Home » 2020 (Page 5)

Yearly Archives: 2020

Copper Cu 64 dotatate, 銅(Cu64)ドータテート;

September 13, 2020 3:32 am / Leave a comment

Copper dotatate Cu-64.png

2D chemical structure of 1426155-87-4

Figure imgf000004_0001

Copper Cu 64 dotatate

銅(Cu64)ドータテート;

UNII-N3858377KC

N3858377KC

Copper 64-DOTA-tate

Copper Cu-64 dotatate

Copper dotatate Cu-64

Diagnostic (neuroendocrine tumors), Radioactive agent

Formula	C65H86CuN14O19S2. 2H
CAS:	1426155-87-4
Mol weight	1497.1526

FDA APPROVED 2020. 2020/9/3. Detectnet

2-[4-[2-[[(2R)-1-[[(4R,7S,10S,13R,16S,19R)-10-(4-aminobutyl)-4-[[(1S,2R)-1-carboxy-2-hydroxypropyl]carbamoyl]-7-[(1R)-1-hydroxyethyl]-16-[(4-hydroxyphenyl)methyl]-13-(1H-indol-3-ylmethyl)-6,9,12,15,18-pentaoxo-1,2-dithia-5,8,11,14,17-pentazacycloicos-19-yl]amino]-1-oxo-3-phenylpropan-2-yl]amino]-2-oxoethyl]-10-(carboxylatomethyl)-7-(carboxymethyl)-1,4,7,10-tetrazacyclododec-1-yl]acetate;copper-64(2+)

Cuprate(2-)-64Cu, (N-(2-(4,10-bis((carboxy-kappaO)methyl)-7-(carboxymethyl)-1,4,7,10-tetraazacyclododec-1-yl-kappaN1,kappaN4,kappaN7,kappaN10)acetyl)-D-phenylalanyl-L-cysteinyl-L-tyrosyl-D-tryptophyl-L-lysyl-L-threonyl-L-cysteinyl-L-threoni

Copper Cu 64 dotatate, sold under the brand name Detectnet, is a radioactive diagnostic agent indicated for use with positron emission tomography (PET) for localization of somatostatin receptor positive neuroendocrine tumors (NETs) in adults.^[1]

Common side effects include nausea, vomiting and flushing.^[2]

It was approved for medical use in the United States in September 2020.^[1]^[2]

History

The U.S. Food and Drug Administration (FDA) approved copper Cu 64 dotatate based on data from two trials that evaluated 175 adults.^[3]

Trial 1 evaluated adults, some of whom had known or suspected NETs and some of whom were healthy volunteers.^[3] The trial was conducted at one site in the United States (Houston, TX).^[3] Both groups received copper Cu 64 dotatate and underwent PET scan imaging.^[3] Trial 2 data came from the literature-reported trial of 112 adults, all of whom had history of NETs and underwent PET scan imaging with copper Cu 64 dotatate.^[3] The trial was conducted at one site in Denmark.^[3] In both trials, copper Cu 64 dotatate images were compared to either biopsy results or other images taken by different techniques to detect the sites of a tumor.^[3] The images were read as either positive or negative for presence of NETs by three independent image readers who did not know participant clinical information.^[3]

PATENT

https://patents.google.com/patent/WO2013029616A1/en

PATENT

https://patents.google.com/patent/US20140341807

Known imaging techniques with tremendous importance in medical diagnostics are positron emission tomography (PET), computed tomography (CT), magnetic resonance imaging (MRI), single photon computed tomography (SPECT) and ultrasound (US). Although today’s imaging technologies are well developed they rely mostly on non-specific, macroscopic, physical, physiological, or metabolic changes that differentiate pathological from normal tissue.
[0003]
Targeting molecular imaging (MI) has the potential to reach a new dimension in medical diagnostics. The term “targeting” is related to the selective and highly specific binding of a natural or synthetic ligand (binder) to a molecule of interest (molecular target) in vitro or in vivo.
[0004]
MI is a rapidly emerging biomedical research discipline that may be defined as the visual representation, characterization and quantification of biological processes at the cellular and sub-cellular levels within intact living organisms. It is a novel multidisciplinary field, in which the images produced reflect cellular and molecular pathways and in vivo mechanism of disease present within the context of physiologically authentic environments rather than identify molecular events responsible for disease.
[0005]
Several different contrast-enhancing agents are known today and their unspecific or non-targeting forms are already in clinical routine. Some examples listed below are reported in literature.
[0006]
For example, Gd-complexes could be used as contrast agents for MRI according to “Contrast Agents I” by W. Krause (Springer Verlag 2002, page one and following pages). Furthermore, superparamagnetic particles are another example of contrast-enhancing units, which could also be used as contrast agents for MRI (Textbook of Contrast Media, Superparamagnetic Oxides, Dawson, Cosgrove and Grainger Isis Medical Media Ltd, 1999, page 373 and following pages). As described in Contrast Agent II by W. Krause (Springer Verlag 2002, page 73 and following pages), gas-filled microbubbles could be used in a similar way as contrast agents for ultrasound. Moreover “Contrast Agents II” by W. Krause (Springer Verlag, 2002, page 151 and following pages) reports the use of iodinated liposomes or fatty acids as contrast agents for X-Ray imaging.
[0007]
Contrast-enhancing agents that can be used in functional imaging are mainly developed for PET and SPECT.
[0008]
The application of radiolabelled bioactive peptides for diagnostic imaging is gaining importance in nuclear medicine. Biologically active molecules which selectively interact with specific cell types are useful for the delivery of radioactivity to target tissues. For example, radiolabelled peptides have significant potential for the delivery of radionuclides to tumours, infarcts, and infected tissues for diagnostic imaging and radiotherapy.
[0009]
DOTA (1,4,7,10-tetrakis(carboxymethyl)-1,4,7,10tetraazacyclododecane) and its derivatives constitute an important class of chelators for biomedical applications as they accommodate very stably a variety of di- and trivalent metal ions. An emerging area is the use of chelator conjugated bioactive peptides for labeling with radiometals in different fields of diagnostic and therapeutic nuclear oncology.
[0010]
There have been several reports in recent years on targeted radiotherapy with radiolabeled somatostatin analogs.
[0011]
US2007/0025910A1 discloses radiolabled somatostatin analogs primarily based on the ligand DOTA-TOC. The radionucleotide can be (64)Copper and the somatostatin analog may be octreotide, lanreotide, depreotide, vapreotide or derivatives thereof. The compounds of US2007/0025910A1 are useful in radionucleotide therapy of tumours.
[0012]
US2007/0025910A1 does not disclose (64)Cu-DOTA-TATE. DOTA-TATE and DOTA-TOC differ clearly in affinity for the 5 known somatostatin receptors (SST1-SST2). Accordingly, the DOTA-TATE has a 10-fold higher affinity for the SST2 receptor, the receptor expressed to the highest degree on neuroendocrine tumors. Also the relative affinity for the other receptor subtypes are different. Furthermore, since 177Lu-DOTATATE is used for radionuclide therapy, only 64Cu-DOTATATE and not 64Cu-DOTATOC can be used to predict effect of such treatment by a prior PET scan.
[0013]
There exists a need for further peptide-based compounds having utility for diagnostic imaging techniques, such as PET.

Figure US20140341807A1-20141120-C00001

[0033]
Preparation of “Cu-Dotatate-DOTA-TATE
[0034]
⁶⁴Cu was produced using a GE PETtrace cyclotron equipped with a beamline. The ⁶⁴Cu was produced via the ⁶⁴Ni (p,n) ⁶⁴Cu reaction using a solid target system consisting of a water cooled target mounted on the beamline. The target consisted of ⁶⁴Ni metal (enriched to >99%) electroplated on a silver disc backing. For this specific type of production a proton beam with the energy of 16 MeV and a beam current of 20 uA was used. After irradiation the target was transferred to the laboratory for further chemical processing in which the ⁶⁴Cu was isolated using ion exchange chromatography. Final evaporation from aq. HCl yielded 2-6 GBq of ⁶⁴Cu as ⁶⁴CuCl2 (specific activity 300-3000 TBq/mmol; RNP >99%). The labeling of ⁶⁴Cu to DOTA-TATE was performed by adding a sterile solution of DOTA-TATE (0.3 mg) and Gentisic acid (25 mg) in aq Sodium acetate (1 ml; 0.4M, pH 5.0) to a dry vial containing 64CuCl2 (˜1 GBq). Gentisic acid was added as a scavenger to reduce the effect of radiolysis. The mixture was left at ambient temperature for 10 minutes and then diluted with sterile water (1 ml). Finally, the mixture was passed through a 0.22 μm sterile filter (Millex GP, Millipore). Radiochemical purity was determined by RP-HPLC and the amount of unlabeled 64Cu2+ was determined by thin-layer chromatography. All chemicals were purchased from Sigma-Aldrich unless specified otherwise. DOTA-Tyr3-Octreotate (DOTA-TATE) was purchased from Bachem (Torrance, Calif.). Nickel-64 was purchased in +99% purity from Campro Scientific Gmbh. All solutions were made using Ultra pure water (<0.07 μSimens/cm). Reversed-phase high pressure liquid chromatography was performed on a Waters Alliance 2795 Separations module equipped with at Waters 2489 UV/Visible detector and a Caroll Ramsey model 105 S-1 radioactivity detector—RP-HPLC column was Luna C18, HST, 50×2 mm, 2.5 μm, Phenomenex. The mobile phase was 5% aq. acetonitrile (0.1% TFA) and 95% aq. acetonitrile (0.1% TFA).
[0035]
Thin layer chromatography was performed with a Raytest MiniGita Star TLC-scanner equipped with a Beta-detector. The eluent was 50% aq methanol and the TLC-plate was a Silica60 on Al foil (Fluka). Ion exchange chromatography was performed on a Dowex 1×8 resin (Chloride-form, 200-400 mesh).

References

^ Jump up to:^a ^b “FDA approval letter” (PDF). 3 September 2020. Retrieved 5 September 2020. This article incorporates text from this source, which is in the public domain.
^ Jump up to:^a ^b “RadioMedix and Curium Announce FDA Approval of Detectnet (copper Cu 64 dotatate injection) in the U.S.” (Press release). Curium. 8 September 2020. Retrieved 9 September 2020 – via GlobeNewswire.
^ Jump up to:^a ^b ^c ^d ^e ^f ^g ^h “Drug Trials Snapshots: Detectnet”. U.S. Food and Drug Administration (FDA). 3 September 2020. Retrieved 10 September 2020. This article incorporates text from this source, which is in the public domain.

External links

“Copper dotatate Cu-64”. Drug Information Portal. U.S. National Library of Medicine.
“copper Cu 64 dotatate injection safety data sheet” (PDF). Curium US LLC. 15 March 2020.

Coppers Coming | Cu 64 dotatate injection is coming soon The emerging role of copper-64 radiopharmaceuticals as cancer theranostics - ScienceDirect

The emerging role of copper-64 radiopharmaceuticals as cancer theranostics - ScienceDirect

The FDA has approved copper Cu 64 dotatate injection (Detectnet) for the localization of somatostatin receptor–positive neuroendocrine tumors (NETs), according to an announcement from RadioMedix Inc. and Curium Pharma.¹

The positron emission tomography (PET) diagnostic agent is anticipated to launch immediately, according to Curium. Doses will be accessible through several nuclear pharmacies or through the nuclear medicine company.

“Detectnet brings an exciting advancement in the diagnosis of NETs for healthcare providers, patients, and their caregivers,” Ebrahim Delpassand MD, CEO of RadioMedix, stated in a press release. “The phase 3 results demonstrate the clinical sensitivity and specificity of Detectnet which will provide a great aid to clinicians in developing an accurate treatment approach for their [patients with] NETs.”

Copper Cu 64 dotatate adheres to somatostatin receptors with highest affinity for subtype 2 receptors (SSTR2). Specifically, the agent binds to somatostatin receptor–expressing cells, including malignant neuroendocrine cells; these cells overexpress SSTR2. The agent is a positron-producing radionuclide that possesses an emission yield that permits PET imaging.

“Perhaps most exciting is that the 12.7-hour half-life allows Detectnet to be produced centrally and shipped to sites throughout the United States,” added Delpassand. “This will help alleviate shortages or delays that have been experienced with other somatostatin analogue PET agents.”

Two single-center, open-label studies confirmed the efficacy of the diagnostic agent, according to Curium.2 In Study 1, investigators conducted a prospective analysis of 63 patients, which included 42 patients with known or suspected NETs according to histology, conventional imaging, or clinical evaluations, and 21 healthy volunteers. The majority of the participants, or 88% (n = 37) had a history of NETs at the time that they underwent imaging. Just under half of patients (44%; n = 28) were men and the majority were white (86%). Moreover, patients had a mean age of 54 years.

Images produced by the PET agent were interpreted to be either positive or negative for NET via 3 independent readers who had been blinded to the clinical data and other imaging information. Moreover, the results from the diagnostic agent were compared with a composite reference standard that was comprised of 1 oncologist’s blinded evaluation of patient diagnosis based on available histopathology results, reports of conventional imaging that had been done within 8 weeks before the PET imaging, as well as clinical and laboratory findings, which involved chromogranin A and serotonin levels.

Additionally, the percentage of patients who tested positive for disease via composite reference as well as through PET imaging was used to quantify positive percent agreement. Conversely, the percentage of participants who did not have disease per composite reference and who were determined to be negative for disease per PET imaging was used to quantify negative percent agreement.

Results showed that the percent reader agreement for positive detection in 62 scans was 91% (95% CI, 75-98) and negative detection was 97% (95% CI, 80-99). For reader 2, these percentages were 91% (95% CI, 75-98) and 80% (95% CI, 61-92), respectively, for 63 scans. Lastly, the percent reader agreement for reader 3 in 63 scans was 91% (95% CI, 75-98) positive and 90% (95% CI, 72-97) negative.

Study 2 was a retrospective analysis in which investigators examined published findings collected from 112 patients; 63 patients were male, while 43 were female. The mean age of patients included in the analysis was 62 years. All patients had a known history of NETs. Results demonstrated similar performance with the PET imaging agent.

In both safety and efficacy trials, a total of 71 patients were given a single dose of the diagnostic agent; the majority of these patients had known or suspected NETs and 21 were healthy volunteers. Adverse reactions such as nausea, vomiting, and flushing were reported at a rate of less than 2%. In all clinical experience that has been published, a total of 126 patients with a known history of NETs were given a single dose of the PET diagnostic agent. A total of 4 patients experienced nausea immediately after administration.

“Curium is excited to bring the first commercially available Cu 64 diagnostic agent to the US market,” Dan Brague, CEO of Curium, North America, added in the release. “Our unique production capabilities and distribution network allow us to deliver to any nuclear pharmacy, hospital, or imaging center its full dosing requirements first thing in the morning, to provide scheduling flexibility to the institution and its patients. We look forward to joining with healthcare providers and our nuclear pharmacy partners to bring this highly efficacious agent to the market.”

References
1. RadioMedix and Curium announce FDA approval of Detectnet (copper Cu 64 dotatate injection) in the US. News release. RadioMedix Inc and Curium. September 8, 2020. Accessed September 9, 2020. https://bit.ly/3m6iC0q.
2. Detectnet. Prescribing information. Curium Pharma; 2020. Accessed September 9, 2020. https://bit.ly/32eZxS3.

///////////////Copper Cu 64 dotatate, 銅(Cu64)ドータテート , FDA 2020, 2020 APPROVALS, Diagnostic, neuroendocrine tumors, Radioactive agent,

CC(C1C(=O)NC(CSSCC(C(=O)NC(C(=O)NC(C(=O)NC(C(=O)N1)CCCCN)CC2=CNC3=CC=CC=C32)CC4=CC=C(C=C4)O)NC(=O)C(CC5=CC=CC=C5)NC(=O)CN6CCN(CCN(CCN(CC6)CC(=O)[O-])CC(=O)[O-])CC(=O)O)C(=O)NC(C(C)O)C(=O)O)O.[Cu+2]

CILOFEXOR

September 5, 2020 4:53 am / Leave a comment

Cilofexor Chemical Structure

CILOFEXOR

C₂₈H₂₂Cl₃N₃O₅ ,

586.8 g/mol

1418274-28-8

GS-9674, Cilofexor (GS(c)\9674)

UNII-YUN2306954

YUN2306954

2-[3-[2-chloro-4-[[5-cyclopropyl-3-(2,6-dichlorophenyl)-1,2-oxazol-4-yl]methoxy]phenyl]-3-hydroxyazetidin-1-yl]pyridine-4-carboxylic acid

Cilofexor is under investigation in clinical trial NCT02943447 (Safety, Tolerability, and Efficacy of Cilofexor in Adults With Primary Biliary Cholangitis Without Cirrhosis).

