 508233-95-2 Yes
ATC code none
PubChem CID 9878913
ChemSpider 8054590 Yes
KEGG D10170 
Synonyms Lu AA24530; Lu-AA-24530
Chemical data
Formula C18H21NS
Molar mass 283.43 g/mol

//////////////tedatioxetine, WO 2016151328, Lu AA24530, 508233-95-2

CC1=CC=C(C=C1)SC2=CC=CC=C2C3CCNCC3

Clenbuterol


Clenbuterol.svg

Clenbuterol

image

  • Clenbuterol hydrochloride, NAB-365, Siropent

Clenbuterol, marketed as Dilaterol, Spiropent, Ventipulmin,[1] is a sympathomimetic amine used by sufferers of breathing disorders as a decongestant and bronchodilator. People with chronic breathing disorders such as asthma use this as a bronchodilator to make breathing easier. It is most commonly available as the hydrochloride salt, clenbuterol hydrochloride.[2]

Image result for Clenbuterol

Effects and dosage

Clenbuterol is a β2 agonist with some structural and pharmacological similarities to epinephrine and salbutamol, but its effects are more potent and longer-lasting as a stimulant and thermogenic drug. It causes an increase in aerobic capacity, central nervous system stimulation, blood pressure, and oxygen transportation. It increases the rate at which body fat is metabolized while increasing the body’s basal metabolic rate (BMR). It is commonly used for smooth muscle-relaxant properties as a bronchodilator and tocolytic.

Clenbuterol is also prescribed for treatment of horses, but equine use is usually the liquid form.

Human use

Clenbuterol is approved for use in some countries, free or via prescription, as a bronchodilator for asthma patients.[3]

Image result for Clenbuterol

Legal status

Clenbuterol is not an ingredient of any therapeutic drug approved by the US Food and Drug Administration[3] and is now banned forIOC-tested athletes.[4] In the US, administration of clenbuterol to any animal that could be used as food for human consumption is banned by the FDA.[5][6]

Clenbuterol is a therapeutic drug for asthma and COPD, approved for human use in some countries in Europe (Bulgaria and Russia) and Asia (China).

Image result for clenbuterol before and after

Weight-loss drug

Although often used by bodybuilders during their “cutting” cycles,[citation needed] the drug has been more recently known to the mainstream, particularly through publicized stories of use by celebrities such as Victoria Beckham,[4] Britney Spears, and Lindsay Lohan, [7] for its off-label use as a weight-loss drug similar to usage of other sympathomimetic amines such as ephedrine, despite the lack of sufficient clinical testing either supporting or negating such use.

Image result for clenbuterol side effects on men

Image result for Clenbuterol SYNTHESIS

Image result for Clenbuterol SYNTHESIS

By bromination of 4-amino-3,5-dichloroacetophenone (I) with Br2 in CHCl3 to give 4-amino-3,5-dichloro-alpha-bromoacetophenone (II), m.p. 140-5 C, which is condensed with tert-butylamine (III) in CHCl3 to 4-amino-3,5-dichloro-alpha-tertbutylaminoacetophenone hydrochloride (IV), m.p. 252-7 C; this product is finally reduced with NaBH4 in methanol.

Synthesen von neuen Amino-Halogen-substituierten Phenyl-aminothanolen. Arzneim-Forsch Drug Res 1972, 22, 5, 861-869

CLIP

Synthesis and Characterization of Bromoclenbuterol

Ravi Kumar Kannasani*, Srinivasa Reddy Battula, Suresh Babu Sannithi, Sreenu Mula and Venkata Babu VV

R&D Division, RA Chem Pharma Limited, API, Hyderabad, Telangana, India

*Corresponding Author:
Ravi Kumar Kannasani
R&D Division, RA Chem Pharma Limited
API, Prasanth Nagar, Hyderabad, Telangana, India
Tel: +919000443184
E-mail: kannasani.ravi@rachempharma.com

http://www.omicsonline.org/open-access/synthesis-and-characterization-of-bromoclenbuterol-2161-0444-1000397.php?aid=79341