Cilofexor (GS-9674) is a potent, selective and orally active nonsteroidal FXR agonist with an EC₅₀ of 43 nM. Cilofexor has anti-inflammatory and antifibrotic effects. Cilofexor has the potential for primary sclerosing cholangitis (PSC) and nonalcoholic steatohepatitis (NASH) research.

Gilead , following a drug acquisition from Phenex , is developing cilofexor tromethamine (formerly GS-9674), the lead from a program of farnesoid X receptor (FXR; bile acid receptor) agonists, for the potential oral treatment of non-alcoholic steatohepatitis (NASH), primary biliary cholangitis/cirrhosis (PBC) and primary sclerosing cholangitis. In March 2019, a phase III trial was initiated for PSC; at that time, the trial was expected to complete in August 2022.

PATENT

Product case WO2013007387 , expiry EU in 2032 and in the US in 2034.

https://patents.google.com/patent/WO2013007387A1/en

Figure imgf000039_0001

PATENT

WO2020150136 claiming 2,6-dichloro-4-fluorophenyl compounds.

PATENT

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2020172075&tab=PCTDESCRIPTION&_cid=P20-KEP1ZU-65392-1

WO-2020172075

Novel crystalline forms of cilofexor as FXR agonists useful for treating nonalcoholic steatohepatitis. Gilead , following a drug acquisition from Phenex , is developing cilofexor tromethamine (formerly GS-9674), the lead from a program of farnesoid X receptor (FXR; bile acid receptor) agonists, for the potential oral treatment of non-alcoholic steatohepatitis (NASH), primary biliary cholangitis/cirrhosis (PBC) and primary sclerosing cholangitis. In March 2019, a phase III trial was initiated for PSC; at that time, the trial was expected to complete in August 2022. Family members of the cilofexor product case WO2013007387 , expire in the EU in 2032 and in the US in 2034.

solid forms of compounds that bind to the NR1H4 receptor (FXR) and act as agonists or modulators of FXR. The disclosure further relates to the use of the solid forms of such compounds for the treatment and/or prophylaxis of diseases and/or conditions through binding of said nuclear receptor by said compounds.

[0004] Compounds that bind to the NR1H4 receptor (FXR) can act as agonists or modulators of FXR. FXR agonists are useful for the treatment and/or prophylaxis of diseases and conditions through binding of the NR1H4 receptor. One such FXR agonist is the compound of Formula I:

[0005] Although numerous FXR agonists are known, what is desired in the art are physically stable forms of the compound of Formula I, or pharmaceutically acceptable salt thereof, with desired properties such as good physical and chemical stability, good aqueous solubility and good bioavailability. For example, pharmaceutical compositions are desired that address

challenges of stability, variable pharmacodynamics responses, drug-drug interactions, pH effect, food effects, and oral bioavailability.

[0006] Accordingly, there is a need for stable forms of the compound of Formula I with suitable chemical and physical stability for the formulation, therapeutic use, manufacturing, and storage of the compound.

[0007] Moreover, it is desirable to develop a solid form of Formula I that may be useful in the synthesis of Formula I. A solid form, such as a crystalline form of a compound of Formula I may be an intermediate to the synthesis of Formula F A solid form may have properties such as bioavailability, stability, purity, and/or manufacturability at certain conditions that may be suitable for medical or pharmaceutical uses.

Description

IC₅₀ & Target

EC50: 43 nM (FXR)^[1]

In Vivo

Cilofexor (GS-9674; 30 mg/kg; oral gavage; once daily; for 10 weeks; male Wistar rats) treatment significantly increases Fgf15 expression in the ileum and decreased Cyp7a1 in the liver in nonalcoholic steatohepatitis (NASH) rats. Liver fibrosis and hepatic collagen expression are significantly reduced. Cilofexor also significantly reduces hepatic stellate cell (HSC) activation and significantly decreases portal pressure, without affecting systemic hemodynamics^[3].

Animal Model:	Male Wistar rats received a choline-deficient high fat diet (CDHFD)^[3]
Dosage:	30 mg/kg
Administration:	Oral gavage; once daily; for 10 weeks
Result:	Significantly increased Fgf15 expression in the ileum and decreased Cyp7a1 in the liver. Liver fibrosis and hepatic collagen expression were significantly reduced.

Clinical Trial

NCT Number	Sponsor	Condition	Start Date	Phase
NCT02943460	Gilead Sciences	Primary Sclerosing Cholangitis	November 29, 2016	Phase 2
NCT02808312	Gilead Sciences	Nonalcoholic Steatohepatitis (NASH)	July 13, 2016	Phase 1
NCT02781584	Gilead Sciences	Nonalcoholic Steatohepatitis (NASH)\|Nonalcoholic Fatty Liver Disease (NAFLD)	July 13, 2016	Phase 2
NCT02943447	Gilead Sciences	Primary Biliary Cholangitis	December 1, 2016	Phase 2
NCT03987074	Gilead Sciences\|Novo Nordisk A+S	Nonalcoholic Steatohepatitis	July 29, 2019	Phase 2
NCT03890120	Gilead Sciences	Primary Sclerosing Cholangitis	March 27, 2019	Phase 3
NCT02854605	Gilead Sciences	Nonalcoholic Steatohepatitis (NASH)	October 26, 2016	Phase 2
NCT03449446	Gilead Sciences	Nonalcoholic Steatohepatitis	March 21, 2018	Phase 2
NCT02654002	Gilead Sciences	Nonalcoholic Steatohepatitis (NASH)	January 2016	Phase 1

Patent ID	Title	Submitted Date
US2019142814	Novel FXR (NR1H4) binding and activity modulating compounds	2019-01-15
US2019055273	ACYCLIC ANTIVIRALS	2017-03-09
US10220027	FXR (NR1H4) binding and activity modulating compounds	2017-10-13
US10071108	Methods and pharmaceutical compositions for the treatment of hepatitis b virus infection	2018-02-19
US2018000768	INTESTINAL FXR AGONISM ENHANCES GLP-1 SIGNALING TO RESTORE PANCREATIC BETA CELL FUNCTIONS	2017-09-06

Patent ID	Title	Submitted Date	Granted Date
US9820979	NOVEL FXR (NR1H4) BINDING AND ACTIVITY MODULATING COMPOUNDS	2016-12-05
US9539244	NOVEL FXR (NR1H4) BINDING AND ACTIVITY MODULATING COMPOUNDS	2015-08-12	2015-12-03
US9895380	METHODS AND PHARMACEUTICAL COMPOSITIONS FOR THE TREATMENT OF HEPATITIS B VIRUS INFECTION	2014-09-10	2016-08-04
US2017355693	FXR (NR1H4) MODULATING COMPOUNDS	2017-06-12
US2016376279	FXR AGONISTS AND METHODS FOR MAKING AND USING	2016-09-12

Patent ID	Title	Submitted Date	Granted Date
US9139539	NOVEL FXR (NR1H4) BINDING AND ACTIVITY MODULATING COMPOUNDS	2012-07-12	2014-08-07
US2018133203	METHODS OF TREATING LIVER DISEASE	2017-10-27

ClinicalTrials.gov

CTID	Title	Phase	Status	Date
NCT03890120	Safety, Tolerability, and Efficacy of Cilofexor in Non-Cirrhotic Adults With Primary Sclerosing Cholangitis	Phase 3	Recruiting	2020-08-31
NCT02781584	Safety, Tolerability, and Efficacy of Selonsertib, Firsocostat, and Cilofexor in Adults With Nonalcoholic Steatohepatitis (NASH)	Phase 2	Recruiting	2020-08-13
NCT03987074	Safety, Tolerability, and Efficacy of Monotherapy and Combination Regimens in Adults With Nonalcoholic Steatohepatitis (NASH)	Phase 2	Completed	2020-07-29
NCT02943460	Safety, Tolerability, and Efficacy of Cilofexor in Adults With Primary Sclerosing Cholangitis Without Cirrhosis	Phase 2	Completed	2020-06-09
NCT02943447	Safety, Tolerability, and Efficacy of Cilofexor in Adults With Primary Biliary Cholangitis Without Cirrhosis	Phase 2	Completed	2020-02-11

ClinicalTrials.gov

CTID	Title	Phase	Status	Date
NCT03449446	Safety and Efficacy of Selonsertib, Firsocostat, Cilofexor, and Combinations in Participants With Bridging Fibrosis or Compensated Cirrhosis Due to Nonalcoholic Steatohepatitis (NASH)	Phase 2	Completed	2019-12-24
NCT02854605	Evaluating the Safety, Tolerability, and Efficacy of GS-9674 in Participants With Nonalcoholic Steatohepatitis (NASH)	Phase 2	Completed	2019-01-29
NCT02808312	Pharmacokinetics and Pharmacodynamics of GS-9674 in Adults With Normal and Impaired Hepatic Function	Phase 1	Completed	2018-10-30
NCT02654002	Study in Healthy Volunteers to Evaluate the Safety, Tolerability, Pharmacokinetics and Pharmacodynamics of GS-9674, and the Effect of Food on GS-9674 Pharmacokinetics and Pharmacodynamics	Phase 1	Completed	2016-07-27

EU Clinical Trials Register

EudraCT	Title	Phase	Status	Date
2019-000204-14	A Phase 3, Randomized, Double-Blind, Placebo-Controlled Study Evaluating the Safety, Tolerability, and Efficacy of Cilofexor in Non-Cirrhotic Subjects with Primary Sclerosing Cholangitis	Phase 3	Restarted, Ongoing	2019-09-11
2016-002496-10	A Phase 2, Randomized, Double-Blind, Placebo-Controlled Study Evaluating the Safety, Tolerability, and Efficacy of GS-9674 in Subjects with Nonalcoholic Steatohepatitis (NASH)	Phase 2	Completed	2017-02-21
2016-002443-42	A Phase 2, Randomized, Double-Blind, Placebo Controlled Study Evaluating the Safety, Tolerability, and Efficacy of GS-9674 in Subjects with Primary Biliary Cholangitis Without Cirrhosis	Phase 2	Completed	2017-01-09
2016-002442-23	A Phase 2, Randomized, Double-Blind, Placebo Controlled Study Evaluating the Safety, Tolerability, and Efficacy of GS-9674 in Subjects with Primary Sclerosing Cholangitis Without Cirrhosis	Phase 2	Completed	2017-01-09

///////////CILOFEXOR, Cilofexor (GS(c)\9674), GS-9674, phase 3

C1CC1C2=C(C(=NO2)C3=C(C=CC=C3Cl)Cl)COC4=CC(=C(C=C4)C5(CN(C5)C6=NC=CC(=C6)C(=O)O)O)Cl

LAZUVAPAGON

September 3, 2020 2:33 am / Leave a comment

LAZUVAPAGON

KRPN-118

CAS 2379889-71-9
Chemical Formula: C27H32N4O3
Molecular Weight: 460.58

(4S)-N-((2S)-1-Hydroxypropan-2-yl)-methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H-1-benzazepine-4-carboxamide

1H-1-Benzazepine-4-carboxamide, 2,3,4,5-tetrahydro-N-((1S)-2-hydroxy-1-methylethyl)-4-methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-, (4S)-

(4S)-N-[(2S)-1-hydroxypropan-2-yl]-methyl-1-[2-methyl-4-(3- methyl-1H-pyrazol-1-yl)benzoyl]-2,3,4,5-tetrahydro-1H-1-benzazepine-4-carboxamide

Vasopressin V2 receptor agonist

Kyorin Pharmaceutical under license from Sanwa Kagaku Kenkyusho , is developing SK-1404 ([14C]-SK-1404, presumed to be lazuvapagon), for the iv treatment of nocturia, and as an oral formulation, as KRPN-118

PATENT

WO2020171055

PATENT

WO2014104209

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2014104209

PATENT

WO-2020171073

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2020171073&tab=FULLTEXT&_cid=P20-KEM6XV-16484-1

Process for preparing benzazepine derivatives, particularly lazuvapagon a V2 receptor agonist, and their intermediates, useful for treating diabetes insipidus, hemophilia and overactive bladder.

[Fifth Step] to [Sixth Step]
[Chemical

Formula 33] [In the formula, R ¹ and R ² have the same meanings as those in the first step, and * represents an asymmetric center. ]

[0074]

　In the fifth step and the sixth step, the reaction can be performed according to a conventional method.
In the fifth step, compound (IX) is treated with a base (eg, sodium hydroxide, potassium hydroxide, etc.) in a suitable solvent (eg, alcohol solvent such as methanol, ethanol, etc., water), usually at room temperature to an organic solvent. A carboxylic acid compound of the compound (X) can be obtained by reacting at a temperature of the boiling point of the solvent for 30 minutes to 1 day. Next, in the sixth step, the obtained carboxylic acid compound is subjected to amidation with L-alaninol to obtain the compound (V). For the amidation, a method using a condensing agent, a method of reacting L-alaninol with a mixed acid anhydride or acid chloride of carboxylic acid, and the like can be used. In the method using a condensing agent, for example, the carboxylic acid compound and L-alaninol are condensed in a suitable organic solvent (chloroform, dimethylformamide, etc.) in the presence of a base (eg, diisopropylethylamine, triethylamine, etc.) (for example, 1 , 3-dicyclohexylcarbodiimide (DCC), 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC), etc.) alone or in combination with 1-hydroxybenztriazole (HOBt). (V) can be obtained. Further, in the method using a mixed acid anhydride, for example, a carboxylic acid derivative in an appropriate organic solvent (eg, dichloromethane, toluene, etc.) in the presence of a base (eg, pyridine, triethylamine, etc.), an acid chloride (eg, pivaloyl chloride, Tosyl chloride, etc.) or an acid derivative (eg, ethyl chloroformate, isobutyl chloroformate, etc.), and the resulting mixed acid anhydride is reacted with L-alaninol usually at 0° C. to room temperature to give compound (V). Can be obtained. Further, in the method of passing through an acid chloride, for example, an acid chloride is obtained by using a chlorinating agent (eg, thionyl chloride, oxalyl chloride, etc.) in a suitable organic solvent (eg, toluene, xylene, etc.) Acid chloride in the presence of a base (eg sodium carbonate, triethylamine etc.) in a suitable organic solvent (eg ethyl acetate, toluene etc.) with L-alaninol,

[0075]

　Compound (V) can also exist as a solvate. The solvate of compound (V) can be obtained by a conventional method for producing a solvate. Specifically, it can be obtained by mixing the compound (V) with a solvent while heating if necessary, and then cooling and crystallizing the mixture while stirring or standing. It is desirable that the cooling be carried out while adjusting the cooling rate if necessary in consideration of the influence on the quality of crystal, grain size and the like. For example, cooling at a cooling rate of 20 to 1° C./hour is preferable, and cooling at a cooling rate of 10 to 3° C./hour is more preferable. As the organic solvent used in these methods, alcohol solvents such as methanol, ethanol, propanol, isopropanol, normal propanol, and tertiary butanol are preferable. The amount of the organic solvent used is preferably 3 to 20 times by weight, more preferably 5 to 10 times by weight, of the compound (V).

PATENT

WO-2020171055

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2020171055&tab=FULLTEXT&_cid=P20-KEM6S2-14698-1

The present inventors have investigated the method described in Patent Document 1 by using N-[(S)-1-hydroxypropan-2-yl]-4-methyl-1-[2-methyl-4-(3-methyl-1H). -Pyrazol-1-yl)benzoyl]-2,3,4,5-tetrahydro-1H-benzo[b]azepine-4-carboxamide chiral compound was prepared and analyzed. As a result, the compound was amorphous (amorphous). Solid). Amorphous is known to be a thermodynamically non-equilibrium metastable state and generally has high solubility and dissolution rate, but is low in stability and is often unfavorable in terms of drug development. Therefore, an object of the present invention is to increase the applicability as a drug substance to (S)-N-[(S)-1-hydroxypropan-2-yl]-4 represented by the formula (I). -Methyl-1-[2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl]-2,3,4,5-tetrahydro-1H-benzo[b]azepine-4-carboxamide It is to provide an alcohol solvate or a crystal thereof.
[Chemical 1]

[Reference Example 1] Compound (I) (amorphous)
Compound (I) was produced by the following method.
[Chemical 5]

[0046]

(First Step)
1-(2-Methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-5-oxo-2,3,4,5-tetrahydro-1H-benzo[b] Azepine-4-carboxylic acid ethyl ester was treated with methyl bromide in the presence of (R,R)-3,5-bistrifluoromethylphenyl-NAS bromide, cesium carbonate and cesium fluoride in a mixed solvent of benzene bromide and water. By carrying out methylation using (R)-4-methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-5-oxo-2,3,4 ,5-Tetrahydro-1H-benzo[b]azepine-4-carboxylic acid ethyl ester was obtained.

[0047]

(Second Step)
(R)-4-Methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-5-oxo-2,3,4,5- Reduction of the ketone portion of tetrahydro-1H-benzo[b]azepine-4-carboxylic acid ethyl ester with a borane-ammonia complex prepared from sodium borohydride and ammonium sulfate in a toluene solvent gave (4R)-5. -Hydroxy-4-methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H-benzo[b]azepine- 4-Carboxylic acid ethyl ester was obtained.

[0048]

(Third Step)
(4R)-5-hydroxy-4-methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5- By chlorinating the hydroxyl group of tetrahydro-1H-benzo[b]azepine-4-carboxylic acid ethyl ester with phosphorus oxychloride in the presence of pyridine in a toluene solvent, (4S)-5-chloro-4-methyl-1 -(2-Methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H-benzo[b]azepine-4-carboxylic acid ethyl ester was obtained. It was

[0049]

(Step 4)
(4S)-5-chloro-4-methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5- By stirring tetrahydro-1H-benzo[b]azepine-4-carboxylic acid ethyl ester in a methanol solvent in the presence of 10% palladium-carbon under slightly pressurized conditions of hydrogen gas, (S)-4-methyl- 1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H-benzo[b]azepine-4-carboxylic acid ethyl ester Obtained.

[0050]

(Fifth Step)
(S)-4-Methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H- Benzo[b]azepine-4-carboxylic acid ethyl ester is hydrolyzed with 30% sodium hydroxide in a solvent of water and methanol to give (S)-4-methyl-1-(2-methyl-4-( 3-Methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H-benzo[b]azepine-4-carboxylic acid was obtained.

[0051]

(Sixth Step)
(S)-4-Methyl-1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H- Benzo[b]azepine-4-carboxylic acid was converted to an acid chloride form using thionyl chloride in a toluene solvent. This acid chloride and L-alaninol are reacted in a mixed solvent of ethyl acetate and water in the presence of sodium carbonate to give (S)-N-((S)-1-hydroxypropan-2-yl)-4-methyl. -1-(2-methyl-4-(3-methyl-1H-pyrazol-1-yl)benzoyl)-2,3,4,5-tetrahydro-1H-benzo[b]azepine-4-carboxamide (compound ( I)) was obtained.

[0052]

　FIG. 7 shows the powder X-ray diffraction spectrum of the compound (I) obtained in the first to sixth steps. No clear peak was observed in the X-ray diffraction pattern, and the compound (I) of Reference Example 1 was found to be amorphous.

[0053]

[Example 1] Isopropanol solvate
of compound (I) To 5.0 g of amorphous compound (I) of Reference Example 1, 65 mL of isopropanol was added, and the mixture was stirred at room temperature for 30 minutes. After the precipitated suspension was dissolved by heating, it was allowed to cool to room temperature and stirred overnight at 5°C. The suspension was filtered, washed with chilled isopropanol and dried at 40° C. overnight to give 4.9 g of a white solid.

[0054]

　When the obtained compound was analyzed by a thermogravimetric apparatus, the content of isopropanol was 8.2% with respect to the compound (I), and the molar ratio was 0.7 times the amount with respect to the compound (I). It was

[0055]

　The powder X-ray diffraction spectrum and the infrared absorption spectrum of the compound obtained in Example 1 are shown in FIG. 1 and FIG. 2, respectively. The characteristic peaks shown in Table 1 were shown as the diffraction angle (2θ) or as the interplanar spacing d. The obtained compound was crystalline.

[0056]

[table 1]

FIG. 2 shows an infrared absorption spectrum of the compound obtained in Example 1.

/////////////LAZUVAPAGON, KRPN-118

CC1=NN(C=C1)C2=CC(=C(C=C2)C(=O)N3CCC(CC4=CC=CC=C43)(C)C(=O)NC(C)CO)C

MOLINDONE, молиндон موليندون 吗茚酮

August 27, 2020 3:03 am / Leave a comment

ChemSpider 2D Image | Molindone | C16H24N2O2

MOLINDONE

C₁₆H₂₄N₂O_{2,, 276.374}

SPN 810, SPN 801M, AFX 2201

cas 15622-65-8 hcl

Molindone is used for the management of the manifestations of psychotic disorders.

Schizophrenia

молиндон

موليندون

吗茚酮

(±)-Molindone

2376

3-Ethyl-2-methyl-5-(4-morpholinylmethyl)-1,5,6,7-tetrahydro-4H-indol-4-one [ACD/IUPAC Name]

3-Ethyl-2-methyl-5-(morpholin-4-ylmethyl)-1,5,6,7-tetrahydro-4H-indol-4-one

4H-Indol-4-one, 3-ethyl-1,5,6,7-tetrahydro-2-methyl-5-(4-morpholinylmethyl)-

7416-34-4 [RN]

RT3Y3QMF8N

UNII:RT3Y3QMF8N

Supernus Pharmaceuticals , under license from Afecta Pharmaceuticals , is developing molindone hydrochloride (SPN-810; SPN-801M; AFX-2201; presumed to be Zalvari), as a capsule formulation, for the potential oral treatment of conduct disorder in patients with attention deficit hyperactivity disorder. In 3Q15, the company initiated two phase III trials (CHIME 1 and CHIME 2) for compulsive aggression in ADHD. In November 2019, the trial was expected to complete in June 2020.

Molindone, sold under the brand name Moban, is an antipsychotic which is used in the United States in the treatment of schizophrenia.^[1]^[2] It works by blocking the effects of dopamine in the brain, leading to diminished symptoms of psychosis. It is rapidly absorbed when taken orally.

It is sometimes described as a typical antipsychotic,^[3] and sometimes described as an atypical antipsychotic.^[4]

Molindone was discontinued by its original supplier, Endo Pharmaceuticals, on January 13, 2010.^[5]

Availability and Marketing in the USA

After having been produced and subsequently discontinued by Core Pharma in 2015-2017, Molindone is available again from Epic Pharma effective December, 2018.^[6]

Adverse effects

The side effect profile of molindone is similar to that of other typical antipsychotics. Unlike most antipsychotics, however, molindone use is associated with weight loss.^[4]^[7]

Chemistry

Synthesis

Molindone synthesis: SCHOEN KARL, J PACHTER IRWIN; BE 670798 (1965 to Endo Lab).

Condensation of oximinoketone 2 (from nitrosation of 3-pentanone), with cyclohexane-1,3-dione (1) in the presence of zinc and acetic acid leads directly to the partly reduced indole derivative 6. The transformation may be rationalized by assuming as the first step, reduction of 2 to the corresponding α-aminoketone. Conjugate addition of the amine to 1 followed by elimination of hydroxide (as water) would give ene-aminoketone 3. This enamine may be assumed to be in tautomeric equilibrium with imine 4. Aldol condensation of the side chain carbonyl group with the doubly activated ring methylene group would then result in cyclization to pyrrole 5; simple tautomeric transformation would then give the observed product. Mannich reaction of 6 with formaldehyde and morpholine gives the tranquilizer molindone (7).

US-20200262788

Process for preparing molindone and its intermediates useful for treating schizophrenia..

Molindone is chemically known as 4H-Indol-4-one, 3-ethyl-1,5,6,7-tetrahydro-2-methyl-5-(4-morpholinylmethyl) and represented by formula I. Molindone is indicated for management of schizophrenia and is under clinical trial for alternate therapies.

The compound molindone, process for its preparation and its pharmaceutically acceptable salts are disclosed in U.S. Pat. No. 3,491,093. Another application WO 2014042688 discloses methods of producing molindone. Since there are very limited methods for preparation of molindone reported in literature there exist a need for alternate process for preparation of molindone. The present invention provides novel process for preparation of Molindone (I) and its salts.

EXAMPLES

Example 1: Preparation of methyl 2-chloro-2-ethyl-3-oxobutanoate

A mixture of methyl acetoacetate (100 g), potassium tertiary butoxide (101.5 g) and tetrahydrofuran (400 ml) was stirred and a solution of ethyliodide (141 g) in tetrahydrofuran (200 ml) was added to it. The reaction mixture was stirred at 60° C. for about 15 hours. Water (250 ml) was added to the reaction mixture at 25° C. followed by addition of dichloromethane (500 ml). The organic layer was separated and concentrated. To the concentrate was added dichloromethane (1000 ml) and sulfuryl chloride (93.7 g) and the solution was stirred for about 18 hours at 25-30° C. Water (500 ml) was added to the reaction mixture. The organic layer was separated and concentrated to give the title compound.

Example 2: Preparation of 3-chloropentan-2-one

A mixture of methyl 2-chloro-2-ethyl-3-oxobutanoate (98.8 g) and water (240 ml) was treated with sulfuric acid (260 g) and stirred for 90 minutes at 75-80° C. The reaction mixture was poured into water (500 ml) and dichloromethane (500 ml). The organic layer was separated and concentrated. The concentrate was subjected to fractional distillation and pure compound was collected.

Example 3: Preparation of 3-chloropentan-2-one

A mixture of petane-2-one (15 g), acetic acid (60 ml) and N-chlorosuccinimide (24.4 g) was stirred for about 18 hours at 80-85° C. The reaction mixture was cooled and dichloromethane (100 ml) was added to it. The mixture was treated with sodium bicarbonate solution. The organic layer was separated and concentrated to give the title compound (2).

Example 4: Preparation of 2-(2-oxopentan-3-yl)cyclohexane-1,3-dione (4)

A mixture of 3-bromopentan-2-one (17 g), cyclohexane-1,3-dione (11.5 g), triethyl amine (15.6 g) and acetonitrile (100 ml)) was stirred for about 2 hours at 55-60° C. The reaction mixture was concentrated and ethyl acetate (170 ml) and water (85 ml) was added. The organic layer separated and concentrated. The residue was subjected to column chromatography (ethylacetate: cyclohexane). The title compound was obtained. ¹H NMR (500 MHz, CDCl ₃), δ 5.14 (S 1H), δ 4.37 (d 1H), δ 2.50-2.55 (m 2H) δ 2.35-2.38 (m 2H), δ 2.16 (s 3H), δ 2.00-2.05 (m 2H) δ 1.88-1.90 (m 2H), δ 1.00-1.02 (m 3H); ¹³C NMR (500 MHz, CDCl ₃), 206.04, 199.34, 176.63, 103.70, 77.12, 36.62, 28.88, 25.44, 21.00, 16.55, 9.41 ppm; Dept135 NMR (500 MHz, CDCl ₃): 103.70, 83.78, 36.62, 28.87, 28.65, 25.45, 24.69, 21.00, 9.41 ppm; Mass: [M+1]=197.

Example 5: Preparation of 2-methyl-3-ethyl-4-oxo-4,5,6,7-tetrahydroindole (5)

A mixture of 2-(2-oxopentan-3-yl)cyclohexane-1,3-dione (10 g), acetic acid (40 ml) and ammonium acetate (19.6 g) was stirred for about 3 hours at 95-100° C. The reaction mixture was cooled and concentrated. To the residue a mixture of ethyl acetate (60 ml) and water (50 ml) was added. The organic layer separated and concentrated to give the title compound.

Example 6: Preparation of 2-methyl-3-ethyl-4-oxo-4,5,6,7-tetrahydroindole (5)

A mixture of cyclohexane-1,3-dione (3 g), dimethyl sulfoxide (15 ml), triethyl amine (2.7 g) and 3-chloropentan-2-one (3.2 g) was stirred for about 24 hours at 40-45° C. Aqueous ammonia (15 ml) was added to the mixture and stirred for about 10 hours at 25-30° C. A mixture of water (60 ml) and ethyl acetate (30 ml) was added to it. The organic layer separated and concentrated. The residue was subjected to column chromatography (ethyl acetate/n-hexane). The title compound was obtained.

Example 7: Preparation of Molindone Hydrochloride

A mixture of 2-methyl-3-ethyl-4-oxo-4,5,6,7-tetrahydroindole (5 g), morpholine (4.42 g), paraformaldehyde (1.52 g) and ethanol (70 ml) was stirred for about 24 hours at 75-80° C. The reaction mixture was concentrated and water (50 ml) was added to the residue. The mixture was treated with concentrated hydrochloric acid followed by aqueous ammonia in presence of ethyl acetate. The organic layer was separated and concentrated to obtain molindone as a residue. Isopropanol hydrochloride was added to the residue and stirred for 30 minutes at 25-30° C. The solution was concentrated and ethyl acetate (15 ml) was added. The solid was filtered, washed with ethyl acetate and dried to obtain molindone hydrochloride.

References

^ “molindone”. F.A. Davis Company.
^ “Molindone”.
^ Aparasu RR, Jano E, Johnson ML, Chen H (October 2008). “Hospitalization risk associated with typical and atypical antipsychotic use in community-dwelling elderly patients”. Am J Geriatr Pharmacother. 6 (4): 198–204. doi:10.1016/j.amjopharm.2008.10.003. PMID 19028375.
^ Jump up to:^a ^b Bagnall A, Fenton M, Kleijnen J, Lewis R (2007). Bagnall A (ed.). “Molindone for schizophrenia and severe mental illness”. Cochrane Database Syst Rev (1): CD002083. doi:10.1002/14651858.CD002083.pub2. PMID 17253473.
^ https://www.fda.gov/Drugs/DrugSafety/DrugShortages/ucm050794.htm
^ “NEWS”. http://www.epic-pharma.com. Retrieved 2018-12-12.
^ Allison DB, Mentore JL, Heo M, et al. (1999). “Antipsychotic-induced weight gain: a comprehensive research synthesis”. Am J Psychiatry. 156 (11): 1686–96. doi:10.1176/ajp.156.11.1686 (inactive 2020-01-22). PMID 10553730. Free full text

Molindone
Clinical data

Pronunciation	/moʊˈlɪndoʊn/ moh-LIN-dohn
Trade names	Moban
AHFS/Drugs.com	Consumer Drug Information
MedlinePlus	a682238
Pregnancy category	C
Routes of administration	By mouth (tablets)
ATC code	N05AE02 (WHO)
Legal status
Legal status	US: ℞-only
Pharmacokinetic data
Metabolism	Hepatic
Elimination half-life	1.5 hours
Excretion	Minor, renal and fecal
Identifiers
IUPAC name [show]
CAS Number	7416-34-4
PubChem CID	23897
IUPHAR/BPS	207
DrugBank	DB01618
ChemSpider	22342
UNII	RT3Y3QMF8N
KEGG	D08226
ChEMBL	ChEMBL460
CompTox Dashboard (EPA)	DTXSID9023332
ECHA InfoCard	100.254.109
Chemical and physical data
Formula	C₁₆H₂₄N₂O₂
Molar mass	276.380 g·mol⁻¹
3D model (JSmol)	Interactive image
SMILES [hide] O=C2c1c(c([nH]c1CCC2CN3CCOCC3)C)CC
InChI [hide] InChI=1S/C16H24N2O2/c1-3-13-11(2)17-14-5-4-12(16(19)15(13)14)10-18-6-8-20-9-7-18/h12,17H,3-10H2,1-2H3 Key:KLPWJLBORRMFGK-UHFFFAOYSA-N

//////////MOLINDONE, SPN 810, SPN 801M, AFX 2201, молиндон, موليندون , 吗茚酮 ,

TILDACERFONT

August 19, 2020 4:28 am / Leave a comment

TILDACERFONT


Synonyms:	Tildacerfont 1014983-00-6 3-(4-Chloro-2-morpholin-4-yl-thiazol-5-yl)-7-(1-ethyl-propyl)-2,5-dimethyl-pyrazolo[1,5-a]pyrimidine 7-(1-ethyl-propyl)-3-(4-chloro-2-morpholin-4-yl-thiazol-5-yl)-2,5-dimethyl-pyrazolo[1,5-a]pyrimidine
MW/ MF	420 g/mol/ C₂₀H₂₆ClN₅OS

Originator Spruce Biosciences
Class2 ring heterocyclic compounds; Morpholines; Pyrazoles; Pyrimidines; Small molecules; Thiazoles
Mechanism of Action Corticotropin receptor antagonists

Orphan Drug Status Yes – Congenital adrenal hyperplasia
New Molecular Entity Yes

Phase II Congenital adrenal hyperplasia

09 Jul 2020 Spruce Biosciences initiates a phase II trial in Congenital adrenal hyperplasia in USA (PO) (NCT04457336)
24 Sep 2019 Spruce Biosciences completes a phase II trial in Congenital adrenal hyperplasia in USA (NCT03687242)
19 Sep 2019 Updated safety and efficacy data from a phase II trial in Congenital adrenal hyperplasia release by Spruce Biosciences

Deuterated pyrazolo[1,5-a]pyrimidine derivatives, particularly tildacerfont (SPR-001), useful as CRF antagonists for treating congenital adrenal hyperplasia. Spruce Bioscience is developing tildacerfont under license from Lilly as an oral capsule formulation for the treatment of congenital adrenal hyperplasia; in July 2017, a phase II trial for CAH was initiated.