Citation: Kannasani RK, Battula SR, Sannithi SB, Mula S, Babu VVV (2016) Synthesis and Characterization of Bromoclenbuterol. Med Chem (Los Angeles) 6:546-549. doi:10.4172/2161-0444.1000397

Clenbuterol, it is most commonly available as the hydrochloride salt, clenbuterol hydrochloride. Clenbuterol, marketed as Dilaterol, Spiropent, Ventipulmin, and also generically as clenbuterol, is a sympathomimetic amine used for breathing disorders as a decongestant and bronchodilator. People with chronic breathing disorders such as asthma use this as a bronchodilator to make breathing easier. Clenbuterol is a β2 agonist with some structural and pharmacological similarities to epinephrine and salbutamol, but its effects are more potent and longerlasting as a stimulant and thermogenic drug. It causes an increase in aerobic capacity, central nervous system stimulation, blood pressure, and oxygen transportation. It increases the rate at which body fat is metabolized while increasing the body’s BMR. It is commonly used for smooth muscle-relaxant properties as a bronchodilator and tocolytic. Clenbuterol is also prescribed for treatment of horses, but equine use is usually the liquid form

Clenbuterol Hydrochloride was first synthesized at Thomae; a Boehringer Ingelheim research facility in Biberach, Germany, in 1967. The synthesis of Clenbuterol Hydrochloride was patented in the United States in 1970. After comprehensive clinical trials, Clenbuterol Hydrochloride was approved for the treatment of reversible airway obstruction in Germany in 1976 and later as a veterinary pharmaceutical for the treatment of bronchiolytic disorders in Germany in 1980. Boehringer Ingelheim markets Clenbuterol Hydrochloride as Spirospent for Human Pharmaceuticals and as Ventipulmin for Veterinary Pharmaceuticals. Clenbuterol Hydrochloride is not approved by the Federal Drug Administration for human use in the United States.

As per the available literature [47], clenbuterol hydrochloride was synthesized from 4-amino acetophenone (Scheme 1). Initially 4-amino acetophenone (1) was reacted with chlorine to afford 4-amino-3,5- dichloro acetopheneone (2) which was further reacted bromine to give 1-(4-amino-3,5-dichlorophenyl)-2-bromoethanone (3). The obtained bromo compound was reacted tertiary butyl amine to afford 2-(tertbutylamino)- 1-(4-amino-3,5-dichlorophenyl)ethanone (4), which was further reduced with sodium borohydride to give clenbuterol base (5) and converted in to hydrochloride salt by using alcoholic HCl to get clenbuterol hydrochloride (6).

In the synthesis of clenbuterol hydrochloride, first step was a double chlorination of 4-aminoacetophenone (1) through an electrophillic aromatic substitution reaction to yield 4-amino-3,5- dichloroacetophenone (2). Due to the ortho/para directing, amino group and the meta directing, electron withdrawing, acetyl group, chlorination of 4-aminoacetophenone occurs primarily at the 3 and 5 positions over the 2 and 6 positions. Therefore, under chlorination would produce only the mono chlorinated impurity, 4-amino-3- chloroacetophenone. Under these conditions, over chlorination does not result in the addition of chlorine to the 2 and 6 positions because the amino and acetyl groups do not direct that addition. Even though chlorides are ortho/para directing and direct to the 2 and 6 position, chlorides are also deactivating. After close observation on this chlorination reaction, it was noted that the formed mono chlorinated impurity (Scheme 2) (4-amino-3-chloro acetophenone) caused the formation of process related impurity (bromoclenbuterol) in clenbuerol synthesis.