Corticotropin releasing factor (CRF) is a 41 amino acid peptide that is the primary physiological regulator of proopiomelanocortin (POMC) derived peptide secretion from the anterior pituitary gland. In addition to its endocrine role at the pituitary gland, immunohistochemical localization of CRF has demonstrated that the hormone has a broad extrahypothalamic distribution in the central nervous system and produces a wide spectrum of autonomic, electrophysiological and behavioral effects consistent with a neurotransmitter or neuromodulator role in the brain. There is also evidence that CRF plays a significant role in integrating the response in the immune system to physiological, psychological, and immunological stressors.

PATENT

Product case, WO2008036579 ,

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2008036579

Example 16
3-(4-Chloro-2-morpholin-4-yl-thiazol-5-yl)-7-(l-ethyl-propyl)-2,5-dimethyl- pyrazolo [ 1 ,5 -α]pyrimidine

Under a nitrogen atmosphere dissolve 3-(4-bromo-2-morpholin-4-yl-thiazol-5-yl)-7-(l-ethyl-propyl)-2,5-dimethyl-pyrazolo[l,5-α]pyrimidine (116 mg, 0.25 mmol) in THF (1.5 mL) and chill to -78 ⁰C. Add n-butyl lithium (0.1 mL. 2.5 M in hexane, 0.25 mmol) and stir at -78 ⁰C for 30 min. Add N-chlorosuccinimide (33.4 mg, 0.25 mmol) and stir for another 30 min, slowly warming to room temperature. After stirring overnight, quench the reaction by adding a solution of saturated ammonia chloride and extract with ethyl acetate. Wash the organic layer with brine, dry over sodium sulfate, filter, and concentrate to a residue. Purify the crude material by flash chromatography, eluting with hexanes:dichloromethane: ethyl acetate (5:5:2) to provide the title compound (54 mg). MS (APCI) m/z (³⁵Cl) 420.6 (M+l)⁺; ¹H NMR (400 MHz, CDCl₃): 6.44 (s, IH), 3.79 (t, 4H, J=4.8 Hz), 3.63-3.56 (m, IH), 3.47 (t, 4H, J=4.8 Hz), 2.55 (s, 3H), 2.45 (s, 3H), 1.88-1.75 (m, 4H), 0.87 (t, 6H, J=7.5 Hz).
Alternate Preparation from Preparation 6:
Combine 7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-α]pyrimidine, (9 g,

26.2 mmol) and 4-chloro-2-morpholino-thiazole (7.5 g, 36.7 mmol) in
dimethylformamide (90 mL) previously degassed with nitrogen. Add cesium carbonate (17.8 g, 55 mmol), copper iodide (250 mg, 1.31 mmol), triphenylphosphine (550 mg, 2.09 mmol) and palladium acetate (117 mg, 0.52 mmol). Heat the mixture to 125 ⁰C for 16 h and then cool to 22 ⁰C. Add water (900 mL) and extract with methyl-?-butyl ether (3 x 200 mL). Combine the organic portions and evaporate the solvent. Purify by silica gel chromatography eluting with hexanes/ethyl acetate (4/1) to afford the title compound (6.4 g, 62%). ES/MS m/z (³⁵Cl) 420 (M+l)⁺.

Example 16a
3-(4-Chloro-2-morpholin-4-yl-thiazol-5-yl)-7-(l-ethyl-propyl)-2,5-dimethyl- pyrazolo[l,5-α]pyrimidine, hydrochloride
Dissolve 3-(4-chloro-2-morpholin-4-yl-thiazol-5-yl)-7-(l-ethyl-propyl)-2,5-dimethyl-pyrazolo[l,5-α]pyrimidine (1.40 g, 3.33 mmol) in acetone (10 mL) at 50 ⁰C and cool to room temperature. Add hydrogen chloride (2 M in diethyl ether, 2.0 mL, 4.0 mmol) and stir well in a sonicator. Concentrate the solution a little and add a minimal amount of diethyl ether to crystallize the HCl salt. Cool the mixture in a refrigerator overnight. Add additional hydrogen chloride (2 M in diethyl ether, 2.0 mL, 4.0 mmol) and cool in a refrigerator. Filter the crystalline material and dry to obtain the title compound (1.15 g, 75%). ES/MS m/z (³⁵Cl) 420 (M+l)⁺; ¹H NMR(CDCO): 9.18 (br, IH), 6.86 (s, IH), 3.72 ( m, 4H), 3.49(m, IH), 3.39 (m, 4H), 2.48 (s, 3H), 2.38(s, 3H), 1.79 (m, 4H), 0.79 (m, 6H).

PATENT

US-20200255436

https://patentscope.wipo.int/search/en/detail.jsf?docId=US301567348&tab=PCTDESCRIPTION&_cid=P22-KE0UZI-30504-1

PATENT

WO2019210266

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2019210266

claiming the use of CRF-1 antagonists (eg tildacerfont).

PATENT

WO 2010039678

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2010039678

EXAMPLES

Example 1 : 7-(l-ethyl-propyl)-3-(^‘2,4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolori ,5-alpyrimidine nthroline

Charge 7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine (1.03 g, 3.00 mmoles), K₃PO₄ (1.95 g, 9.00 mmoles), 2,4-dichlorothiazole (0.58 g, 3.75 mmoles), 1,10 phenanthroline (0.05 g, 0.30 mmoles) and anhydrous DMAC (5 mL) to a round bottom flask equipped with a magnetic stir bar, thermal couple and N₂ inlet. Degas the yellow heterogeneous reaction mixture with N2 (gas) for 30 min. and then add CuI (0.06 g, 0.30 mmoles) in one portion followed by additional 30 min. degassing with N₂ (gas). Stir the reaction mixture at 120 ⁰C for about 6 hr. Cool the reaction mixture to room temperature overnight, add toluene (10 mL) and stir for 1 hr. Purify the mixture through silica gel eluting with toluene (10ml). Extract with 1 M HCl (10 mL), water (10 mL), brine (10 mL) and concentrate under reduced pressure to give a yellow solid. Recrystallize the solid from methanol (5ml) to yield the title compound as a yellow crystalline solid. (0.78 g, 70% yield, >99% pure by LC) MS(ES) = 369 (M+ 1). ¹H NMR (CDCl₃)= 6.5 (IH, s); 3.6 (IH, m); 2.6 (3H, s); 2.5 (3H, s); 1.9 (4H, m); 0.9 (6H, t).

Example 2: 7-(l-ethyl-propyl)-3-(4-chloro-2-morpholin-4-yl-thiazol-5-yl)-2,5-dimethyl-pyrazolol^“! ,5-aipyrimidine

Charge 7-(l-ethyl-propyl)-3-(2,4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine (0.37 g, 1.00 mmoles), K₂CO₃ (0.28 g, 2.00 mmoles) and anhydrous morpholine (3 mL) to a round bottom flask equipped with a magnetic stir bar and N₂ inlet. Stir the yellow mixture at 100 ⁰C for about 4 hr., during which time the reaction becomes homogeneous. Cool the reaction mixture to room temperature, add H₂O (10 mL) and stir the heterogeneous reaction mixture overnight at room temperature. Collected the yellow solid by filtration, wash with H₂O and allowed to air dry overnight to give the crude title compound (391mg). Recrystallize from isopropyl alcohol (3 mL) to yield the title compound as a light yellow crystalline solid (380 mg, 90.6% yield, >99% by LC). MS(ES) = 420 (M+l). ¹H NMR (CDCl₃)= 6.45 (IH, s); 3.81 (m, 4H); 3.62 (IH, m); 3.50 (m, 4H); 2.6 (3H, s); 2.45 (3 H, s); 1.85 (4H, m); 0.9 (6H, t).

Example 3 :

The reactions of Example 1 are run with various other catalysts, ligands, bases and solvents, which are found to have the following effects on yield of 7-(l-ethyl-propyl)-3-(2,4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine. (See Tables 1 – 4).

Table 1 : Evaluation of different li ands

(Reactions are carried out in parallel reactors with 1.2 mmol 2,4-dichlorothiazole, 1 mmol 7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine, 0.5 mmol CuI, 0.5 mmol ligand and 2.1 mmol Cs₂CO₃ in 4 mL DMAC. The reactions are degassed under N₂ for 30 min. and then heated at between 80 and

100⁰C overnight under N₂. Percent product is measured as the percent of total area under the HPLC curve for the product peak. Longer reaction times are shown in parenthesis) Table 2: Evaluation of various solvents

(Reactions are carried out in parallel reactors with 1.2 mmol 2,4-dichlorothiazole 1 mmol 7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine, 0.25 mmol CuI, 0.25 mmol 1,10-phenanthroline and 2.1 mmol Cs₂CO₃ in 3 mL specified solvent. The reactions are degassed under N₂ for 30 minutes and then heated at 100⁰C overnight under N₂. Percent product is measured as the percent of total area under the HPLC curve for the product peak.)

Table 3 : Evaluation of different copper sources

(Reactions are carried out in in parallel reactors with 1 mmol 2,4-dichlorothiazole 1 mmol 7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine, 0.05 mmol CuX, 0.01 mmol 1,10-phenanthroline and 3 equivalents K₃PO₄ in 3 mL DMAC. The reactions are degassed under N₂ for 30 minutes and then heated at 100⁰C overnight under N₂. Percent product is measured as the percent of total area under the HPLC curve for the product peak.)

Table 4: Evaluation of various inorganic bases

(Reactions are carried out in in parallel reactors with 1 mmol 2,4-dichlorothiazole 1 mmol 7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine, 0.1 mmol CuI, 0.1 mmol 1,10-phenanthroline and 2.1 mmol base and degassed for 30 minutes prior to the addition of 3 mL DMAC. The reactions are degassed under N₂ for 10 minutes and then heated at 100⁰C overnight under N₂. Percent product is measured as the percent of total area under the HPLC curve for the product peak.)

Example 4. Use of morpholine both as a reactant and base in 2-MeTHF as solvent.

solvent

7-(l-ethyl-propyl)-3-(2,4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-ajpyrimidine (15.2 g, 41.16 mmoles) is charged into a 250 mL 3-necked round bottomed flask, followed by addition of 2-MeTHF (61 mL, 4.0 volumes), the yellowish brown slurry is stirred at about 20 ⁰C for 5 min. Then morpholine (19 g, 218.18 mmoles) is added over 2-5 minutes. Contents are heated to reflux and maintained at reflux for 12 hr. The slurry is cooled to 25 ⁰C, followed by addition of 2-MeTHF (53 mL, 3.5 volumes) and water ( 38 mL 2.5 volumes). The reaction mixture is warmed to 40 ⁰C, where upon a homogenous solution with two distinct layers formed. The layers are separated, the organic layer is filtered and concentrated to ~3 volumes at atmospheric pressure. Four volumes 2-propanol (61 mL) are added. The solution is concentrated to ~3 volumes followed by addition of 4 volumes 2-propanol (61 mL), re-concentrated to ~3 volumes, followed by addition of another 6 volumes 2-propanol (91 mL), and refluxed for 15 min. The clear solution is gradually cooled to 75 ⁰C, seeded with 0.45 g 7-(l-ethyl-propyl)-3-(4-chloro-2-morpholin-4-yl-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine slurried in 2 mL 2-propanol, rinsed with an additional 2 mL 2-propanol and transferred to a crystallization flask. The slurry is cooled to between 0-5 ⁰C, maintained for 1 hr, filtered and the product rinsed with 2-propanol (30 mL, 2 volumes). The solid is dried at 60 ⁰C in a vacuum oven to afford 16.92 g 7-(l-ethyl-propyl)-3-(4-chloro-2-morpholin-4-yl-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine. Purity of product by HPLC assay is 100.00 %. XRPD and DSC data of product is consistant with reference sample. MS(ES) = 420 (M+ 1).

Example 5. Use of morpholine as both reactant and base in 2-propanol as solvent.

7-(l-ethyl-propyl)-3-(2,4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-ajpyrimidine (11.64 mmoles) is charged into a 100 mL 3 -necked round bottomed flask followed by addition of 2-propanol ( 16 mL, 3.72 volumes). The yellowish brown slurry is stirred at about 20 ⁰C for 5 min. Then morpholine (3.3 g, 37.84 mmoles) is added over 2-5 minutes. Contents are refluxed for 6 hr. The slurry is cooled to 25 ⁰C. 2-Propanol ( 32 mL, 7.44 volumes) and water ( 8.6 mL, 2.0 volumes) are added and the mixture warmed to 70-75 ⁰C, filtered and concentrated to ~ 9 volumes at atmospheric pressure. The clear solution is gradually cooled to 55 ⁰C, seeded with 0.06 g of crystalline 7-(l-ethyl-propyl)-3-(4-chloro-2-morpholin-4-yl-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine slurried in 0.5 mL 2-propanol, rinsed with additional 0.5 mL 2-propanol and added to crystallization flask. The slurry is cooled to 0-5 ⁰C, maintained for 1 hr., filtered and the product rinsed with 2-propanol ( 9 mL, 2.1 volumes). Suctioned dried under vacuum at 60 ⁰C to afford 4.6 g of dry 7-(l-ethyl-propyl)-3-(4-chloro-2-morpholin-4-yl-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine (88.8 % yield, purity by HPLC assay is 99.88 % ). MS(ES) = 420 (M+ 1).

Example 6: 7-(l-ethyl-propyl)-3-(2,4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolori ,5-alpyrimidine

7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine (10 g, 29.17 mmoles), 2, 4-dichlorothiazole (5.2 g , 33.76 mmoles), cesium carbonate(19.9g, 61.07 mmoles) and 1,10-phenanthroline (1 g, 5.5 mmoles) are charged into a 250 mL 3-necked round bottomed flask, followed by 2-MeTHF (36 mL, 3.6 volumes). The reaction mixture is degassed with nitrogen and then evacuated. Cuprous chloride (0.57 g, 5.7 mmoles), DMAC (10 mL, 1 volume) and 2-MeTHF (4 mL, 0.4 volumes) are added in succession. The reaction mixture is degassed with nitrogen and then evacuated. The contents are refluxed for 20 hr. The reaction mixture is cooled to -70 ⁰C and 2-MeTHF (100 mL, 10 volumes) is added. The contents are filtered at ~70 ⁰C and the residual cake is washed with 2-MeTHF (80 mL, 8 volumes) at about 65-72°C. The filtrate is transferred into a separatory funnel and extracted with water. The organic layer is separated and washed with dilute HCl. The resulting organic layer is treated with Darco G60, filtered hot (60⁰C). The filtrate is concentrated at atmospheric pressure to -2.8 volumes. 25 mL 2-propanol is added, followed by re-concentration to -2.8 volumes. An additional 25 mL 2-propanol is added, followed again by re-concentration to -2.8 volumes. Finally, 48 mL 2-propanol is added. The contents are cooled to -7 ⁰C, maintained at -7 ⁰C for 1 hr., filtered and rinsed with 20 mL chilled 2-propanol. Product is suction dried and then vacuum dried at 60 ⁰C to afford 9.41 g 7-(l-ethyl-propyl)-3-(2,4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine (purity of product by HPLC assay is 95.88 %). MS(ES) = 369 (M+ 1).

Example 7. Synthesis of 7-(l-ethyl-propyl)-3-(2, 4-dichloro-thiazol-5-yl)-2,5-dimethyl-pyrazolori,5-a1pyrimidine using 1,4-Dioxane solvent and CuCl catalyst

Add dioxane (9.06X), Cs₂CO₃ (2.00X), 7-(l-ethyl-propyl)-3-iodo-2,5-dimethyl-pyrazolo[l,5-a]pyrimidine (1.0 equivalent), 2,4-dichlorothiazole (0.54 equivalent) to a reactor under N₂. Purge the reactor with N₂ three times, degas with N₂ for 0.5-1 hr., and then add 1,10-phenanthroline (0.3 eq) and CuCl (0.3eq) under N₂ , degassing with N₂ for 0.5-1 hr. Heat the reactor to 100⁰C -110⁰C under N₂ . Stir the mixture for 22-24 hr. at 100 ⁰C -110⁰C. Cool to 10~20°C and add water (10V) and CH₃OH (5V), stir the mixture for 1-1.5 hr. at 10~20°C. Filter the suspension, resuspend the wet cake in water, stirr for 1-1.5 hr. at 10~20°C, and filter the suspension again. Charge the wet cake to n-heptane (16V) and EtOAc (2V) under N₂. Heat the reactor to 40 °C~50⁰C under N₂.

Active carbon (0. IX) is added at 40 °C~50⁰C. The reactor is heated to 55°C~65⁰C under N₂ and stirred at 55 °C~65⁰C for 1-1.5 hr. The suspension is filtered at 40~55°C through diatomite (0.4 X). The cake is washed with n-heptane (2.5V). The filtrate is transferred to another reactor. EtOAc (10V) is added and the the organic layer washed with 2 N HCl (10V) three times, followed by washing two times with water (10X, 10V). The organic layer is concentrated to 3-4V below 50⁰C. The mixture is heated to 80-90 ⁰C. The mixture is stirred at this temperature for 40-60 min. The mixture is cooled to 0~5°C, stirred for 1-1.5 hr. at 0~5°C and filtered. The cake is washed with n-heptane (IV) and vacuum dried at 45-50⁰C for 8-10 hr. The crude product is dissolved in 2-propanol (7.5V) under N₂, and re-crystallized with 2-propanol. The cake is dried in a vacuum oven at 45°C~50°C for 10-12 hr. (55-80% yield). ¹H NMR56.537 (s, IH) 3.591-3.659 (m, IH, J=6.8Hz), 2.593 (s, 3H), 2.512 (s, 3H), 1.793-1.921(m, 4H), 0.885-0.903 (m, 6H).

REFERENCES

1: Zorrilla EP, Logrip ML, Koob GF. Corticotropin releasing factor: a key role in the neurobiology of addiction. Front Neuroendocrinol. 2014 Apr;35(2):234-44. doi: 10.1016/j.yfrne.2014.01.001. Epub 2014 Jan 20. Review. PubMed PMID: 24456850; PubMed Central PMCID: PMC4213066.

/////////////tildacerfont, SPR 001, Orphan Drug Status, Congenital adrenal hyperplasia, SPRUCE BIOSCIENCES, PHASE 2

CCC(CC)C1=CC(=NC2=C(C(=NN12)C)C3=C(N=C(S3)N4CCOCC4)Cl)C

SULCARDINE SULPHATE

August 13, 2020 5:02 am / 1 Comment on SULCARDINE SULPHATE

ChemSpider 2D Image | HBI-3000 | C24H33N3O4S

sulcardine, HBI-3000

B 87823

Molecular FormulaC₂₄H₃₃N₃O₄S
Average mass459.602 Da

N-[[4-hydroxy-3,5-bis(pyrrolidin-1-ylmethyl)phenyl]methyl]-4-methoxybenzenesulfonamide

Benzenesulfonamide, N-[[4-hydroxy-3,5-bis(1-pyrrolidinylmethyl)phenyl]methyl]-4-methoxy-

N-[4-Hydroxy-3,5-bis(1-pyrrolidinylmethyl)benzyl]-4-methoxybenzenesulfonamide

343935-60-4 [RN]

heart arrhythmia

Sulcardine sulfate,343935-61-5 (Sulcardine sulfate)

CAS No. : 343935-61-5 (Sulcardine sulfate)

Synonyms:	B-87823; HBI-3000; B87823; HBI3000; B 87823; HBI 3000;N-(4-hydroxy-3,5-bis(pyrrolidin-1-ylmethyl)benzyl)-4-methoxybenzenesulfonamide sulfate
Molecular Formula:	C24H35N3O8S2
Molecular Weight:	557.67

Originator Jiangsu Furui Pharmaceuticals; Shanghai Institute of Materia Medica
Developer HUYA Bioscience International; Jiangsu Furui Pharmaceuticals
Class Antiarrhythmics; Small molecules
Mechanism of ActionIon channel antagonists

Phase I Atrial fibrillation
No development reported Arrhythmias

13 Mar 2020 Chemical structure information added
28 Feb 2020 No recent reports of development identified for preclinical development in Arrhythmias in USA (IV)
16 Dec 2019 Adverse events data from a phase I trial in Atrial fibrillation (In volunteers) presented at the American Heart Association Scientific Sessions 2019 (AHA-2019)

HUYA Bioscience , under license from Shanghai Institute of Materia Medica (SIMM), is developing sulcardine (HBI-3000, oral, i.v, heart arrhythmia), a myocardial ion channel inhibitory compound, for the treatment of arrhythmia; In September 2016, the drug was still in phase II development, as of August 2020, the company website states that a phase II trial was pending in China.

HBI-3000 (sulcardine sulfate) is an experimental drug candidate that is currently in phase II of human clinical trials as an antiarrhythmic agent.^[1]^{[needs update]} Clinical investigation will test the safety and efficacy of HBI-3000 as a treatment for both atrial and ventricular arrhythmias.^[2]

The molecular problem

Anti-arrhythmic medication is taken to treat irregular beating of the heart. This irregular beating results from a deregulation of the initiation or propagation of the electrical stimulus of the heart. The most common chronic arrhythmia is atrial fibrillation.^[3] There is an increased incidence of atrial fibrillation in the elderly and some examples of complications include heart failure exacerbation, hypotension and thrombembolic events.^[3]

Most anti-arrhythmic medications exert their effects by decreasing the permeability of potassium ion channels (IKr) in heart cells. These potassium channel blockers delay ventricular repolarization and prolong action potential duration (APD; the prolongation of the electrical stimulus within heart cells). These changes can lower heart rate, eliminate atrial fibrillation, and ultimately sudden cardiac death.^[4]^[5]

Mechanism of action in ventricular myocytes

Ventricular myocytes are heart muscle cells found in the lower chambers of the heart. Heart rate is dependent on the movement of an electrical stimulus through the individual heart cells. This is mediated by the opening of ion channels on cell surfaces. HBI-3000 exerts its effects on the heart by inhibiting multiple ion channels (INa-F, INa-L, ICa-L and IKr), but predominantly the INa-L ion channel . By decreasing the ion permeability of these channels, HBI-3000 slightly prolongs APD (due to IKr); however, unlike pure IKr channel blockers, it is self-limited (due to the decreased permeability of INa-L and ICa-L). This is similar to the medications ranolazine and amiodarone.^[5] HBI-3000 suppresses early afterdepolarizations (EADs; a change in the normal net flow of ions during repolarization), does not produce any electrical abnormalities, and displays minimally pronounced prolongation of APD during a slow heart rate (i.e. stimulated at a slower frequency). Pronounced prolongation of APD during a slow heart rate can lead to proarrythmias. Overall, HBI-3000 seems to have a low proarrhythmic risk. The effect of HBI-3000 on contractility and cardiac conduction requires further investigation.^[5]

Studies

Animal model

In a canine model, the intravenous injection of HBI-3000 demonstrated to be an effective anti-arrhythmic and anti-fribrillatory agent.^[6]

Cellular isolation

The administration of HBI-3000 to isolated heart muscle cells demonstrated the potential to improve arrhythmias while having low proarrhythmic risk.^[5]

Human studies

Jiangsu Furui Pharmaceuticals Co., Ltd is currently recruiting participants in their study.^[1]^[

PAPER

Acta Pharmacologica Sinica 2012

Discovery of N-(3,5-bis(1-pyrrolidylmethyl)-4-hydroxybenzyl)-4-methoxybenzenesulfamide (sulcardine) as a novel anti-arrhythmic agent

D. Bai, Wei-zhou Chen, +6 authors Y. Wang

http://www.simm.cas.cn/wyp/wyp_lw/201804/W020180420480084769998.pdf

N-[3,5-bis(1-pyrrolidylmethyl)-4-hydroxybenzyl]-4-methoxybenzenesulfamide (sulcardine, 6f) and the sulfate (sulcardine sulfate) (1) To a suspension of 4-hydroxybenzylamine (133 g, 1.08 mol) in DMF (500 mL) was added dropwise 4-methoxybenzensul-fonyl chloride (206 g, 1.00 mol) in DMF (320 mL) over a period of 30 min at 0–10 °C with stirring, followed by the addition of triethylamine (158 mL, 1.12 mol) over 30 min at the same temperature. The stirring was continued for an additional 1.5 h at room temperature. The reaction mixture was poured into ice-water (5 L). After stirring for 10 min, the suspension was allowed to stand for 2 h. The solid was filtered, washed with water (300 mL×3), and dried in a desiccator over anhydrous calcium chloride, yielding N-(4-hydroxybenzyl)-4-methoxybenzenesulfamide (11) (248 g, 85%) as a white solid, mp 160–162 °C. The authentic sample was obtained by recrystallization from ethyl acetate, mp 161–162 °C. 1 H NMR (CD3OD) δ 3.70 (s, 3H), 3.76 (s, 2H), 6.48 (d, J=8.4 Hz, 2H), 6.82(d, J=8.4 Hz, 2H), 6.86 (d, J=8.7 Hz, 2H), 7.56 (d, J=8.7 Hz, 2H). EIMS (m/z): 293 (M+ ), 254, 195, 185, 171, 155, 149, 122 (100), 107, 99, 77, 65. Anal. (C14H15NO4S) C, H, N.

(2) A mixture of 11 (230 g, 0.78 mmol), pyrrolidine (200 mL, 2.44 mol) and 36% aqueous formaldehyde (250 mL, 3.30 mol) in ethanol (800 mL) was stirred under reflux for 8 h. The reaction mixture was concentrated under vacuum to dryness. The resulting oil residue was dissolved in chloroform (350 mL), and the solution was washed with water (300 mL×3). Under stirring, the organic layer was mixed with water (300 mL), and then concentrated hydrochloric acid (approximately 165 mL) was added portionwise at 0-10 °C to adjust the pH of the aqueous phase to ~2. The aqueous phase was washed with chloroform (200 mL) and then mixed with additional chloroform (300 mL). Under stirring, the two-phase mixture was treated portionwise with 25%–28% aqueous ammonia (~300 mL) to adjust the pH of the aqueous phase to 9–10. The organic layer was separated, and the aqueous layer was further extracted with chloroform (200 mL×2). The combined organic layer was dried over anhydrous sodium sulfate and concentrated under vacuum to dryness. The oily residue was treated with acetone (45 mL) and isopropyl ether (290 mL), and the mixture was heated under reflux until the suspension became a solution. The solution was cooled to room temperature, seeded with an authentic sample, and allowed to stand at 0°C overnight. The solid was filtered and dried under vacuum, yielding product 6f (290 g, 81%) as a yellowish solid, mp 96–98 °C. The authentic sample was obtained by preparative TLC or column chromatography (silica gel; CHCl3:MeOH:25% NH4OH=92:7:1). The compound could be recrystallized from ethanol-water, mp 101–102 °C. 1 H NMR (CDCl3) δ 1.77–1.86 (m, 8H), 2.53–2.63 (m, 8H), 3.68 (s, 4H), 3.86 (s, 3H), 3.97 (s, 2H), 6.86 (s, 2H), 6.95 (d, J=8.7 Hz, 2H), 7.78 (d, J=8.6 Hz 2H). EIMS (m/z): 459 (M+ ), 390, 388, 202, 171, 148, 107, 84, 70 (100). Anal. (C24H33N3O4S) C, H, N.

(3) Under stirring, the Mannich base 6f (150.5 g, 0.327 mol) was mixed with 2 mol/L H2SO4 (172 mL, 0.344 mol), and the mixture was heated at 80 °C until the solid dissolved. The solution was cooled to room temperature, seeded with an authentic sample, and the sulfate of 6f was formed as crystals. To the stirred mixture was added anhydrous ethanol (520 mL), and the mixture was allowed to stand at 0°C for 24 h. The solid was filtered, washed with ethanol, and recrystallized with 80% ethanol (250 mL). The sulfate was dried over concentrated sulfuric acid in a desiccator, giving the sulfate of 6f (143 g, 71%) as a trihydrate, mp 125–140°C. 1 H NMR (D2O) δ 2.00–2.13 (m, 4H), 2.14–2.25 (m, 4H), 3.12–3.22 (m, 4H), 3.45– 3.55 (m, 4H), 3.90 (s, 3H), 4.20 (s, 2H), 4.33 (s, 4H), 7.06 (d, J=8.7 Hz, 2H), 7.28 (s, 2H), 7.66 (d, J=8.9 Hz, 2H). 13C NMR (D2O) δ 24.7, 47.6, 55.7, 56.1, 58.1, 116.6, 122.5, 131.3, 132.3, 133.3, 136.0, 155.8, 164.8. EIMS (m/z): 459, 390, 388, 202, 171, 148, 107, 84, 70 (100). Anal. (C24H33N3O4S∙H2SO4∙3H2O) C, H, N, S.

PATENT

Preparation of sulcardine sulfate salt has been reported in U.S. Patent No. 6,605,635.

https://patents.google.com/patent/US6605635

Synthesis and antiarrhythmic activities of changrolin (1) have been reported (Liangquan Li, et al., Scientia Sinica, 1979, 7, 723; Weizhou Chen, et al., Acta Pharmaceutica Sinica, 1979, 14, 710). Thereafter, investigations of the chemical structural modifications and the physiological activities have successively been carried out by domestic and foreign scientists (Cunji Sun, et al., Acta Pharmaceutica Sinica, 1981, 16, 564; 1986, 21, 692; Mulan Lin, et al., ibid., 1982, 17, 212; D. M. Stout, et al. J. Med. Chem., 1983, 26, 808; 1984, 27, 1347; 1985, 28, 295; 1989, 32, 1910; R. J. Chorvat, et al., ibid., 1993, 36, 2494).

Changrolin is an effective antiarrhythmic agent. Ventricular premature beats disappear 2-3 days after oral administration of changrolin to patients suffering from arrhythmia; I.v. injection or instillaton may result in significant reduction or even disappearence of ventricular premature beats and ventricular tachycardia. However, oral administration of changrolin for a period of over one month may cause a reversible pigmentation on the skin of patients, which gradually retrogresses after ceasing the administration. This pigmentation is associated to the subcutaneous oxidation of certain structural moieties in changrolin molecule or to its instability in solution.

EXAMPLE 1N-[3,5-bis(1-Piperidinomethyl)-4-hydroxy]phenyl-1-naphthalenesulfonamide (B-87836)

(1) To a solution of 4-aminophenol (4.5 g) in dioxane (20 ml) was added dropwise a solution of 1-naphthalenesulfonyl chloride (4.4 g) in dioxane (20 ml). The mixture was further stirred at room temperatue for 4.5 hours and poured into water. The precipitate was collected by filtration, recrystallized from ethanol and decolored with activated carbon to give N-(ρ-hydroxyphenyl)-1-naphthalenesulfonamide (4.2 g), mp 195-196° C.