References for above

Image result for clenbuterol side effects on men

References

  1. Jump up^ Medicine, Center for Veterinary. “FOIA Drug Summaries – NADA 140-973 VENTIPULMIN® SYRUP – original approval”. http://www.fda.gov. Retrieved 2016-03-10.
  2. Jump up^ “874. Clenbuterol (WHO Food Additives Series 38)”. http://www.inchem.org. Retrieved2016-03-10.
  3. ^ Jump up to:a b “Clenbuterol”. Daily Mail. 2009-10-01. Retrieved 2010-04-07
  4. ^ Jump up to:a b Guest, Katy (2007-04-10). “Clenbuterol: The new weight-loss wonder drug gripping Planet Zero”. The Independent. London. Retrieved 2007-04-10.
  5. Jump up^ FDA’s Prohibited Drug List, Food Animal Residue Avoidance & Depletion Program
  6. Jump up^ “Animal Drugs @ FDA”. http://www.accessdata.fda.gov. Retrieved 2016-03-10.
  7. Jump up^ “Clenbuterol Weight Loss Hollywood Secret”. PRBuzz. London. 2012-05-17. Retrieved2012-04-10.
  8. Jump up^ Philip Hersh – Series on Athletics in the GDR
  9. Jump up^ “Krabbe receives IAAF settlement”. BBC News. 2002-04-30.
  10. Jump up^ [1][dead link]
  11. Jump up^ Guillermo Mota of San Francisco Giants gets 100-game drug suspension
  12. Jump up^ Dittmeier, Bobbie (May 7, 2012). “Mota suspended 100 games for positive test”.MLB.com. Major League Baseball. Retrieved May 7, 2012.
  13. Jump up^ Snyder, Whitney (2010-09-30). “Alberto Contador Tests Positive For Banned Substance”. Huffington Post.
  14. Jump up^ Radioshack suspends Li after doping positive
  15. Jump up^ “Three Minor League players suspended”. MLB.com. September 30, 2010.
  16. Jump up^ Macur, Juliet (29 September 2010). “With Positive Test, Contador May Lose Tour Title”.The New York Times. Retrieved 29 September 2010.
  17. Jump up^ CAS Sanction Contador with two year ban in clenbuterol case, cyclingnews.com, 6 February 2012
  18. Jump up^ http://www.tas-cas.org/d2wfiles/document/5649/5048/0/Media20Release20_English_2012.02.06.pdf
  19. Jump up^ “Michael Rogers cleared to race as UCI accepts contaminated meat claim”.theguardian.com. 23 April 2014. Retrieved 24 April 2014.
  20. Jump up^ “FIFA alarmed by use of food supplements”. September 5, 2012.
  21. Jump up^ Clenbuterol found in most players at Under-17 World Cup – ESPN
  22. Jump up^ Boxer Erik Morales banned for two years for failed drug test – BBC Sport
  23. Jump up^ Leafs’ Ashton suspended 20 games for violating PED policy – Article – TSN
  24. Jump up^ swim swam.com
  25. Jump up^ Antidopingový výbor ČR
  26. Jump up^ http://bigstory.ap.org/article/1c81c75a99cc4bbea4d97cbc90d9e6df/yankees-minor-league-pitcher-cedeno-suspended-72-games
  27. Jump up^ Collingwood players Lachie Keeffe and Josh Thomas accept two-year bans for clenbuterol positive test – ABC News (Australian Broadcasting Corporation)
  28. Jump up^ No Cookies | Herald Sun
  29. Jump up^ “Heavyweight champ ‘Big Daddy’ Browne seeking legal advice over banned substance reports”. ABC News. Retrieved 2016-03-22.
  30. Jump up^ “Australia’s first world heavyweight champion boxer Lucas Browne fails drug test”. The Sydney Morning Herald. Retrieved 2016-03-22.
  31. Jump up^ “Raul Mondesi Jr. suspended 50 games for PEDs found in cold medicine”. CBS News. May 10, 2016.
  32. Jump up^ Francisco Vargas issued temporary license after failed drug test – Ring TV
  33. Jump up^ “Clenbuterol – SteroidAbuse .com”. http://www.steroidabuse.com. Retrieved 2016-03-10.
  34. Jump up^ R. Baselt, Disposition of Toxic Drugs and Chemicals in Man, 8th edition, Biomedical Publications, Foster City, CA, 2008, pp. 325–326.
  35. Jump up^ “Horse meat investigation. Advice for consumers”. Enforcement and regulation. Food Standards Agency. Retrieved 19 May 2013.
  36. ^ Jump up to:a b “Clenbuterol”, Food Safety and Inspection Service (FSIS), July 1995, Retrieved 8 April 2015
  37. Jump up^ China bans production, sale of clenbuterol to improve food safety Retrieved 08/22/2012
  38. Jump up^ European Commission Retrieved 08/22/2012
  39. Jump up^ Anti Doping Advisory Notes Retrieved 08/22/2012
  40. Jump up^ “Pigs fed on bodybuilder steroids cause food poisoning in Shanghai”. AFP. 2006-09-19. Retrieved 2006-09-19.
  41. Jump up^ “China: 70 ill from tainted pig organs”. CNN. 2009-02-23. Retrieved 2010-04-30.
  42. Jump up^ Wang Ying (2009-02-23). “70 ill after eating tainted pig organs”. China Daily.
  43. Jump up^ “China to launch one-year crackdown on contaminated pig feed – xinhuanet.com”.Xinhua. 2011-03-28. Retrieved 2011-03-29.
  44. Jump up^ Bottemiller, helena (April 26, 2011). “Amid Scandal, China Bans More Food Additives”.Food Safety News. Retrieved August 22, 2012.
  45. Jump up^ “Import Alert 68-03”. http://www.accessdata.fda.gov. Retrieved 2016-03-10.
  46. Jump up^ Planipart Solution for Injection 30 micrograms/ml: Uses, National Office of Animal Health