(2) A mixture of N-(ρ-hydroxyphenyl)-1-naphthalenesulfonamide (2.0 g), 37% aqueous formaldehyde (4.5 g) and piperidine (5.6 g) in ethanol (100 ml) was heated to reflux for 50 hours. The ethanol was removed by evaporation in vacuo and chloroform was added to the residue. The organic layer was washed with water then dried over anhydrous Na₂SO₄. Then the chloroform was removed in vacuo and the residue was triturated in water to give a solid, which was then recrystallized from ethanol to give the titled product (1.4 g), mp 197-198° C.

¹HNMR(CDCl₃): 1.30-1.50(m, 12H), 2.10-2.21(m, 8H), 3.28(s, 4H), 6.45(s, 2H), 7.24-8.04(m, 6H), 8.56(m, 1H). Elemental analysis (C₂₈H₃₅N₃O₃S ): Calcd. (%): C, 68.12; H, 7.15; N, 8.51. Found (%): C, 67.96; H, 7.16; N, 8.56.

PATENT

WO-2020159959

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2020159959&tab=PCTDESCRIPTION&_cid=P11-KDSBL9-99100-1

Novel crystalline forms of acid salts of sulcardine useful for treating arrhythmia and atrial fibrillation.

4-Methoxy-N-(3,5-bis-(l-pyrrolidinylmethyl)-4-hydroxybenzyl)benzene sulfonamide (or N-(4-hydroxy-3,5-bis(pyrrolidin-l-ylmethyl)benzyl)-4-methoxybenzenesulfonamide), also known as sulcardine, and its salts, such as sulcardine sulfate, constitute a group of compounds with potent anti -arrhythmic activity. Sulcardine is a multi-ion channel blocker that specifically inhibits iNa-Peak, iNa-Late, Ica,L, and Ixrwith similar in vitro potencies (and Ito and IK_UT to a lesser degree) in human atrial cardiomyocytes and represents what may be the sole example of a substituted sulfonamide class of anti-arrhythmic. Sulcardine salts can be used as an intravenous injectable or as oral doses for the treatment of arrhythmias, including supraventricular tachyarrhythmia, premature ventricular contractions, ventricular tachycardia, ventricular fibrillation, and atrial fibrillation. See, e.g ., U.S. Patent Nos. 8,541,464 and 8,637,566. Preparation of sulcardine sulfate salt has been reported in U.S. Patent No. 6,605,635.

[0004] In addition, the evidence to date suggests that one advantage of sulcardine and its salts is that they lack significant pro-arrhythmic activity, as demonstrated in rigorous preclinical safety models, including a post-MI sudden-death conscious canine model and the validated rabbit ventricular wedge model. Additionally, it has been shown that they do not significantly increase defibrillation threshold, nor increase defibrillation failure risk in a post-MI canine model as was seen with flecainide. On the basis of these data, sulcardine and salts, with their very low apparent pro-arrhythmic potential, could potentially be used to treat acute and recurrent atrial fibrillation in the presence of organic heart disease, prolonged QR syndrome, and ventricular arrhythmias, including premature ventricular contractions (PVCs), ventricular tachycardia (VT), and ventricular fibrillation (VF), in either acute- or chronic-administration settings owing to their ability to be formulated into intravenous and oral dosing formulations.

Sulcardine has a chemical name of 4-methoxy-N-(3,5-bis-(l-pyrrolidinylmethyl)- 4-hydroxybenzyl)benzene sulfonamide (or N-(4-hydroxy-3,5-bis(pyrrolidin-l-ylmethyl)benzyl)-4-methoxybenzenesulfonamide), and has the following structure:

[0062] Sulcardine sulfate has the following structure:

[0063] Sulcardine sulfate can exist in a hydrated form. One such form is a trihydrate.

HPLC analysis was performed on a Dionex Ultimate 3000 instrument with the following parameters:

Column: Phenomenex Luna C18, 150×4.6mm, 5pm

Column Temperature: 30°C

Mobile Phase A: 0.2% Phosphoric Acid

Mobile Phase B: Methanol

Diluent: 50:50 MeOH:H₂0

Runtime: 12 minutes

Flow Rate: l.OmL/min

Injection Volume: 5pL

Detection: 237 nm

Gradient:

EXAMPLE 2 – PREPARATION OF FREE BASE AND SCREENING

[00348] Sulcardine sulfate trihydrate was dissolved in ethyl acetate (16 vol.) and saturated sodium bicarbonate solution (16 vol.). The biphasic solution was transferred to a separating funnel and the layers separated. The organic layer was dried over sodium sulfate and then the solvent was removed by rotary evaporation and the resulting oil dried under vacuum at ambient temperature for ca. 3 hr. FIG. 4 is an XRPD pattern of the resulted amorphous sulcardine free base. In all cases, the initial screening work detailed below was performed on 10 mg of sulcardine free base. All XRPD diffractograms were compared with sulcardine sulfate trihydrate, sulcardine free base and relevant counterions and found to be distinct.

Patent

WO2020123824

claiming treatment of atrial fibrillation (AF) by intravenously administering sulcardine sulfate .

PATENT

US6605635

References

^ Jump up to:^a ^b Jiangsu Furui Pharmaceuticals (November 5, 2010). “Efficacy and safety of sulcardine sulfate tablets in patients with premature ventricular contractions”. ClinicalTrials.gov. U.S. National Library of Medicine. Retrieved 2019-12-20.
^ “HUYA Bioscience Int’l announces clinical trial milestones in China for promising new anti-arrhythmic compound; Data supports desirable safety profile” (Press release). San Francisco, California: HUYA Bioscience International. Retrieved 2019-12-20.
^ Jump up to:^a ^b Mashal, Abdallah; Katz, Amos; Shvartzman, Pesach (2011). “Atrial fibrillation: A primary care cross-sectional study”. Israel Medical Association Journal. 13 (11): 666–671. PMID 22279699.
^ Farkas, András; Leprán, István; Papp, Julius Gy. (1998). “Comparison of the antiarrhythmic and the proarrhythmic effect of almokalant in anaesthetised rabbits”. European Journal of Pharmacology. 346 (2–3): 245–253. doi:10.1016/S0014-2999(98)00067-3. PMID 9652366.
^ Jump up to:^a ^b ^c ^d Guo, Donglin; Liu, Que; Liu, Tengxian; Elliott, Gary; Gingras, Mireille; Kowey, Peter R.; Yan, Gan-Xin (2011). “Electrophysiological properties of HBI-3000: A new antiarrhythmic agent with multiple-channel blocking properties in human ventricular myocytes”. Journal of Cardiovascular Pharmacology. 57 (1): 79–85. doi:10.1097/FJC.0b013e3181ffe8b3. PMID 20980921.
^ Lee, Julia Y.; Gingras, Mireille; Lucchesi, Benedict R. (2010). “HBI-3000 prevents sudden cardiac death in a conscious canine model”. Heart Rhythm. 7 (11): 1712. doi:10.1016/j.hrthm.2010.09.028.

HBI-3000
Names

IUPAC name N-({4-Hydroxy-3,5-bis[(pyrrolidin-1-yl)methyl]phenyl}methyl)-4-methoxybenzene-1-sulfonamide
Identifiers
CAS Number	343935-60-4 343935-61-5 (sulfate)
3D model (JSmol)	Interactive image
ChemSpider	8318784
PubChem CID	10143275
UNII	4Q5HLV8HG1 4NDN0NJZ62 (sulfate)
InChI [hide] InChI=1S/C24H33N3O4S/c1-31-22-6-8-23(9-7-22)32(29,30)25-16-19-14-20(17-26-10-2-3-11-26)24(28)21(15-19)18-27-12-4-5-13-27/h6-9,14-15,25,28H,2-5,10-13,16-18H2,1H3 Key: SYZGIWXQGIBJGN-UHFFFAOYSA-N InChI=1/C24H33N3O4S/c1-31-22-6-8-23(9-7-22)32(29,30)25-16-19-14-20(17-26-10-2-3-11-26)24(28)21(15-19)18-27-12-4-5-13-27/h6-9,14-15,25,28H,2-5,10-13,16-18H2,1H3 Key: SYZGIWXQGIBJGN-UHFFFAOYAK
SMILES [hide] O=S(=O)(c1ccc(OC)cc1)NCc2cc(c(O)c(c2)CN3CCCC3)CN4CCCC4
Properties
Chemical formula	C₂₄H₃₃N₃O₄S
Molar mass	459.61 g·mol⁻¹
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

////////////////sulcardine sulfate, phase 2, china, HBI 3000, atrial fibrillation, B 87823,

COC1=CC=C(C=C1)S(=O)(=O)NCC2=CC(=C(C(=C2)CN3CCCC3)O)CN4CCCC4

Diquafosol

July 30, 2020 3:28 am / Leave a comment

ChemSpider 2D Image | Diquafosol | C18H26N4O23P4

Diquafosol

Molecular FormulaC₁₈H₂₆N₄O₂₃P₄
Average mass790.307 Da

{Oxybis[(hydroxyphosphoryl)oxy]}bis[hydrogéno(phosphonate)] de bis{[(2R,3S,4R,5R)-5-(2,4-dioxo-3,4-dihydro-1(2H)-pyrimidinyl)-3,4-dihydroxytétrahydro-2-furanyl]méthyle}

59985-21-6 [RN]

7828VC80FJ

8326

Bis{[(2R,3S,4R,5R)-5-(2,4-dioxo-3,4-dihydro-1(2H)-pyrimidinyl)-3,4-dihydroxytetrahydro-2-furanyl]methyl} {oxybis[(hydroxyphosphoryl)oxy]}bis[hydrogen (phosphonate)]

Diquafosol tetrasodium

Molecular FormulaC₁₈H₂₂N₄Na₄O₂₃P₄
Average mass878.234 Da

1) uridine, 5′-(pentahydrogen tetraphosphate), P”’->5′-ester with uridine, tetrasodium salt

211427-08-6[RN]

Diquafosol tetrasodium[USAN]

uridine(5′)tetraphospho(5′)uridine tetrasodium salt

Diquafosol tetrasodium (USAN)

INS365

P1,P4-Diuridine 5′-tetraphosphate tetrasodium salt

Prolacria

U2P4

UNII:X8T9SBH9LL

INS-365; DE-089; KPY-998

Title: Diquafosol

CAS Registry Number: 59985-21-6

CAS Name: Uridine 5¢-(pentahydrogen tetraphosphate) P¢¢¢®5¢-ester with uridine

Additional Names:P1,P4-diuridine 5¢-tetraphosphate; UP4U

Molecular Formula: C18H26N4O23P4

Molecular Weight: 790.31

Percent Composition: C 27.36%, H 3.32%, N 7.09%, O 46.56%, P 15.68%

Literature References: Uridine nucleotide analog. P2Y2 purinoceptor agonist; stimulates mucin secretion from goblet cells. Prepn: M. J. Stutts, III et al.,WO9640059 (1996 to Univ. North Carolina at Chapel Hill); and receptor activity: W. Pendergast et al.,Bioorg. Med. Chem. Lett.11, 157 (2001). Ocular pharmacology: T. Fujihara et al.,J. Ocul. Pharmacol. Ther.18, 363 (2002). Review of development and therapeutic potential: J. Fischbarg, Curr. Opin. Invest. Drugs4, 1377-1383 (2003); K. K. Nichols et al.,Expert Opin. Invest. Drugs13, 47-54 (2004). Clinical trial in dry eye disease: J. Tauber et al., Cornea23, 784 (2004).

Derivative Type: Tetrasodium salt

CAS Registry Number: 211427-08-6

Manufacturers’ Codes: INS-365

Molecular Formula: C18H22N4Na4O23P4

Molecular Weight: 878.23

Percent Composition: C 24.62%, H 2.52%, N 6.38%, Na 10.47%, O 41.90%, P 14.11%

Therap-Cat: In treatment of dry eye disease.

Keywords: Purinoceptor P2Y Agonist.

Company：: Santen (Originator)
Sales：: $80 Million (Y2015);
$71.7 Million (Y2014);
$79.3 Million (Y2013);
$67.1 Million (Y2012);
$36 Million (Y2011);
ATC Code：: S01

Approved Countries or Area 2010-04-16, JAPAN

Diquafosol tetrasodium was approved by Pharmaceuticals Medical Devices Agency of Japan (PMDA) on April 16, 2010. It was developed and marketed as Diquas^® by Santen Pharmaceutical Corporation in Japan.

Diquafosol tetrasodium is a P2Y2 purinoceptor receptor agonist. It is indicated for improve dry eye symptoms by promoting secretion of mucin and water, thereby bringing the tear film closer to a normal state. No serious ocular or systemic adverse drug reactions were found during the clinical trials. Dry eye begins with symptoms of ocular discomfort such as burning, stinging or a foreign body sensation.

Diquas^® is available as solution for ophthalmic use, containing 3% of Diquafosol tetrasodium. The recommended dose is 1 drop at a time, 6 times a day.

Index：

Diquafosol (tradename Diquas) is a pharmaceutical drug for the treatment of dry eye disease. It was approved for use in Japan in 2010.^[1] It is formulated as a 3% ophthalmic solution of the tetrasodium salt.

Its mechanism of action involves agonism of the P2Y2 purinogenic receptor.^[2]

SYN

INS-365 can also been obtained by the following ways: 4) Dimerization of uridine-5′-monophosphate tributyl-ammonium salt (I) with bis(tributylammonium) pyrophosphate (II) by means of CDI, followed by purification by semipreparative ion璭xchange chromatography. 5) Dimerization of uridine-5′-monophosphate tributyl-ammonium salt (I) with pyrophosphoryl chloride (III) in pyridine, followed by chromatographic purification as before. 6) Condensation of uridine (IV) with POCl3 and bis(tributylammonium) pyrophosphate (II) by means of tributylamine in trimethyl phosphate, followed by chromatographic purification as before. 7) Dimerization of uridine-5′-diphosphate tributylammonium salt (V) by means of CDI in DMF, followed by purification over Dowex 50Wx4 Na+. 8) Condensation of uridine-5′-triphosphate tributylammonium salt (VI) with uridine-5′-monophosphate tributyl-ammonium salt (I) by means of DCC in DMF, followed by chromatographic purification as before. 9) Reaction of uridine-5′-monophosphate tributylammonium salt (I) with CDI in DMF, followed by condensation with uridine-5′-triphosphate (VI) and chromatographic purification as before.

CLIP

China

Route 1

Reference：1. WO9905155A2.

Route 2

Reference：1. WO1999005155.

2. Bioorg. Med. Chem. Lett. 2001, 11, 157-160.

Route 3

Reference：1. WO1999005155.

Route 4

Reference：1. WO2014103704.

SYN

Practical and Efficient Approach to the Preparation of Diquafosol Tetrasodium

- Pengfei Xu

Cite this: Org. Process Res. Dev. 2020, XXXX, XXX, XXX-XXX

Publication Date:June 30, 2020

https://doi.org/10.1021/acs.oprd.0c00209

https://pubs.acs.org/doi/suppl/10.1021/acs.oprd.0c00209/suppl_file/op0c00209_si_001.pdf

https://pubs.acs.org/doi/10.1021/acs.oprd.0c00209

A scalable and practical route to synthesize the P2Y2 receptor agonist diquafosol tetrasodium has been described. Diquafosol tetrasodium was obtained via a four-step process starting from commercially available 5′-uridylic acid disodium salt. The whole procedure gives the target product in a 45% overall yield with high purity (>99%). Key steps in this process including isolation of impurities and the target product by using anion-exchange resin are discussed in detail. The optimized process has been successfully demonstrated on a large scale to support the development of diquafosol tetrasodium in China.

References

^ “Santen and Inspire Announce Approval of DIQUAS for Dry Eye Treatment in Japan”. April 16, 2010.
^ Pendergast, W; Yerxa, BR; Douglass Jg, 3rd; Shaver, SR; Dougherty, RW; Redick, CC; Sims, IF; Rideout, JL (2001). “Synthesis and P2Y receptor activity of a series of uridine dinucleoside 5′-polyphosphates”. Bioorganic & Medicinal Chemistry Letters. 11 (2): 157–60. doi:10.1016/S0960-894X(00)00612-0. PMID 11206448.

Diquafosol
Names

IUPAC name [[[[(2R,3S,4R,5R)-5-(2,4-Dioxopyrimidin-1-yl)-3,4-dihydroxy-tetrahydrofuran-2-yl]methoxy-hydroxy-phosphoryl]oxy-hydroxy-phosphoryl]oxy-hydroxy-phosphoryl] [(2R,3S,4R,5R)-5-(2,4-dioxopyrimidin-1-yl)-3,4-dihydroxy-tetrahydrofuran-2-yl]methyl hydrogen phosphate
Other names P1,P4-Bis(5′-uridyl) tetraphosphate; INS-365; Diquafosol tetrasodium
Identifiers
CAS Number	59985-21-6 211427-08-6 (tetrasodium salt)
3D model (JSmol)	Interactive image
ChEMBL	ChEMBL1767408 ChEMBL221326
ChemSpider	130647 130646 (tetrasodium salt)
IUPHAR/BPS	1736
PubChem CID	148197 148196 (tetrasodium salt)
UNII	7828VC80FJ
CompTox Dashboard (EPA)	DTXSID40208689
InChI [show]
SMILES [show]
Properties
Chemical formula	C₁₈H₂₆N₄O₂₃P₄
Molar mass	790.306 g·mol⁻¹
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

///////////// INS 365, Diquafosol, INS-365, DE 089, KPY 998, JAPAN 16

59985-21-6 (Diquafosol );
211427-08-6 (Diquafosol Tetrasodium);

BAY 1895344

July 27, 2020 9:00 am / 1 Comment on BAY 1895344

BAY-1895344 Structure

BAY 1895344

1876467-74-1 (free base)

(R)-3-methyl-4-(4-(1-methyl-1H-pyrazol-5-yl)-8-(1H-pyrazol-3-yl)-1,7-naphthyridin-2-yl)morpholine, monohydrochloride

BAY-1895344 hydrochloride Chemical Structure

BAY-1895344

Molecular Weight	411.89
Formula	C₂₀H₂₂ClN₇O

BAY-1895344 (hydrochloride)

1876467-74-1

1876467-74-1(free base)

s8666, CCG-268786, CS-7574, HY-101566A

BAY-1895344 hydrochloride is a potent, orally available and selective ATR inhibitor, with IC₅₀ of 7 nM. Anti-tumor activity.

NMR https://file.selleckchem.com/downloads/nmr/S866603-BAY-1895344-hnmr-selleck.pdf

Biological Activity

In vitro, BAY 1895344 was shown to be a very potent and highly selective ATR inhibitor (IC50 = 7 nM), which potently inhibits proliferation of a broad spectrum of human tumor cell lines (median IC50 = 78 nM). In cellular mechanistic assays BAY 1895344 potently inhibited hydroxyurea-induced H2AX phosphorylation (IC50 = 36 nM). Moreover, BAY 1895344 revealed significantly improved aqueous solubility, bioavailability across species and no activity in the hERG patch-clamp assay. BAY 1895344 also demonstrated very promising efficacy in monotherapy in DNA damage deficient tumor models as well as combination treatment with DNA damage inducing therapies.

Conversion of different model animals based on BSA (Value based on data from FDA Draft Guidelines)

Species	Mouse	Rat	Rabbit	Guinea pig	Hamster	Dog
Weight (kg)	0.02	0.15	1.8	0.4	0.08	10
Body Surface Area (m²)	0.007	0.025	0.15	0.05	0.02	0.5
K_m factor	3	6	12	8	5	20

Animal A (mg/kg) = Animal B (mg/kg) multiplied by	Animal B K_m
	Animal A K_m

For example, to modify the dose of resveratrol used for a mouse (22.4 mg/kg) to a dose based on the BSA for a rat, multiply 22.4 mg/kg by the K_m factor for a mouse and then divide by the K_m factor for a rat. This calculation results in a rat equivalent dose for resveratrol of 11.2 mg/kg.

Chemical Information

Molecular Weight	375.43
Formula	C₂₀H₂₁N₇O
CAS Number	1876467-74-1
Purity	98.69%

Solubility	10 mM in DMSO
Storage	at -20°C

PAPER

Damage Incorporated: Discovery of the Potent, Highly Selective, Orally Available ATR Inhibitor BAY 1895344 with Favorable Pharmacokinetic Properties and Promising Efficacy in Monotherapy and in Combination Treatments in Preclinical Tumor Models

Journal of Medicinal Chemistry 2020, 63, 13, 7293-7325 (Article)

Publication Date (Web):June 5, 2020DOI: 10.1021/acs.jmedchem.0c00369

https://pubs.acs.org/doi/full/10.1021/acs.jmedchem.0c00369

2-[(3R)-3-Methylmorpholin-4-yl]-4-(1-methyl-1Hpyrazol-5-yl)-8-(1H-pyrazol-5-yl)-1,7-naphthyridine (BAY 1895344). Sulfonate 67 (500 mg, 0.95 mmol), 1- methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)- 1H-pyrazole (68) (415 mg, 1.90 mmol), 2 M aq K2CO3 solution (1.4 mL), and Pd(PPh3)2Cl2 (67 mg, 0.094 mmol) were solubilized in DME (60 mL). The reaction mixture was stirred for 20 min at 130 °C under microwave irradiation. After cooling to rt, the mixture was filtered through a silicon filter and concentrated under reduced pressure. The crude material was purified by flash column chromatography (silica gel, hexane/EtOAc gradient 0–100%, followed by EtOAc/EtOH 9:1). The desired fractions were concentrated under reduced pressure and solubilized in concd H2SO4 (5 mL). The mixture was stirred for 3 h at rt. The mixture was then poured into ice and basified using solid NaHCO3. The suspension was filtered and the solid was stirred with EtOH at 40 °C, filtered, and dried under reduced pressure to give BAY 1895344 (280 mg, 0.75 mmol, 78%). LC-MS [Method 2]: Rt = 0.99 min. MS (ESI+): m/z = 376.1 [M+H]+ . 1H NMR (400 MHz, DMSO-d6): δ = 13.44 (br s, 1H, pyrazole-NH), 8.35 (d, J = 5.32 Hz, 1H, naphthyridine), 7.56–7.68 (m, 3H, pyrazole, naphthyridine), 7.42 (br s, 1H, pyrazole), 7.27 (d, J = 5.58 Hz, 1H, naphthyridine), 6.59 (d, J = 2.03 Hz, 1H, pyrazole), 4.60–4.69 (m, 1H, morpholine), 4.23 (br d, J = 11.66 Hz, 1H, morpholine), 4.00–4.09 (m, 1H, morpholine), 3.78–3.85 (m, 1H, morpholine), 3.75 (m, 4H, methyl, morpholine), 3.69–3.74 (m, 1H, morpholine), 3.57 (m, 1H, morpholine), 1.30 (d, J = 6.59 Hz, 3H, methyl). 13C NMR (125 MHz, DMSO-d6): δ = 156.5, 145.2, 140.0, 139.6, 139.5, 138.2, 137.4, 137.4, 125.7, 117.1, 115.5, 108.2, 107.7, 70.3, 66.1, 47.3, 39.7, 37.2, 13.3. ESI-HRMS: m/z [M+H]+ calcd for C20H22N7O: 376.1886, found: 376.1879. [α]D –80.8 ± 1.04 (1.0000 g/ 100 mL CHCl3).

References

Identification of potent, highly selective and orally available ATR inhibitor BAY 1895344 with favorable PK properties and promising efficacy in monotherapy and combination in preclinical tumor models
Ulrich T, et al. AACR. 2017 July;77(13 Suppl):Abstract nr 983.

ATR inhibitor BAY 1895344 shows potent anti-tumor efficacy in monotherapy and strong combination potential with the targeted alpha therapy Radium-223 dichloride in preclinical tumor models
Antje Margret Wengner, et al. AACR 2017 July;77(13 Suppl):Abstract nr 836.

////////////s8666, CCG-268786, CS-7574, HY-101566A, BAY-1895344, BAY 1895344

CC1COCCN1C2=NC3=C(C=CN=C3C4=CC=NN4)C(=C2)C5=CC=NN5C

MK 5204

July 26, 2020 11:02 am / Leave a comment

MK 5204

(1R,5S,6R,7R,10R,11R,14R,15S,20R,21R)-21-[(2R)-2-Amino-2,3,3-trimethylbutoxy]-20-(5-carbamoyl-1,2,4-triazol-1-yl)-5,7,10,15-tetramethyl-7-[(2R)-3-methylbutan-2-yl]-17-oxapentacyclo[13.3.3.01,14.02,11.05,10]henicos-2-ene-6-carboxylic acid.png

CAS No:	1207751-75-4
Product Code:	BM178545

(1R,5S,6R,7R,10R,11R,14R,15S,20R,21R)-21-[(2R)-2-amino-2,3,3-trimethylbutoxy]-20-(5-carbamoyl-1,2,4-triazol-1-yl)-5,7,10,15-tetramethyl-7-[(2R)-3-methylbutan-2-yl]-17-oxapentacyclo[13.3.3.01,14.02,11.05,10]henicos-2-ene-6-carboxylic acid

MF: C₄₀H₆₅N₅O₅

MW: 696g/mol

MW 695.97

C40 H65 N5 O5

PAPER

https://www.sciencedirect.com/science/article/abs/pii/S0960894X20304686

Abstract

Our previously reported efforts to produce an orally active β-1,3-glucan synthesis inhibitor through the semi-synthetic modification of enfumafungin focused on replacing the C2 acetoxy moiety with an aminotetrazole and the C3 glycoside with a N,N-dimethylaminoether moiety. This work details further optimization of the C2 heterocyclic substituent, which identified 3-carboxamide-1,2,4-triazole as a replacement for the aminotetrazole with comparable antifungal activity. Alkylation of either the carboxamidetriazole at C2 or the aminoether at C3 failed to significantly improve oral efficacy. However, replacement of the isopropyl alpha amino substituent with a t-butyl, improved oral exposure while maintaining antifungal activity. These two structural modifications produced MK-5204, which demonstrated broad spectrum activity against Candida species and robust oral efficacy in a murine model of disseminated Candidiasis without the N-dealkylation liability observed for the previous lead.

MK-5204: An orally active β-1,3-glucan synthesis inhibitor ...

patent

https://patentscope.wipo.int/search/en/detail.jsf?docId=US43243783&tab=PCTDESCRIPTION&_cid=P22-KD34BU-17225-1

Patent ID	Title	Submitted Date	Granted Date
US8188085	Antifungal agents	2010-05-06	2012-05-29

ungal infection is a major healthcare problem, and the incidence of hospital-acquired fungal diseases continues to rise. Severe systemic fungal infection in hospitals (such as candidiasis, aspergillosis, histoplasmosis, blastomycosis and coccidioidomycosis) is commonly seen in neutropaenic patients following chemotherapy and in other oncology patients with immune suppression, in patients who are immune-compromised due to Acquired Immune Deficiency Syndrome (AIDS) caused by HIV infection, and in patients in intensive care. Systemic fungal infections cause ˜25% of infection-related deaths in leukaemics. Infections due to Candida species are the fourth most important cause of nosocomial bloodstream infection. Serious fungal infections may cause 5-10% of deaths in patients undergoing lung, pancreas or liver transplantation. Treatment failures are still very common with all systemic mycoses. Secondary resistance also arises. Thus, there remains an increasing need for effective new therapy against mycotic infections.

Enfumafungin is a hemiacetal triterpene glycoside that is produced in fermentations of a Hormonema spp. associated with living leaves of Juniperus communis (U.S. Pat. No. 5,756,472; Pelaez et al., Systematic and Applied Microbiology, 23:333-343, 2000; Schwartz et al., JACS, 122:4882-4886, 2000; Schwartz, R. E., Expert Opinion on Therapeutic Patents, 11(11):1761-1772, 2001). Enfumafungin is one of the several triterpene glycosides that have in vitro antifungal activities. The mode of the antifungal action of enfumafungin and other antifungal triterpenoid glycosides was determined to be the inhibition of fungal cell wall glucan synthesis by their specific action on (1,3)-β-D-glucan synthase (Onishi et al., Antimicrobial Agents and Chemotherapy, 44:368-377, 2000; Pelaez et al., Systematic and Applied Microbiology, 23:333-343, 2000). 1,3-β-D-Glucan synthase remains an attractive target for antifungal drug action because it is present in many pathogenic fungi which affords broad antifungal spectrum and there is no mammalian counterpart and as such, compounds inhibiting 1,3-β-D-Glucan synthase have little or no mechanism-based toxicity.

SIMILAR BUT NOT SAME

METHOXY EXAMPLE

Example 8

(1S,4aR,6aS,7R,8R,10aR,10bR,12aR,14R,15R)-15-[[(2R)-2-amino-2,3-dimethylbutyl]oxy]-8-[(1R)-1,2-dimethylpropyl]-14-[3-(methoxycarbonyl)-1H-1,2,4-triazol-1-yl]-1,6,6a,7,8,9,10,10a,10b,11,12,12a-dodecahydro-1,6a,8,10a-tetramethyl-4H-1,4a-propano-2H-phenanthro[1,2-c]pyran-7-carboxylic acid (EXAMPLE 8A) and (1S,4aR,6aS,7R,8R,10aR,10bR,12aR,14R,15R)-15-[[(2R)-2-amino-2,3-dimethylbutyl]oxy]-8-[(1R)-1,2-dimethylpropyl]-14-[5-(methoxycarbonyl)-1H-1,2,4-triazol-1-yl]-1,6,6a,7,8,9,10,10a,10b,11,12,12a-dodecahydro-1,6a,8,10a-tetramethyl-4H-1,4a-propano-2H-phenanthro[1,2-c]pyran-7-carboxylic acid (EXAMPLE 8B)

(MOL) (CDX)

Methyl 1,2,4-triazole-3-carboxylate (27.1 mg, 0.213 mmol) and BF ₃OEt ₂(54 μl, 0.426 mmol) were added to a stirred solution of Intermediate 6 (25.9 mg, 0.043 mmol) in 1,2-dichloroethane (0.43 ml). The reaction mixture was a light yellow suspension that was heated at 50° C. for 7.5 hr and then stirred at room temperature for 64 hr. The solvent was evaporated and the resulting residue was placed under high vacuum. The residue was dissolved in methanol and separated using a single HPLC run on a 19×150 mm Sunfire Prep C18 OBD 10 μm column by eluting with acetonitrile/water+0.1% TFA. The HPLC fractions of the faster eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 8A (8.9 mg, 10.97 μmol) as a white solid. The HPLC fractions of the slower eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 8B (1.5 mg, 1.85 μmol) as a white solid.

Example 8A

¹H NMR (CD ₃OD, 600 MHz, ppm) δ 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.79 (d, 3H, Me), 0.83 (d, 3H, Me), 0.85 (d, 3H, Me), 0.88 (s, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.35 (m), 1.39-1.44 (m), 1.47-1.65 (m), 1.78-2.02 (m), 2.10-2.22 (m), 2.46 (dd, 1H, H13), 2.66 (d, 1H), 2.83 (s, 1H, H7), 3.48 (d, 1H), 3.50 (d, 1H), 3.53 (dd, 1H), 3.60 (d, 1H), 3.77 (d, 1H), 3.92 (d, 1H), 3.95 (s, 3H, COOMe), 5.48 (dd, 1H, H5), 5.61-5.68 (m, 1H, H14), 8.77 (broad s, 1H, triazole).

Mass Spectrum: (ESI) m/z=697.42 (M+H).

Example 8B

¹H NMR (CD ₃OD, 600 MHz, ppm) δ 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.79 (s, 3H, Me), 0.79 (d, 3H, Me), 0.82 (d, 3H, Me), 0.85 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 1.13 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.36 (m), 1.39-1.44 (m), 1.47-1.55 (m), 1.59-1.65 (m), 1.72-1.96 (m), 2.10-2.22 (m), 2.46 (dd, 1H, H13), 2.78 (d, 1H), 2.84 (s, 1H, H7), 3.48 (d, 1H), 3.50 (d, 1H), 3.55 (dd, 1H), 3.62 (d, 1H), 3.93 (d, 1H), 3.98 (d, 1H), 3.99 (s, 3H, COOMe), 5.47 (dd, 1H, H5), 6.53-6.59 (m, 1H, H14), 8.14 (s, 1H, triazole).

Mass Spectrum: (ESI) m/z=697.42 (M+H).