External links

Clenbuterol
Clenbuterol.svg
Clenbuterol ball-and-stick model.png

Clenbuterol (top),
and (R)-(−)-clenbuterol (bottom)
Systematic (IUPAC) name
(RS)-1-(4-Amino-3,5-dichlorophenyl)-2-(tert-butylamino)ethan-1-ol
Clinical data
AHFS/Drugs.com International Drug Names
Pregnancy
category
  • C
Routes of
administration
Oral (tablets, oral solution)
Legal status
Legal status
Pharmacokinetic data
Bioavailability 89–98% (orally)
Metabolism Hepatic (negligible)
Biological half-life 36–48 hours
Excretion Feces and urine
Identifiers
CAS Number 37148-27-9 Yes
ATC code R03AC14 (WHO)R03CC13 (WHO)QG02CA91 (WHO)
PubChem CID 2783
DrugBank DB01407 Yes
ChemSpider 2681 Yes
UNII XTZ6AXU7KN Yes
KEGG D07713 Yes
ChEBI CHEBI:174690 Yes
ChEMBL CHEMBL49080 Yes
Chemical data
Formula C12H18Cl2N2O
Molar mass 277.19
Chirality Racemic mixture

///////////

Follow New Drug Approvals on WordPress.com

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 37.9K other subscribers

ORGANIC SPECTROSCOPY

Read all about Organic Spectroscopy on ORGANIC SPECTROSCOPY INTERNATIONAL 

DISCLAIMER

I , Dr A.M.Crasto is writing this blog to share the knowledge/views, after reading Scientific Journals/Articles/News Articles/Wikipedia. My views/comments are based on the results /conclusions by the authors(researchers). I do mention either the link or reference of the article(s) in my blog and hope those interested can read for details. I am briefly summarising the remarks or conclusions of the authors (researchers). If one believe that their intellectual property right /copyright is infringed by any content on this blog, please contact or leave message at below email address amcrasto@gmail.com. It will be removed ASAP