EP-2326172-B1

US-20100113439-A1

/////////////MK 5204, BM178545

NC(=O)c6ncnn6[C@@H]1C[C@]45COC[C@@](C)([C@H]1OC[C@](C)(N)C(C)(C)C)[C@@H]5CC[C@H]3C4=CC[C@@]2(C)[C@H](C(=O)O)[C@](C)(CC[C@@]23C)[C@H](C)C(C)C

CC(C)C(C)C1(CCC2(C3CCC4C5(COCC4(C3=CCC2(C1C(=O)O)C)CC(C5OCC(C)(C(C)(C)C)N)N6C(=NC=N6)C(=O)N)C)C)C

SELGANTOLIMOD

July 25, 2020 9:07 am / Leave a comment

2D chemical structure of 2004677-13-6

SELGANTOLIMOD

GS 9688

RN: 2004677-13-6
UNII: RM4GJT3SMQ

Molecular Formula, C14-H20-F-N5-O,

Molecular Weight, 293.344

1-Hexanol, 2-((2-amino-7-fluoropyrido(3,2-d)pyrimidin-4-yl)amino)-2-methyl-, (2R)-

(2R)-2-((2-Amino-7-fluoropyrido(3,2-d)pyrimidin-4-yl)amino)-2-methylhexan-1-ol

Discovery of GS–9688 (Selgantolimod) as a Potent and Selective Oral Toll-Like Receptor 8 Agonist for the Treatment of Chronic Hepatitis B

Journal of Medicinal Chemistry, Articles ASAP (Drug Annotation)

Publication Date (Web):May 14, 2020DOI: 10.1021/acs.jmedchem.0c00100

https://pubs.acs.org/doi/suppl/10.1021/acs.jmedchem.0c00100/suppl_file/jm0c00100_si_002.pd

PATENTS

Patent ID	Title	Submitted Date
US2019192504	Therapeutic heterocyclic compounds	2018-08-20
US2017281627	TOLL LIKE RECEPTOR MODULATOR COMPOUNDS	2017-04-25
US2017071944	MODULATORS OF TOLL-LIKE RECEPTORS FOR THE TREATMENT OF HIV	2016-09-13
US9670205	TOLL LIKE RECEPTOR MODULATOR COMPOUNDS	2016-03-02

Patent

https://patentscope.wipo.int/search/en/detail.jsf?docId=US178076456&tab=PCTDESCRIPTION&_cid=P21-KD1F9D-27923-1

EXAMPLE 63

(MOL) (CDX)

Synthesis of methyl 2-amino-2-methylhexanoate (63A. To a mixture of (2R)-2-amino-2-methylhexanoic acid hydrochloride (50 mg, 0.28 mmol) and (2S)-2-amino-2-methylhexanoic acid hydrochloride (50 mg, 0.28 mmol) in MeOH (5.0 mL) was added (trimethylsilyl) diazomethane in hexanes (2 M, 0.41 mL, 0.83 mmol) dropwise. After 6 h, the reaction was quenched with AcOH (100 μL). The mixture was concentrated in vacuo to provide 63A that was used without further isolation. LCMS (m/z): 159.91 [M+H] ⁺; t _R=0.57 min. on LC/MS Method A.

Synthesis of methyl 2-((2-((2,4-dimethoxybenzyl)amino)-7-fluoropyrido[3,2-d]pyrimidin-4-yl)amino)-2-methylhexanoate (63B). To a solution of 84E (120 mg, 0.55 mmol) in THF (5 mL) was added 63A (88 mg, 0.55 mmol) and N,N-diisopropylethylamine (0.3 mL, 1.7 mmol). After stirring at 80° C. for 18 h, the reaction was cooled to rt, diluted with EtOAc (50 mL), washed with water (50 mL) and brine (50 mL), dried over Na ₂SO ₄, then filtered and concentrated in vacuo. The crude residue was then diluted with THF (10 mL) and 2,4-dimethoxybenzylamine (0.4 mL, 2.6 mmol) and N,N-diisopropylethylamine (0.3 mL, 1.7 mmol) were added. After stirring at 100° C. for 18 h, the reaction was cooled to rt, diluted with EtOAc (50 mL), washed with water and brine, dried over Na ₂SO ₄, then filtered and concentrated in vacuo. The residue was subjected to silica gel chromatography eluting with hexanes-EtOAc to provide 63B. ¹H NMR (400 MHz, Chloroform-d) δ 8.14 (d, J=2.5 Hz, 1H), 7.36 (s, 1H), 7.28-7.24 (m, 2H), 6.46 (d, J=2.3 Hz, 1H), 6.41 (dd, J=8.3, 2.4 Hz, 1H), 4.54 (dd, J=6.2, 2.7 Hz, 2H), 3.84 (s, 3H), 3.78 (s, 3H), 3.69 (s, 3H), 2.27-2.16 (m, 1H), 2.02 (s, 1H), 1.71 (s, 3H), 1.34-1.23 (m, 5H), 0.88 (t, J=6.9 Hz, 3H). ¹⁹F NMR (376 MHz, Chloroform-d) δ −121.51 (d, J=422.9 Hz). LCMS (m/z): 472.21 [M+H] ⁺; t _R=0.91 min. on LC/MS Method A.

Synthesis of 2-((2-((2,4-dimethoxybenzyl)amino)-7-fluoropyrido[3,2-d]pyrimidin-4-yl)amino)-2-methylhexan-1-ol (63C). To a solution of 63B (104 mg, 0.22 mmol) in THF (5 mL) was added lithium aluminum hydride in Et ₂O (2M, 0.30 mL, 0.60 mmol). After 5 h the reaction was quenched with H ₂O (1 mL) and 2M NaOH _(aq), and then filtered. The mother liquor was then diluted with EtOAc (30 mL), washed with sat. Rochelle’s salt solution (25 mL), H ₂O (25 mL), and brine (25 mL), dried over Na ₂SO ₄, then filtered and concentrated in vacuo. The residue was subjected to silica gel chromatography eluting with hexanes-EtOAc to provide 63C. ¹H NMR (400 MHz, Chloroform-d) δ 8.12 (d, J=2.5 Hz, 1H), 7.32 (s, 1H), 7.28 (s, 1H), 6.46 (d, J=2.4 Hz, 1H), 6.42 (dd, J=8.2, 2.4 Hz, 1H), 4.57-4.52 (m, 2H), 3.84 (s, 3H), 3.79 (s, 4H), 3.75 (s, 2H), 1.92 (d, J=14.1 Hz, 1H), 1.74 (t, J=12.6 Hz, 1H), 1.40-1.37 (m, 3H), 1.32 (td, J=13.4, 12.4, 6.3 Hz, 4H), 0.91 (t, J=7.0 Hz, 3H). ¹⁹F NMR (377 MHz, Chloroform-d) δ −121.34. LCMS (m/z): 444.20 [M+H] ⁺; t _R=0.94 min. on LC/MS Method A

Synthesis of 2-((2-amino-7-fluoropyrido[3,2-d]pyrimidin-4-yl)amino)-2-methylhexan-1-ol (63). To 63C (22 mg, 0.05 mmol) was added TFA (3 mL). After 30 minutes, the reaction mixture was diluted with MeOH (5 mL). After stirring for 18 h, the mixture was filtered and concentrated in vacuo. Co-evaporation with MeOH (×3) provided 63 as a TFA salt. ¹H NMR (400 MHz, MeOH-d ₄) δ 8.53 (d, J=2.4 Hz, 1H), 8.20 (s, 1H), 7.65 (dd, J=8.8, 2.4 Hz, 1H), 3.95 (s, 1H), 3.70 (d, J=11.2 Hz, 1H), 2.09 (ddd, J=13.9, 10.9, 5.3 Hz, 1H), 1.96-1.86 (m, 1H), 1.53 (s, 3H), 1.42-1.28 (m, 6H), 0.95-0.87 (m, 3H). ¹⁹F NMR (377 MHz, MeOH-d ₄) δ −77.47, −118.23 (d, J=8.6 Hz). LCMS (m/z): 294.12 [M+H] ⁺; t _R=0.68 min. on LC/MS Method A.

EXAMPLE 64

(MOL) (CDX)

Synthesis of (S)-2-amino-2-methylhexan-1-ol (64A). To (2S)-2-amino-2-methylhexanoic acid hydrochloride (250 mg, 1.4 mmol, supplied by Astatech) in THF (5 mL) was added borane-tetrahydrofuran complex solution in THF (1M, 5.5 mL) dropwise over 5 minutes. After 24 h, the reaction was quenched with MeOH (1 mL) and concentrated in vacuo. The residue was taken up in DCM (10 mL), filtered, and concentrated in vacuo to provide crude 64A. LCMS (m/z): 131.92 [M+H] ⁺; t _R=0.57 min. on LC/MS Method A.

Synthesis of (S)-2-((2-amino-7-fluoropyrido[3,2-d]pyrimidin-4-yl)amino)-2-methylhexan-1-ol (64). To a solution of 43B (140 mg, 78 mmol) and 64A (125 mg, 0.95 mmol) in NMP (7.5 mL), was added DBU (0.35 mL, 2.4 mmol) followed by BOP (419 mg, 0.95 mmol). After 16 h, the reaction mixture was subjected to prep HPLC (Gemini 10u C18 110A, AXIA; 10% aq. acetonitrile—50% aq. acetonitrile with 0.1% TFA, over 20 min. gradient) to provide, after removal of volatiles in vacuo, 64 as a TFA salt. ¹H NMR (400 MHz, MeOH-d ₄) δ 8.55 (d, J=2.4 Hz, 1H), 8.22 (s, 1H), 7.64 (dd, J=8.7, 2.5 Hz, 1H), 3.97 (d, J=11.2 Hz, 1H), 3.71 (d, J=11.2 Hz, 1H), 2.09 (ddd, J=13.9, 10.8, 5.2 Hz, 1H), 1.92 (ddd, J=13.6, 10.9, 5.4 Hz, 1H), 1.54 (s, 4H), 1.40-1.31 (m, 5H), 1.00-0.85 (m, 3H). ¹⁹F NMR (377 MHz, MeOH-d ₄) δ −77.62, −118.22 (d, J=8.7 Hz). LCMS (m/z) 294.09 [M+H] ⁺; t _R=0.79 min. on LC/MS Method A.

EXAMPLE 65

(MOL) (CDX)

Synthesis of (R)-N-(2-((2-amino-7-chloropyrido[3,2-d]pyrimidin-4-yl)amino)-2-methylhexyl)acetamide (65A). To a solution of 19B (112 mg, 0.48 mmol) in THF (5 mL) was added 61E (100 mg, 0.48 mmol) and N,N-diisopropylethylamine (0.25 mL, 1.4 mmol). After stirring at 80° C. for 18 h, 2,4-dimethoxybenzylamine (0.75 mL, 5.0 mmol) was added and the mixture was heated to 100° C. After 18 h, the reaction was cooled to rt, diluted with EtOAc (50 mL), washed with water (50 mL) and brine (50 mL), dried over Na ₂SO ₄, then filtered and concentrated in vacuo. The residue was subjected to silica gel chromatography eluting with hexanes-EtOAc to provide 65A LCMS (m/z): 509.30[M+H] ⁺; t _R=0.89 min. on LC/MS Method A.

Synthesis of (R)-N-(2-((2-amino-7-chloropyrido[3,2-d]pyrimidin-4-yl)amino)-2-methylhexyl)acetamide (65). To 65A (21 mg, 0.04 mmol) was added TFA (3 mL). After 30 minutes, the mixture was concentrated in vacuo and the residue co-evaporated with MeOH (10 mL×3). The resulting residue was suspended in MeOH (10 mL), filtered, and concentrated in vacuo to provide 65 as a TFA salt. ¹H NMR (400 MHz, MeOH-d ₄) δ 8.59 (d, J=2.1 Hz, 1H), 8.58 (s, 1H), 7.91 (d, J=2.1 Hz, 1H), 3.93 (d, J=14.0 Hz, 1H), 3.52 (d, J=14.0 Hz, 1H), 2.22-2.10 (m, 1H), 1.96 (s, 3H), 1.95-1.87 (m, 1H), 1.54 (s, 3H), 1.34 (dd, J=7.5, 3.9 Hz, 5H), 0.94-0.89 (m, 3H). ¹⁹F NMR (377 MHz, MeOH-d ₄) δ −77.91. LCMS (m/z): 351.29 [M+H] ⁺; t _R=0.69 min. on LC/MS Method A.

/////////////GS 9688, SELGANTOLIMOD

CCCC[C@@](C)(CO)Nc1nc(N)nc2cc(F)cnc12

	shivkr2 on SPSR Excellence Award 2025 – S…
	Bonkasaurus on Infigratinib phosphate
	PALOVAROTENE \| ORGAN… on Palovarotene
	Pfizer just purchase… on Temanogrel
	Pfizer To Cash In On… on Temanogrel

No.	Major Technical Classification	Publication No.	Patent No.	Legal Status	Filling Date	Estimated Expiry Date
1	Uses	CN1211186A		Withdrawn	1997/2/14
2	Uses	CN1233181A	CN1229114C	Granted	1997/3/27	2017/3/27
3	Uses	CN1227491A		Withdrawn	1997/7/3
4	Uses	CN1226169A		Withdrawn	1997/7/23
5	Uses	CN1236318A	CN1115152C	Granted	1997/10/21	2017/10/21
6	Formulation	CN1250369A	CN1151775C	Granted	1998/2/6	2018/2/6
7	Salt	CN1265114A	CN1147502C	Granted	1998/7/24	2018/7/24
8	Uses	CN1348378A		Withdrawn	1999/11/19
9	Uses	CN1413113A		Withdrawn	2000/12/22
10	Uses	CN1431914A	CN100391538C	Granted	2001/5/30	2021/5/30
11	Uses	CN1501940A	CN100465186C	Granted/abandoned	2001/8/20	2011/8/20
12	Formulation	CN1406586A	CN1228053C	Granted	2002/9/10	2022/9/10
13	Uses	CN1612739A		Withdrawn	2002/11/6
14	Formulation	CN103096929A		Examination	2011/9/9
15	Formulation	CN103282039A		Examination	2011/12/27
16	Formulation	CN104203254A		Examination	2013/3/25

Yearly Archives: 2020

SEARCH THIS BLOG

Blog Stats

Flag and hits

Follow Blog via Email

Pages

Archives

Categories

Recent Posts

ORGANIC SPECTROSCOPY

SUBSCRIBE

Follow Blog via Email

Verified Services

Pages

Archives

Categories

Recent Comments

SEARCH THIS BLOG

History

References

External links

Share this:

ClinicalTrials.gov

EU Clinical Trials Register

Share this:

Share this:

Availability and Marketing in the USA

Adverse effects

Chemistry

Synthesis

EXAMPLES

Example 1: Preparation of methyl 2-chloro-2-ethyl-3-oxobutanoate

Example 2: Preparation of 3-chloropentan-2-one

Example 3: Preparation of 3-chloropentan-2-one

Example 4: Preparation of 2-(2-oxopentan-3-yl)cyclohexane-1,3-dione (4)

Example 5: Preparation of 2-methyl-3-ethyl-4-oxo-4,5,6,7-tetrahydroindole (5)

Example 6: Preparation of 2-methyl-3-ethyl-4-oxo-4,5,6,7-tetrahydroindole (5)

Example 7: Preparation of Molindone Hydrochloride

References

Share this:

REFERENCES

Share this:

The molecular problem

Mechanism of action in ventricular myocytes

Studies

Animal model

Human studies

References

Share this:

Diquafosol tetrasodium

Index：

Practical and Efficient Approach to the Preparation of Diquafosol Tetrasodium

Share this:

Biological Activity

Conversion of different model animals based on BSA (Value based on data from FDA Draft Guidelines)

Chemical Information

References

Share this:

Abstract

Example 8A

Example 8B

Share this:

1-Hexanol, 2-((2-amino-7-fluoropyrido(3,2-d)pyrimidin-4-yl)amino)-2-methyl-, (2R)-

(2R)-2-((2-Amino-7-fluoropyrido(3,2-d)pyrimidin-4-yl)amino)-2-methylhexan-1-ol

EXAMPLE 63

EXAMPLE 64

EXAMPLE 65

Share this:

Post navigation

SEARCH THIS BLOG

FLAGS AND HITS

Follow Blog via Email